Decorative Acoustic Wall | Ceiling Panel | Slatted Panel | Interior Cladding | 2400x600x22mm | MDF + PET | Natural Oiled Oak

Decorative Acoustic MDF Slat Panel – 2400×600×22 mm, Natural Oak Veneer, Black PET Felt, NRC 0.8, Oiled Oak

Decorative acoustic wall and ceiling panel made of MDF slats covered with natural oak veneer and sound-absorbing black PET fibre felt. It is designed for interior finishing, improving room acoustics and reducing the effect of unwanted echo and sound reflections.

Natural veneer in an oiled oak shade retains the texture of real wood, grain direction and natural surface variations. The warm, richer oak tone contrasts with the black acoustic PET backing, helping to create a natural, solid and expressive wall or ceiling surface.

The declared sound absorption coefficient is NRC 0.8. The actual sound absorption effect depends on the panel installation method, covered surface area, complete construction and room conditions.

• helps reduce echo in the room;
• reduces some unwanted sound reflections;
• may improve speech intelligibility;
• helps reduce the perception of reverberation;
• may contribute to a more comfortable working and living environment;
• suitable for residential, workplace and commercial interiors.

The MDF slats are covered with natural oak veneer in an oiled oak shade. Veneer is a thin layer of real wood, therefore the surface retains the natural wood texture, grain direction, pattern variation and colour transitions.

• genuine natural wood surface;
• warm and richer oak shade;
• visible natural longitudinal wood grain;
• lighter and darker wood tones may be visible;
• the grain pattern of each slat may vary slightly;
• matches black, white, grey and beige surfaces;
• suitable for modern, classic and minimalist interiors;
• can be combined with concrete, glass, metal and stone finishes.

The rear backing of the panel is made of black compressed PET fibre felt. The PET felt forms the acoustic backing to which the MDF slats are attached and also creates a contrasting background between the warm oak-coloured slats.

• absorbs part of the sound reaching the panel;
• helps reduce room reverberation;
• creates a contrasting background between the oak slats;
• emphasises the rhythm and geometry of the slats;
• forms the base for the MDF slats;
• helps reduce the effect of sound reflected from hard surfaces.

The slats are made using MDF board with the specified emission class CARB P2.

• MDF board with controlled formaldehyde emissions;
• provides a stable base for natural veneer;
• helps maintain consistent slat shape;
• suitable for interior finishing products;
• suitable for normal dry indoor conditions.

The provided technical information indicates that acoustic PET felt, depending on the specific material version and testing system, may have different fire classifications:

• EN 13501-1:2018 classification;
• ASTM E84 Class A classification;
• a B1 flame-retardant PET felt version may also be available.

• Natural oak veneer – for a genuine wood surface.
• Oiled oak shade – for a warm and richer interior.
• Black PET felt – creates a strong contrast between the slats.
• Sound absorption – helps reduce echo and reverberation in the room.
• NRC 0.8 – declared sound absorption rating.
• MDF base – provides a stable slat construction.
• Natural wood grain – each panel may vary slightly.
• Installation with screws or suitable adhesive – depending on the substrate.
• Suitable for walls and ceilings.
• One panel covers 1.44 m².

• Living rooms – for TV walls or relaxation areas.
• Bedrooms – for walls behind beds and creating a cosy interior.
• Home offices – for reducing echo and sound reflections.
• Work offices – for natural and solid-looking interior finishing.
• Meeting rooms – for improving speech intelligibility.
• Hotels – for rooms and common areas.
• Restaurants and cafés – for improving acoustic comfort.
• Reception areas – as a representative natural wood background.
• Studios – for partial control of sound reflections.
• Educational spaces – for reducing reverberation.
• Retail spaces – as a warm and expressive interior accent.
• Ceiling finishing – as a decorative and sound-absorbing surface.

For example, an acoustic slat wall in an oiled oak shade can be installed behind a television in a living room. The 2400 mm long panels can be installed vertically while maintaining a consistent slat rhythm.

The black PET felt is visible between the slats covered with warm oak veneer, creating a distinctive contrast. The dark background emphasises the geometry of the slats, while the natural wood texture and richer oak tone give the surface warmth and a solid appearance.

The PET acoustic backing helps absorb part of the sound travelling through the room and reflected from hard surfaces. The perception of echo may be reduced, while the wall becomes a decorative interior feature.

If greater sound absorption is required, the panels can be installed on a framework with an air gap and, if necessary, an additional acoustic mineral wool layer.

For home users: suitable for living rooms, bedrooms, TV walls, home offices or other spaces where a genuine oak surface, warm richer tone and improved room acoustics are desired.

For interior designers: natural oak veneer, an oiled oak tone and black PET backing allow warm, contrasting vertical or horizontal slat compositions to be created. Natural variations in veneer pattern and colour give the surface an individual character.

For offices and commercial spaces: can be used in meeting rooms, offices, reception areas, hotels, restaurants, cafés and other spaces where both representative natural wood finishing and reduced echo and reverberation are important.

For acoustic improvement: suitable for rooms with many hard, sound-reflective surfaces. The panels help absorb part of the sound energy and reduce unwanted sound reflections within the room.

For installers: the panels can be installed vertically or horizontally, cut to the required dimensions and adapted around electrical sockets, switches and other interior elements. When cutting, protect the natural veneer surface from chipping. Reliable mechanical fixing is recommended for ceilings.

1. Measure the wall or ceiling. Calculate the required number of panels and allow extra material for cutting.
2. Check the substrate. It must be dry, solid, level and free from loose finishing layers.
3. Acclimatise the panels. Before installation, keep them in the room where they will be installed.
4. Lay out the panels before fixing. Consider natural variations in veneer shade and grain and select the most suitable arrangement.
5. Plan the slat direction. Decide whether the panels will be installed vertically or horizontally.
6. Mark the position of the first panel. Use a spirit level or laser level.
7. Cut the panel if necessary. Use a suitable fine-toothed woodworking cutting tool for MDF slats and a sharp knife for the PET felt. Protect the veneer from chipping.
8. When using adhesive, apply the mounting adhesive according to the adhesive manufacturer's instructions.
9. When using screws, fix the panel through the PET backing. Fixing points can be positioned between the slats.
10. Check the slat direction and spacing. Adjacent panels should form a consistent composition.
11. Cut openings for sockets and switches only after accurately marking their positions.
12. Finish visible edges. If necessary, use suitable finishing profiles or other edge-finishing solutions.
13. Remove dust after installation using a soft brush or vacuum cleaner.

• Remove dust using a vacuum cleaner with a soft brush attachment.
• Clean the veneered surface with a dry, soft cloth.
• Clean the gaps between the slats with a soft brush.
• Do not use excessive water.
• Do not spray cleaning products directly onto the veneer.
• Do not use abrasive products or aggressive solvents.
• Prevent moisture from entering the cut edges of the MDF and veneer.

• The panel is intended for dry indoor areas.
• Do not use in locations where direct exposure to water is possible.
• MDF and natural veneer are not intended for continuous exposure to high humidity.
• Acclimatise the panels in the installation room before installation.
• Before installation, lay out the panels and match the natural wood tones.
• Check the actual panel and slat dimensions before cutting.
• Protect the natural veneer from chipping when cutting.
• The colour name “Oiled Oak” does not by itself confirm that the surface has actually been oiled.
• Use fixing elements suitable for the substrate and panel weight.
• Mechanical fixing is recommended for ceilings.
• The suitability of adhesive-only installation on ceilings must be verified according to the technical specifications of the adhesive used.
• Disconnect the power supply before working around electrical equipment.
• The panel is not a structural or load-bearing element.
• The NRC 0.8 result depends on the complete installation system and covered area.

Quick Selection Guide

Choose the acoustic slat panel in an oiled oak shade with natural oak veneer and black PET felt when you need a genuine wood surface, a warm and richer interior accent, expressive slat contrast and improved acoustic comfort in the room.

Natural Oak Veneer, Warm Oiled Oak Tone and Improved Room Acoustics

The decorative acoustic panel combines MDF slats, natural oak veneer and a black sound-absorbing PET fibre backing. The warm oiled oak shade adds a natural and cosy character to the interior, while the black gaps between the slats emphasise their geometry and rhythm.

The declared NRC 0.8 sound absorption coefficient and PET acoustic backing help reduce sound reflections, echo and reverberation within the room. The panels can be used in residential, workplace and commercial interiors.

One 2400×600×22 mm panel covers 1.44 m² and can be installed vertically or horizontally. For improved acoustic performance, the panels can be installed on a framework with an air gap and an additional sound-absorbing layer.