Decorative Acoustic Wall | Ceiling Panel | Slatted Panel | Interior Cladding | 2400x600x22mm | MDF + PET | Natural Smoked Oak

Decorative Acoustic MDF Slat Panel – 2400×600×22 mm, Natural Oak Veneer, Black PET Felt, NRC 0.8, Smoked Oak

Decorative acoustic wall and ceiling panel made of MDF slats covered with natural oak veneer and sound-absorbing black PET fiber felt. It is designed for interior finishing, improving room acoustics and reducing the impact of unwanted echo and sound reflections.

Natural smoked oak veneer retains the texture of real wood, grain direction and natural surface variations. The muted grey-brown oak tone contrasts with the black acoustic PET backing and helps create a restrained, solid and expressive wall or ceiling surface.

The declared sound absorption coefficient is NRC 0.8. The actual sound absorption performance depends on the panel installation method, covered surface area, overall construction and room conditions.

• helps reduce echo in the room;
• reduces some unwanted sound reflections;
• may improve speech intelligibility;
• helps reduce the perception of reverberation;
• may contribute to a more pleasant working and relaxation environment;
• suitable for residential, work and commercial indoor spaces.

The surface of the MDF slats is covered with natural oak veneer in a smoked oak tone. Veneer is a thin layer of real wood, therefore the surface retains natural wood texture, grain direction, pattern variation and colour transitions.

• genuine natural wood surface;
• muted grey-brown oak tone;
• visible natural longitudinal wood grain;
• lighter and darker wood tones may be visible;
• the grain pattern of each slat may vary slightly;
• matches black, white, grey and beige surfaces;
• suitable for modern, industrial and minimalist interiors;
• can be combined with concrete, glass, metal and stone finishes.

The rear backing of the panel is made of black compressed PET fiber felt. PET felt forms the acoustic backing to which the MDF slats are attached and also creates a contrasting background between the smoked oak-coloured slats.

• absorbs part of the sound reaching the panel;
• helps reduce room reverberation;
• creates a contrasting background between the grey-brown oak slats;
• emphasizes the rhythm and geometry of the slats;
• forms the base for the MDF slats;
• helps reduce the impact of sound reflected from hard surfaces.

The slats are made using MDF board with a declared emission class of CARB P2.

• MDF board with controlled formaldehyde emissions;
• provides a stable base for the natural veneer;
• helps maintain a consistent slat shape;
• suitable for interior finishing products;
• intended for use under normal dry indoor conditions.

The provided technical data indicates that the acoustic PET felt may have different fire classifications depending on the specific material version and testing system:

• EN 13501-1:2018 classification;
• ASTM E84 Class A classification;
• a B1 flame-retardant PET felt version may also be available.

• Natural oak veneer – provides a genuine wood surface.
• Smoked oak tone – creates a restrained, richer interior.
• Black PET felt – creates a strong contrast between the slats.
• Sound absorption – helps reduce echo and reverberation in the room.
• NRC 0.8 – declared sound absorption rating.
• MDF base – provides a stable slat structure.
• Natural wood grain – each panel may vary slightly.
• Installation with screws or suitable adhesive – depending on the substrate.
• Suitable for walls and ceilings.
• One panel covers 1.44 m².

• Living rooms – for TV walls or relaxation areas.
• Bedrooms – behind the bed and for a restrained interior design.
• Home offices – to reduce echo and sound reflections.
• Work offices – for natural and solid interior finishing.
• Meeting rooms – to improve speech intelligibility.
• Hotels – in rooms and common areas.
• Restaurants and cafés – to improve acoustic comfort.
• Reception areas – as a representative natural wood background.
• Studios – for partial control of sound reflections.
• Training rooms – to reduce reverberation.
• Retail spaces – as a restrained and expressive interior accent.
• Ceiling finishing – as a decorative and sound-absorbing surface.

For example, a smoked oak acoustic slat wall can be installed behind a television in a living room. The 2400 mm long panels are installed vertically, maintaining a consistent slat rhythm.

Black PET felt is visible between the grey-brown natural oak veneered slats, creating a strong yet restrained contrast. The dark background emphasizes the geometry of the slats, while the natural wood texture gives the surface depth and individuality.

The PET acoustic backing helps absorb part of the sound travelling through the room and reflected from hard surfaces. The perception of echo may be reduced, while the wall becomes a decorative interior feature.

If greater sound absorption is required, the panels can be installed on a framework with an air gap and, if necessary, an additional acoustic mineral wool layer.

For home users: suitable for living rooms, bedrooms, TV walls, home offices or other spaces where a genuine oak surface, muted grey-brown tone and improved room acoustics are desired.

For interior designers: natural oak veneer, smoked oak tone and black PET backing allow restrained, contrasting vertical or horizontal slat compositions to be created. Natural variations in veneer pattern and colour give the surface an individual character.

For offices or commercial spaces: can be used in meeting rooms, offices, reception areas, hotels, restaurants, cafés and other spaces where both representative natural wood finishing and reduction of echo and reverberation are important.

For acoustic improvement: suitable for rooms with many hard sound-reflecting surfaces. The panels help absorb part of the sound energy and reduce unwanted sound reflections within the room.

For installers: the panels can be installed vertically or horizontally, cut to the required dimensions and adapted around electrical sockets, switches or other interior elements. When cutting, the natural veneer surface should be protected against chipping. Reliable mechanical fastening is recommended for ceilings.

1. Measure the wall or ceiling. Calculate the required number of panels and allow for cutting waste.
2. Check the substrate. It must be dry, solid, level and free from loose finishing layers.
3. Acclimatise the panels. Before installation, keep them in the room where they will be installed.
4. Lay out the panels before fastening. Consider natural variations in veneer colour and grain and select the most suitable arrangement.
5. Plan the slat direction. Decide whether the panels will be installed vertically or horizontally.
6. Mark the position of the first panel. Use a spirit level or laser level.
7. Cut the panel if necessary. Use a suitable fine-toothed wood cutting tool for MDF slats and a sharp knife for PET felt. Protect the veneer against chipping.
8. For adhesive installation, apply the mounting adhesive according to the adhesive manufacturer's instructions.
9. For screw installation, fasten the panel through the PET backing. Fastening points can be positioned between the slats.
10. Check the slat direction and spacing. Adjacent panels should form a consistent composition.
11. Cut openings for sockets and switches only after accurately marking their positions.
12. Finish visible edges. If necessary, use suitable finishing profiles or other edge-finishing solutions.
13. Remove dust after installation using a soft brush or vacuum cleaner.

• Remove dust with a vacuum cleaner fitted with a soft brush attachment.
• Clean the veneered surface with a dry, soft cloth.
• Clean the gaps between the slats with a soft brush.
• Do not use excessive water.
• Do not spray cleaning products directly onto the veneer.
• Do not use abrasive products or aggressive solvents.
• Do not allow moisture to enter the MDF or cut edges of the veneer.

• The panel is intended for dry indoor spaces.
• Do not use in areas where direct water exposure is possible.
• MDF and natural veneer are not intended for continuous exposure to high humidity.
• Acclimatise the panels in the installation room before installation.
• Arrange the panels before installation and match the natural wood tones.
• Check the actual panel and slat dimensions before cutting.
• Protect the natural veneer from chipping when cutting.
• The colour name “Smoked Oak” does not by itself confirm an actual wood smoking process.
• Use fasteners suitable for the substrate and panel weight.
• Mechanical fastening is recommended for ceilings.
• The suitability of adhesive alone for ceiling installation must be checked according to the technical conditions of the adhesive used.
• Disconnect the power supply before installation around electrical equipment.
• The panel is not a structural or load-bearing element.
• The NRC 0.8 result depends on the complete installation system and covered area.

Quick Selection Guide

Choose the smoked oak acoustic slat panel with natural oak veneer and black PET felt when you need a genuine wood surface, a restrained grey-brown interior accent, strong slat contrast and improved acoustic comfort in the room.

Natural Smoked Oak Veneer and Expressive Black Acoustic Backing

The decorative acoustic panel combines MDF slats, natural oak veneer and a black sound-absorbing PET fiber backing. The muted grey-brown smoked oak tone gives the interior a restrained and solid character, while the black gaps between the slats emphasize their geometry and rhythm.

The declared NRC 0.8 sound absorption coefficient and PET acoustic backing help reduce sound reflections, echo and reverberation within the room. The panels can be used in residential, work and commercial indoor spaces.

One 2400×600×22 mm panel covers 1.44 m² and can be installed vertically or horizontally. For improved acoustic performance, the panels can be installed on a framework with an air gap and an additional sound-absorbing layer.