Decorative Acoustic Wall | Ceiling Panel | Slatted Panel | Interior Cladding | 2400x600x22mm | MDF + PET | Natural White Oak

Decorative acoustic MDF slat panel – 2400×600×22 mm, natural oak veneer, light PET felt, NRC 0.8, bleached oak

Decorative acoustic wall and ceiling panel consisting of MDF slats covered with natural oak veneer and sound-absorbing light PET fiber felt. It is designed for interior finishing, improving room acoustics and reducing the effect of unwanted echo and sound reflections.

Natural bleached oak veneer retains the texture of real wood, grain direction and natural surface variations. The light-colored slats and light acoustic PET backing create a uniform, calm and visually light surface suitable for bright residential, working and commercial interiors.

The declared sound absorption coefficient is NRC 0.8. The actual sound absorption effect depends on the panel installation method, covered surface area, overall construction and room conditions.

• helps reduce echo in the room;
• reduces some unwanted sound reflections;
• may improve speech intelligibility;
• helps reduce the perception of reverberation;
• may contribute to a more comfortable working and resting environment;
• is suitable for residential, working and commercial indoor spaces.

The surface of the MDF slats is covered with natural oak veneer in a bleached oak finish. Veneer is a thin layer of real wood, so the natural oak grain, texture and individual characteristics of the wood remain visible on the surface.

• real natural wood surface;
• light, warm and neutral shade;
• visible natural oak texture;
• the grain pattern of each slat may vary slightly;
• matches white, grey, beige and black surfaces;
• suitable for Scandinavian, minimalist and modern interiors;
• can be combined with concrete, glass, metal and stone finishes.

The rear backing of the panel is made of light-colored compressed PET fiber felt. According to the provided color information, it is a light grey or grey-beige shade.

• absorbs part of the sound entering the panel;
• helps reduce room reverberation;
• creates a light background between the bleached oak slats;
• creates a lighter and less contrasting appearance of the panel;
• forms the base for the MDF slats;
• helps reduce the effect of sound reflected from hard surfaces.

The slats are made using MDF board with the specified emission class CARB P2.

• MDF board with controlled formaldehyde emissions;
• provides a stable base for the natural veneer;
• helps maintain a uniform slat shape;
• suitable for interior finishing products;
• suitable for use under normal dry indoor conditions.

The provided technical information states that PET acoustic felt may have different fire classifications depending on the specific material version and testing system:

• EN 13501-1:2018 classification;
• ASTM E84 Class A classification;
• an B1 flame-retardant PET felt version may also be specified.

• Natural oak veneer – for a genuine wood surface.
• Bleached oak finish – for a light and neutral interior.
• Light PET felt – for a uniform and less contrasting appearance.
• Sound absorption – helps reduce echo and reverberation in the room.
• NRC 0.8 – declared sound absorption rating.
• MDF base – for a stable slat construction.
• Natural grain pattern – each panel may vary slightly.
• Installation with screws or suitable adhesive – depending on the substrate type.
• Suitable for walls and ceilings.
• One panel covers 1.44 m².

• Living rooms – for TV walls or relaxation areas.
• Bedrooms – as a light-colored feature wall behind the bed.
• Home offices – for reducing echo and sound reflections.
• Work offices – for natural and understated finishing.
• Meeting rooms – for improving speech intelligibility.
• Hotels – for rooms and common areas.
• Restaurants and cafés – for improving acoustic comfort.
• Reception areas – as a representative natural wood background.
• Studios – for partial control of sound reflections.
• Educational spaces – for reducing reverberation.
• Retail spaces – as a light interior accent.
• Ceiling finishing – as a decorative and sound-absorbing surface.

For example, a bleached oak acoustic slat wall can be installed behind a television in a living room. The 2400 mm long panels are installed vertically, maintaining a consistent slat rhythm.

The light PET felt is visible between the light slats covered with natural oak veneer. Since the backing is not black, the entire wall finish appears lighter, calmer and less contrasting.

The PET acoustic backing helps absorb part of the sound travelling through the room and reflected from hard surfaces. The perception of echo may be reduced, while the natural wood surface becomes an expressive yet visually light interior feature.

If greater sound absorption is required, the panels can be installed on a frame, leaving an air gap and, if necessary, using an additional acoustic mineral wool layer.

For home users: suitable for living rooms, bedrooms, TV walls, home offices or other spaces where a light real wood surface is to be combined with improved room acoustics.

For interior designers: bleached oak veneer and a light PET backing allow the creation of bright, less contrasting vertical or horizontal slat compositions. Natural variations in the veneer pattern give the surface an individual character.

For offices and commercial spaces: can be used in meeting rooms, offices, reception areas, hotels, restaurants, cafés and other spaces where both a light natural interior finish and reduced echo and reverberation are important.

For acoustic improvement: suitable for rooms containing many hard sound-reflecting surfaces. The panels help absorb part of the sound energy and reduce unwanted sound reflections within the room.

For installers: the panels can be installed vertically or horizontally, cut to the required dimensions and adapted around electrical sockets, switches or other interior elements. When cutting, it is important to protect the natural veneer surface from chipping. Reliable mechanical fastening is recommended for ceilings.

1. Measure the wall or ceiling. Calculate the required number of panels and allow extra material for cutting.
2. Check the substrate. It must be dry, solid, level and free from loose finishing layers.
3. Acclimatize the panels. Before installation, keep them in the room where they will be installed.
4. Lay out the panels before fastening. Consider natural variations in veneer shade and grain and select the most suitable arrangement.
5. Plan the slat direction. Decide whether the panels will be installed vertically or horizontally.
6. Mark the position of the first panel. Use a spirit level or laser level.
7. Cut the panel if required. Use a suitable fine-tooth woodworking cutting tool for the MDF slats and a sharp knife for the PET felt. Protect the veneer from chipping.
8. When installing with adhesive, apply the mounting adhesive according to the adhesive manufacturer's instructions.
9. When installing with screws, fasten the panel through the PET backing. Fastening points can be positioned between the slats.
10. Check the slat direction and spacing. Adjacent panels should form a consistent composition.
11. Cut openings for sockets and switches only after accurately marking their positions.
12. Finish visible edges. If required, use suitable finishing profiles or other edge-finishing solutions.
13. Remove dust after installation using a soft brush or vacuum cleaner.

• Remove dust with a vacuum cleaner fitted with a soft brush attachment.
• Clean the veneered surface with a dry soft cloth.
• Clean the light PET felt carefully without rubbing the surface heavily.
• Do not use excessive amounts of water.
• Do not spray cleaning products directly onto the veneer.
• Do not use abrasive products or aggressive solvents.
• Do not allow moisture to enter the MDF and cut edges of the veneer.

• The panel is intended for dry indoor spaces.
• Do not use in areas where direct exposure to water is possible.
• MDF and natural veneer are not intended for continuous exposure to high humidity.
• Acclimatize the panels in the installation room before installation.
• Before installation, lay out the panels and coordinate the natural wood shades.
• Check the actual panel and slat dimensions before cutting.
• Protect the natural veneer from chipping when cutting.
• The light PET felt may be more susceptible to visible dirt.
• Use fasteners suitable for the substrate and panel weight.
• Mechanical fastening is recommended for ceilings.
• The suitability of adhesive-only installation on ceilings must be verified according to the technical specifications of the adhesive used.
• Disconnect the power supply before installing around electrical equipment.
• The panel is not a structural or load-bearing element.
• The NRC 0.8 result depends on the entire installation system and covered area.

Quick selection guide

Choose the bleached oak acoustic slat panel with light PET felt when you need a real wood surface, a light and less contrasting interior finish, and improved acoustic comfort in the room.

Natural bleached oak veneer and light acoustic backing

The decorative acoustic panel combines MDF slats, natural oak veneer and a light sound-absorbing PET fiber backing. The bleached oak finish and light gaps between the slats create a calm, warm and visually light surface.

The declared NRC 0.8 sound absorption coefficient and PET acoustic backing help reduce sound reflections, echo and reverberation within the room. The panels can be used in residential, working and commercial indoor spaces.

One 2400×600×22 mm panel covers 1.44 m² and can be installed vertically or horizontally. For improved acoustic performance, the panels can be installed on a frame with an air gap and an additional sound-absorbing layer.