Products catalog

  • Deflector adapter D100–125 | rubber adapter for D160 deflector

    Code: 100-125

    Flexible rubber adapter for connecting a D160 deflector or ventilation outlet to a Ø100–125 mm duct. Inserted into the base, no additional fixing required.

  • Deflector adapter D100–125

    The adapter connects the D160 deflector system to a smaller-diameter duct – Ø100 or Ø125 mm. It is inserted into the deflector base and is not visible from outside.

    Key point

    The flexible material compensates for minor dimensional deviations, so the joint is tight and does not whistle. No additional fixing is required.

    Connection diameter
    Ø100–125 mm
    Material
    Thermoplastic elastomer
    Type
    Adapter
    Colour
    Black

    How it works

    • The adapter is inserted into the deflector or outlet base.
    • A Ø100–125 mm duct is inserted into it.
    • The flexible material seals the joint.

    Technical specifications

    Product type Rubber adapter / reducer
    Purpose Connecting a D160 deflector to a Ø100–125 mm duct
    Installation Inserted into the deflector base
    Material Styrenic thermoplastic elastomer
    Dimensions 162 × 162 × 35 mm
    Outer / inner diameter 100 / 125 mm
    Weight 0.13 kg
    Colour Black

    Where it is used

    • Connecting domestic ventilation ducts to a deflector
    • Connecting an old Ø100 duct during renovation
    • Ventilation outlet D125/160 system

    Installation diagram: common mistakes and the correct way

    Deflector adapter D100–125 – installation diagram: wrong and right | elsprendimai.eu
    ☝ Click the diagram to open an enlarged version.
    ⚠ The diagram is for guidance only and may contain inaccuracies. Before installation, check it against the manufacturer's instructions and the roofing requirements.
    Responsibility for installation lies with the qualified specialist performing it. UAB „Elektrotechnikos sprendimai“ is not liable for installation or possible errors.
    ☝ Elsprendimai.eu recommends:

    ✓ Pros

    • Tight joint without whistling
    • Compensates for minor dimensional deviations
    • No additional fixing required

    → Limitations

    • Intended for Ø100–125 mm ducts

    ⚠ Installation and maintenance

    • Insert fully so that there are no gaps.
    • Insert the duct without strain.

    FAQ

    Which ducts is it suitable for?

    Ø100 and Ø125 mm.

    Is glue or a clamp needed?

    No – the flexible material holds by itself.

    Is it visible from outside?

    No – the adapter is fitted inside.

    In short

    Rubber adapter D100–125 – a sealed connection of a Ø100–125 mm duct to the D160 deflector system. Unsure about the size or roofing? Send us the duct diameter and roof type – we will help you choose.

    Phone: +370 620 72733
    E-mail: info@elsprendimai.eu

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Fan with backdraft damper | D100 | 230V | with controller | 155x155x101mm | plastic | white
    Code: 16191

    A universal wall-mounted fan with an integrated backdraft damper and 6-mode controller designed for reliable, quiet, and efficient air extraction from bathrooms, showers, kitchens, and other household areas. The fan is built to deliver high performance (90 m³/h) while remaining ultra-quiet (only 25 dB(A)) and consuming very little electricity (just 8.4 W).

    A built-in blue LED indicator on the front panel shows the fan’s operation status, and the axial fan with a ball bearing allows for both horizontal and vertical installation – perfectly adaptable to various installation conditions. Easy installation, reliable construction, and modern control make the device suitable for both professional installers and home users without any hassle. 

    Price 32.67 € VAT incl.
    ( 27.00 € VAT excl. )
    Flexible aluminum air duct | for ventilation | ventilation systems | D160mm | 3,15m | silver | LAO160U
    Code: 18721

    Flexible aluminum air duct - a reliable solution for various ventilation, air circulation and air extraction systems. Thanks to the 80 micron thick aluminum foil, the duct is durable, resistant to high temperature and maintains its shape even under demanding operating conditions.

    The lightweight, flexible and easy-to-install duct is suitable for connecting fans, heat recovery systems, air extraction ducts, kitchen hoods and other ventilation components. 

    Price 8.62 € VAT incl.
    ( 7.12 € VAT excl. )
  • Subscribtion to new arrivals

    privacy policy

    Information