Decorative Acoustic Wall | Ceiling Panel | Slatted Panel | Interior Cladding | 2400x600x22mm | MDF + PET | Natural White Ash

Decorative Acoustic MDF Slat Panel – 2400×600×22 mm, Natural Ash Veneer, Black PET Felt, NRC 0.8, Light / Bleached Ash

Decorative acoustic wall and ceiling panel consisting of MDF slats covered with natural ash veneer and sound-absorbing black PET fibre felt. It is designed for interior finishing, improving room acoustics and reducing the impact of unwanted echo and sound reflections.

Light / bleached ash natural veneer retains the texture, grain direction and natural variations characteristic of real wood. The light slats contrast with the black acoustic PET backing, creating an expressive, modern and rhythmic wall or ceiling surface.

The declared sound absorption coefficient is NRC 0.8. The actual sound absorption performance depends on the panel installation method, covered surface area, overall construction and room conditions.

• helps reduce echo in the room;
• reduces some unwanted sound reflections;
• may improve speech intelligibility;
• helps reduce the perception of reverberation;
• may contribute to a more comfortable working and relaxing environment;
• suitable for residential, work and commercial interior spaces.

The surface of the MDF slats is covered with natural ash veneer in a light or bleached ash shade. Veneer is a thin layer of real wood, so the natural wood grain, texture and individual characteristics remain visible on the surface.

• genuine natural wood surface;
• light, warm and neutral shade;
• visible natural ash texture and longitudinal grain;
• the grain pattern of each slat may vary slightly;
• matches white, grey, beige and black surfaces;
• suitable for Scandinavian, minimalist and modern interiors;
• can be combined with concrete, glass, metal and stone finishes.

The rear backing of the panel is made of black compressed PET fibre felt. The PET felt forms the acoustic backing to which the MDF slats are attached and creates a clear contrast between the light ash slats.

• absorbs part of the sound reaching the panel;
• helps reduce room reverberation;
• creates a strong background between the light ash slats;
• emphasises the rhythm and geometry of the slats;
• provides a base for the MDF slats;
• helps reduce the impact of sound reflected from hard surfaces.

The slats are made using MDF board with the specified emission class CARB P2.

• MDF board with controlled formaldehyde emissions;
• provides a stable base for the natural veneer;
• helps maintain a consistent slat shape;
• suitable for interior finishing products;
• intended for use under normal dry indoor conditions.

The provided technical information states that acoustic PET felt may have different fire classifications depending on the specific material version and testing system:

• EN 13501-1:2018 classification;
• ASTM E84 Class A classification;
• an B1 flame-retardant PET felt version may also be available.

• Natural ash veneer – provides a genuine wood surface.
• Light / bleached ash colour – for a light and natural interior.
• Black PET felt – creates a strong contrast between the slats.
• Sound absorption – helps reduce echo and reverberation in the room.
• NRC 0.8 – declared sound absorption rating.
• MDF base – provides a stable slat construction.
• Natural wood grain – each panel may vary slightly.
• Screw or adhesive installation – depending on the substrate.
• Suitable for walls and ceilings.
• One panel covers 1.44 m².

• Living rooms – for TV walls or relaxation areas.
• Bedrooms – for light and natural wall finishing.
• Home offices – to reduce echo and sound reflections.
• Office rooms – for natural wood and acoustic finishing.
• Meeting rooms – to improve speech intelligibility.
• Hotels – for rooms and common areas.
• Restaurants and cafés – to improve acoustic comfort.
• Reception areas – as a representative natural wood background.
• Studios – for partial control of sound reflections.
• Training rooms – to reduce reverberation.
• Retail spaces – as a modern interior accent.
• Ceiling finishing – as a decorative and sound-absorbing surface.

For example, an acoustic slat wall in a light ash finish can be installed behind a television in a living room. The 2400 mm long panels can be installed vertically, maintaining a continuous slat rhythm.

The black PET felt is visible between the light slats covered with natural ash veneer, creating a strong contrast. The dark background emphasises the geometry of the slats, while the natural wood texture adds warmth and individuality to the surface.

The PET acoustic backing helps absorb part of the sound travelling through the room and reflected from hard surfaces. The perception of echo may be reduced, while the wall becomes an expressive interior feature.

If greater sound absorption is required, the panels can be installed on a framework with an air gap and, if necessary, an additional acoustic mineral wool layer.

For home users: suitable for living rooms, bedrooms, TV walls, home offices or other spaces where the aim is to combine a light real wood surface, strong contrast between the light slats and black gaps, and improved room acoustics.

For interior designers: natural ash veneer and the black PET backing allow contrasting vertical or horizontal slat compositions to be created. Natural variations in the veneer grain give each surface an individual appearance.

For offices and commercial spaces: suitable for meeting rooms, offices, reception areas, hotels, restaurants, cafés and other spaces where both a natural interior appearance and reduced echo and reverberation are important.

For improving acoustics: suitable for rooms with many hard sound-reflecting surfaces. The panels help absorb part of the sound energy and reduce unwanted sound reflections within the room.

For installers: the panels can be installed vertically or horizontally, cut to the required dimensions and adapted around electrical sockets, switches and other interior elements. When cutting, the natural veneer surface must be protected against chipping. Reliable mechanical fixing is recommended for ceilings.

1. Measure the wall or ceiling. Calculate the required number of panels and allow an additional cutting margin.
2. Check the substrate. It must be dry, solid, level and free from loose finishing layers.
3. Acclimatise the panels. Before installation, keep them in the room where they will be installed.
4. Lay out the panels before fixing. Consider natural variations in veneer shade and grain and select the most suitable arrangement.
5. Plan the slat direction. Decide whether the panels will be installed vertically or horizontally.
6. Mark the position of the first panel. Use a spirit level or laser level.
7. Cut the panel if necessary. Use a suitable fine-toothed woodworking tool for MDF slats and a sharp knife for PET felt. Protect the veneer from chipping.
8. For adhesive installation, apply mounting adhesive according to the adhesive manufacturer's instructions.
9. For screw installation, fix the panel through the PET backing. Fixing points can be positioned between the slats.
10. Check the slat direction and spacing. Adjacent panels should form a consistent composition.
11. Cut openings for sockets and switches only after accurately marking their positions.
12. Finish visible edges. If necessary, use suitable finishing profiles or other edge-finishing solutions.
13. After installation, remove dust using a soft brush or vacuum cleaner.

• Remove dust using a vacuum cleaner with a soft brush attachment.
• Clean the veneered surface with a dry, soft cloth.
• Clean the gaps between the slats with a soft brush.
• Do not use excessive water.
• Do not spray cleaning products directly onto the veneer.
• Do not use abrasive products or aggressive solvents.
• Do not allow moisture to enter the MDF or cut edges of the veneer.

• The panel is intended for dry indoor spaces.
• Do not use in locations exposed to direct water.
• MDF and natural veneer are not intended for continuous exposure to high humidity.
• Acclimatise the panels in the installation room before installation.
• Before installation, lay out the panels and match natural wood shades.
• Check the actual panel and slat dimensions before cutting.
• Protect the natural veneer from chipping when cutting.
• Use fixing elements suitable for the substrate and panel weight.
• Mechanical fixing is recommended for ceilings.
• The suitability of adhesive-only ceiling installation must be verified according to the technical specifications of the adhesive used.
• Disconnect the power supply before installing around electrical equipment.
• The panel is not a structural or load-bearing element.
• The NRC 0.8 result depends on the complete installation system and covered area.

Quick selection guide

Choose the light / bleached ash acoustic slat panel with black PET felt when you need a genuine wood surface, strong contrast between the light slats and black backing, and improved acoustic comfort in the room.

Natural light ash veneer and expressive black acoustic backing

The decorative acoustic panel combines MDF slats, natural ash veneer and a black sound-absorbing PET fibre backing. The light or bleached ash shade gives the interior a natural appearance, while the black gaps between the slats emphasise their geometry and rhythm.

The declared NRC 0.8 sound absorption coefficient and PET acoustic backing help reduce sound reflections, echo and reverberation within the room. The panels can be used in residential, work and commercial interior spaces.

One 2400×600×22 mm panel covers 1.44 m² and can be installed vertically or horizontally. For improved acoustic performance, the panels can be installed on a framework with an air gap and an additional sound-absorbing layer.