Decorative Acoustic Wall | Ceiling Panel | Slatted Panel | Interior Cladding | 2400x600x22mm | MDF + PET | Natural Walnut

Decorative Acoustic MDF Slat Panel – 2400×600×22 mm, Natural Walnut Veneer, Black PET Felt, NRC 0.8

Decorative acoustic wall and ceiling panel consisting of MDF slats covered with natural walnut veneer and sound-absorbing black PET fiber felt. It is designed for interior finishing, improving room acoustics and reducing the effect of unwanted echo and sound reflections.

Natural walnut veneer retains the texture of real wood, longitudinal grain pattern and natural color variations. The warm brown slats contrast with the black acoustic PET backing, creating a solid, expressive and rhythmic wall or ceiling surface.

The declared sound absorption coefficient is NRC 0.8. The actual sound absorption performance depends on the panel installation method, covered surface area, overall construction and room conditions.

• helps reduce echo in the room;
• reduces some unwanted sound reflections;
• can improve speech intelligibility;
• helps reduce the perception of reverberation;
• can contribute to a more comfortable working and living environment;
• is suitable for residential, working and commercial indoor spaces.

The surface of the MDF slats is covered with natural walnut veneer. Veneer is a thin layer of real wood, therefore the surface retains the natural wood texture, grain direction, pattern variation and natural color transitions.

• genuine natural wood surface;
• warm brown walnut tone;
• lighter and darker brown shades may be visible;
• distinctive longitudinal wood grain;
• the pattern of each slat may vary slightly;
• matches black, white, grey and beige surfaces;
• suitable for modern, classic and minimalist interiors;
• can be combined with concrete, glass, metal and stone finishes.

The rear backing of the panel is made of black compressed PET fiber felt. The PET felt forms the acoustic backing to which the MDF slats are attached and also creates a contrasting background between the walnut-colored slats.

• absorbs part of the sound reaching the panel;
• helps reduce room reverberation;
• creates a contrasting background between the walnut slats;
• emphasizes the rhythm and geometry of the slats;
• forms the backing for the MDF slats;
• helps reduce the effect of sound reflected from hard surfaces.

The slats are made using an MDF board with the specified emission class CARB P2.

• MDF board with controlled formaldehyde emissions;
• provides a stable base for the natural veneer;
• helps maintain a consistent slat shape;
• suitable for interior finishing products;
• intended for use under normal dry indoor conditions.

The provided technical data indicates that the acoustic PET felt may have different fire classifications depending on the specific material version and testing system:

• EN 13501-1:2018 classification;
• ASTM E84 Class A classification;
• a flame-retardant B1 PET felt version may also be available.

• Natural walnut veneer – for a genuine wood surface.
• Warm walnut tone – for a solid and natural interior.
• Black PET felt – creates contrast between the slats.
• Sound absorption – helps reduce echo and reverberation in the room.
• NRC 0.8 – declared sound absorption rating.
• MDF base – provides a stable slat construction.
• Natural wood grain – each panel may vary slightly.
• Installation with screws or suitable adhesive – depending on the substrate.
• Suitable for walls and ceilings.
• One panel covers 1.44 m².

• Living rooms – for TV walls or relaxation areas.
• Bedrooms – for walls behind beds and creating a cozier interior.
• Home offices – for reducing echo and sound reflections.
• Office rooms – for a solid natural wood finish.
• Meeting rooms – for improving speech intelligibility.
• Hotels – for rooms and common areas.
• Restaurants and cafés – for improving acoustic comfort.
• Reception areas – for a representative wood-effect background.
• Studios – for partial control of sound reflections.
• Training rooms – for reducing reverberation.
• Retail spaces – as a warm and expressive interior accent.
• Ceiling finishing – as a decorative and sound-absorbing surface.

For example, a natural walnut acoustic slat wall can be installed behind a television in a living room. The 2400 mm long panels can be installed vertically, maintaining a consistent slat rhythm.

The black PET felt is visible between the warm walnut veneer-covered slats, creating an expressive contrast. The dark background emphasizes the geometry of the slats, while the natural wood texture gives the surface warmth and individuality.

The PET acoustic backing helps absorb part of the sound travelling through the room and reflected from hard surfaces. The perception of echo may be reduced, while the wall becomes a decorative interior feature.

If greater sound absorption is required, the panels can be installed on a frame, leaving an air gap and, if necessary, using an additional layer of acoustic mineral wool.

For home users: suitable for living rooms, bedrooms, TV walls, home offices or other spaces where a genuine walnut wood surface is desired together with improved room acoustics.

For interior designers: natural walnut veneer and black PET backing allow warm, contrasting vertical or horizontal slat compositions to be created. Natural variations in veneer pattern and color give the surface an individual appearance.

For offices and commercial spaces: can be used in meeting rooms, offices, reception areas, hotels, restaurants, cafés and other spaces where both a representative natural wood finish and reduced echo and reverberation are important.

For acoustic improvement: suitable for rooms containing many hard, sound-reflecting surfaces. The panels help absorb part of the sound energy and reduce unwanted sound reflections within the room.

For installers: the panels can be installed vertically or horizontally, cut to the required dimensions and adapted around electrical sockets, switches and other interior elements. When cutting, protect the natural veneer surface against chipping. Reliable mechanical fastening is recommended for ceilings.

1. Measure the wall or ceiling. Calculate the required number of panels and allow additional material for cutting.
2. Check the substrate. It must be dry, solid, level and free from loose finishing layers.
3. Acclimatize the panels. Before installation, keep them in the room where they will be installed.
4. Lay out the panels before fastening them. Consider natural variations in veneer color and grain and select the most suitable arrangement.
5. Plan the slat direction. Decide whether the panels will be installed vertically or horizontally.
6. Mark the position of the first panel. Use a spirit level or laser level.
7. Cut the panel if required. Use a suitable fine-tooth wood cutting tool for MDF slats and a sharp knife for the PET felt. Protect the veneer from chipping.
8. When installing with adhesive, apply the mounting adhesive according to the adhesive manufacturer's instructions.
9. When installing with screws, fasten the panel through the PET backing. Fastening points can be positioned between the slats.
10. Check the slat direction and spacing. Adjacent panels should form a consistent composition.
11. Cut openings for sockets and switches only after accurately marking their positions.
12. Finish visible edges. If required, use suitable finishing profiles or other edge finishing solutions.
13. Remove dust after installation using a soft brush or vacuum cleaner.

• Remove dust with a vacuum cleaner using a soft brush attachment.
• Clean the veneered surface with a dry, soft cloth.
• Clean the gaps between the slats with a soft brush.
• Do not use excessive water.
• Do not spray cleaning products directly onto the veneer.
• Do not use abrasive products or aggressive solvents.
• Prevent moisture from entering the MDF and cut edges of the veneer.

• The panel is intended for dry indoor spaces.
• Do not use in locations exposed to direct water.
• MDF and natural veneer are not intended for continuous exposure to high humidity.
• Acclimatize the panels in the installation room before installation.
• Before installation, lay out the panels and match the natural wood shades.
• Check the actual panel and slat dimensions before cutting.
• Protect the natural veneer from chipping when cutting.
• Use fasteners suitable for the substrate and panel weight.
• Mechanical fastening is recommended for ceilings.
• Suitability of adhesive-only installation on ceilings must be verified according to the technical requirements of the adhesive used.
• Disconnect the power supply before working around electrical equipment.
• The panel is not a structural or load-bearing element.
• The NRC 0.8 result depends on the complete installation system and covered area.

Quick Selection Guide

Choose the natural walnut veneered acoustic slat panel with black PET felt when you need a genuine wood surface, a warm and rich interior accent, expressive slat contrast and improved acoustic comfort in the room.

Rich Walnut Finish and Improved Room Acoustics

The decorative acoustic panel combines MDF slats, natural walnut veneer and a black sound-absorbing PET fiber backing. The warm brown wood tone adds coziness and a solid character to the interior, while the black gaps between the slats emphasize their geometry and rhythm.

The declared NRC 0.8 sound absorption coefficient and PET acoustic backing help reduce sound reflections, echo and reverberation within the room. The panels can be used in residential, working and commercial indoor spaces.

One 2400×600×22 mm panel covers 1.44 m² and can be installed vertically or horizontally. For improved acoustic performance, the panels can be installed on a frame with an air gap and an additional sound-absorbing layer.