Decorative Acoustic Wall | Ceiling Panel | Slatted Panel | Interior Cladding | 2400x600x22mm | MDF + PET | Natural White Oak

Decorative Acoustic MDF Slat Panel – 2400×600×22 mm, Natural White Oak Veneer, PET Felt, NRC 0.8

Decorative acoustic wall and ceiling panel consisting of MDF slats covered with natural white oak veneer and sound-absorbing PET fibre felt. It is designed for interior finishing, improving room acoustics and reducing the effect of unwanted echo and sound reflections.

Natural white oak veneer retains the texture, grain pattern and natural colour variations of real wood. The light wood surface contrasts with the black acoustic PET backing and helps create a modern, warm and rhythmic wall or ceiling surface.

The declared sound absorption coefficient is NRC 0.8. The actual sound absorption effect depends on the panel installation method, the overall construction and the room conditions.

• helps reduce echo in the room;
• reduces unwanted sound reflections;
• can improve speech intelligibility;
• helps reduce the perception of reverberation;
• suitable for residential, work, communication and leisure spaces.

The surface of the MDF slats is covered with natural white oak veneer. This is a thin layer of real wood, which means the surface retains the natural oak texture, grain direction and characteristic colour variations of wood.

• real natural wood surface;
• light white oak shade;
• naturally visible wood grain;
• each slat may have an individual grain pattern;
• warm and natural surface appearance;
• matches white, black, grey and beige surfaces;
• suitable for Scandinavian, modern and minimalist interiors;
• can be combined with concrete, glass, metal and natural stone.

The slats are made using MDF board with a declared emission class of CARB P2.

• MDF board with controlled formaldehyde emissions;
• suitable for interior finishing products;
• uniform structure helps maintain the shape of the slats;
• provides a stable base for natural wood veneer;
• designed for use under normal dry indoor conditions.

The black rear backing is made from compressed PET fibre. The PET felt forms the acoustic backing to which the MDF slats are attached.

• absorbs part of the sound reaching the panel;
• helps reduce reverberation in the room;
• creates a contrasting background between the light oak slats;
• provides the backing for the MDF slats;
• helps reduce the effect of sound reflected from hard surfaces.

The provided technical information states that the acoustic PET felt may have different fire classifications depending on the specific version and testing system:

• EN 13501-1:2018 classification;
• ASTM E84 Class A classification;
• an B1 flame-retardant PET felt version is also mentioned.

• Natural white oak veneer – for a genuine wood surface.
• Individual wood grain pattern – the grain of each slat may differ.
• Sound absorption – helps reduce echo and reverberation in the room.
• NRC 0.8 – declared sound absorption rating.
• MDF slat construction – for a rhythmic and modern surface design.
• PET acoustic felt – sound-absorbing backing.
• CARB P2 MDF – controlled formaldehyde emissions.
• Installation with screws or suitable adhesive – depending on the substrate construction.
• Suitable for walls and ceilings – for various interior solutions.
• One panel covers an area of 1.44 m².

• Living rooms – for TV walls or accent interior areas.
• Bedrooms – for walls behind beds and a more natural environment.
• Home offices – to reduce echo and sound reflections.
• Work offices – for natural wood and acoustic finishing.
• Meeting rooms – to improve speech intelligibility.
• Hotels – for rooms, corridors and common areas.
• Restaurants and cafés – to improve acoustic comfort.
• Reception areas – as a bright and representative wall background.
• Studios – for partial control of sound reflections.
• Educational spaces – to reduce reverberation.
• Retail spaces – as a natural and contemporary interior accent.
• Ceiling finishing – when a decorative and sound-absorbing surface is required.

For example, an acoustic slat wall covered with natural white oak veneer can be installed behind a television in a living room. The 2400 mm long panels are installed vertically, maintaining a continuous slat pattern.

The black PET felt is visible between the light natural oak slats and creates a strong contrast. The genuine wood grain gives the surface a natural and non-repeating appearance.

The acoustic backing helps absorb part of the sound travelling through the room and reflected from hard surfaces. The perception of echo may be reduced, while the wall becomes a warm and expressive interior feature.

If greater sound absorption is required, the panels can be installed on a framework with an air gap and, if necessary, an additional acoustic mineral wool layer.

For home users: suitable for living rooms, bedrooms, TV walls, home offices or other spaces where a genuine wood surface is to be combined with improved room acoustics.

For interior designers: natural white oak veneer gives each panel an individual wood grain pattern and allows light, natural vertical or horizontal slat compositions to be created.

For offices or commercial spaces: can be used in meeting rooms, offices, reception areas, hotels, restaurants, cafés and other spaces where both a natural interior appearance and reduced echo and reverberation are important.

For acoustic improvement: suitable for rooms containing many hard, sound-reflecting surfaces. The panels help absorb part of the sound energy and reduce unwanted sound reflections within the room.

For installers: the panels can be installed vertically or horizontally, cut to the required dimensions and adapted around electrical sockets, switches or other interior elements. When cutting, the natural veneer surface should be protected against chipping. Reliable mechanical fastening is recommended for ceilings.

1. Measure the wall or ceiling. Calculate the required number of panels and allow an additional margin for cutting.
2. Check the substrate. It must be dry, solid, level and free from loose finishing layers.
3. Acclimatise the panels. Before installation, keep them in the room where they will be installed.
4. Lay out the panels before fastening. Assess the natural differences in veneer colour and grain and select the most suitable arrangement.
5. Plan the slat direction. Decide whether the panels will be installed vertically or horizontally.
6. Mark the position of the first panel. Use a spirit level or laser level.
7. Cut the panel if necessary. Use a suitable fine-toothed wood-cutting tool for the MDF slats and a sharp knife for the PET felt. Protect the veneer against chipping.
8. When using adhesive, apply the mounting adhesive according to the adhesive manufacturer's instructions.
9. When using screws, fasten the panel through the PET backing. Fastening points can be positioned between the slats.
10. Check the slat direction and spacing. Adjacent panels should form a continuous composition.
11. Cut openings for sockets and switches only after accurately marking their positions.
12. Finish visible edges. If necessary, use suitable finishing profiles or other edge-finishing solutions.
13. After installation, remove dust using a soft brush or vacuum cleaner.

• Remove dust using a vacuum cleaner with a soft brush attachment.
• Clean the veneered surface with a dry, soft cloth.
• Clean the gaps between the slats with a soft brush.
• Do not use excessive amounts of water.
• Do not spray cleaning products directly onto the veneer.
• Do not use abrasive products or aggressive solvents.
• Do not allow moisture to penetrate the veneer and MDF cut edges.

• The panel is intended for dry indoor spaces.
• Do not use it in areas where direct exposure to water is possible.
• MDF and natural veneer are not intended for continuous exposure to high humidity.
• Acclimatise the panels in the installation room before installation.
• Lay out the panels before installation and match the natural wood shades.
• Check the actual panel and slat dimensions before cutting.
• Protect the natural veneer against chipping when cutting.
• Use fastening elements suitable for the substrate and panel weight.
• Mechanical fastening is recommended for ceilings.
• The suitability of adhesive-only installation on ceilings must be verified according to the technical specifications of the adhesive being used.
• Disconnect the power supply before carrying out work around electrical equipment.
• The panel is not a structural or load-bearing element.
• The NRC 0.8 result depends on the entire installation system and the covered area.

Quick Selection Guide

Choose the acoustic slat panel covered with natural white oak veneer when you need a genuine wood surface, light and natural interior finishing, and improved acoustic comfort in the room.

Natural White Oak Finish and Improved Room Acoustics

The decorative acoustic panel combines MDF slats, natural white oak veneer and a black sound-absorbing PET fibre backing. The genuine wood surface gives the interior a warm, natural and individual character.

The declared NRC 0.8 sound absorption coefficient and PET acoustic backing help reduce sound reflections, echo and reverberation within the room. The panels can be used in residential, work and commercial indoor spaces.

One 2400×600×22 mm panel covers 1.44 m² and can be installed vertically or horizontally. For improved acoustic performance, the panels can be installed on a framework with an air gap and an additional sound-absorbing layer.