Decorative Acoustic Wall | Ceiling Panel | Slatted Panel | Interior Cladding | 3000x600x22mm | MDF + PET | Black Oak Finish

Decorative Acoustic MDF Slat Panel – 3000×600×22 mm, PET Felt, NRC 0.8, Black Oak Finish

Decorative acoustic wall and ceiling panel consisting of wood-grain MDF slats and sound-absorbing PET fiber felt. It is designed for interior finishing, improving room acoustics and reducing the impact of unwanted echo and sound reflections.

Black Oak engineered wood veneer features a rich black or very dark grey tone with a visible longitudinal wood grain pattern. The black acoustic PET backing visually blends with the dark slats and helps create a uniform, modern and solid-looking wall or ceiling surface.

The declared sound absorption coefficient is NRC 0.8. The actual sound absorption performance depends on the panel installation method, the overall construction and room conditions.

• helps reduce echo in the room;
• reduces unwanted sound reflections;
• may improve speech intelligibility;
• helps reduce the perception of reverberation;
• suitable for residential, working, communication and leisure spaces.

The surface of the MDF slats is covered with engineered wood veneer in a Black Oak pattern. The finish features a rich black or very dark grey background with a visible longitudinal oak wood grain pattern.

• rich Black Oak shade;
• black or very dark grey wood tone;
• visible longitudinal oak grain pattern;
• modern and solid-looking surface appearance;
• matches white, grey, beige and black surfaces;
• can be combined with concrete, metal, glass and stone finishes;
• suitable for modern, industrial and minimalist interiors.

The slats are made from MDF board with the specified emission class of CARB P2.

• MDF board with controlled formaldehyde emissions;
• suitable for interior finishing products;
• uniform structure helps maintain the shape of the slats;
• surface suitable for decorative finishing;
• suitable for use under normal indoor conditions.

The black rear backing is made from compressed PET fiber. The PET felt forms the acoustic backing to which the MDF slats are attached.

• absorbs part of the sound reaching the panel;
• helps reduce reverberation in the room;
• visually blends with the Black Oak slats and creates a uniform background;
• provides the backing for the MDF slats;
• helps reduce the impact of sound reflected from hard surfaces.

The provided technical information states that acoustic PET felt, depending on the specific version and testing system, may have different fire classifications:

• EN 13501-1:2018 classification;
• ASTM E84 Class A classification;
• a B1 flame-retardant PET felt version is also mentioned.

• Sound absorption – helps reduce echo and reverberation in the room.
• NRC 0.8 – declared sound absorption rating.
• MDF slat construction – provides a rhythmic and modern surface design.
• PET acoustic felt – provides a sound-absorbing backing.
• Black Oak finish – creates a rich and solid dark wood effect.
• CARB P2 MDF – controlled formaldehyde emissions.
• Screw or suitable adhesive installation – depending on the substrate construction.
• Suitable for walls and ceilings – for various interior design solutions.
• 3000 mm length – suitable for taller walls and large-format finishing.
• One panel covers 1.80 m².

• Living rooms – for TV walls or dark accent interior zones.
• Bedrooms – for feature walls behind beds and sophisticated interior backdrops.
• Home offices – to reduce echo and sound reflections.
• Offices – for modern decorative and acoustic finishing.
• Meeting rooms – to improve speech intelligibility.
• Hotels – for rooms, corridors and common areas.
• Restaurants and cafés – to improve acoustic comfort.
• Reception areas – for a solid and representative wall backdrop.
• Studios – for partial control of sound reflections.
• Educational spaces – to reduce reverberation.
• Retail spaces – as an expressive contemporary interior accent.
• Ceiling finishing – when a decorative and sound-absorbing surface is required.

For example, a Black Oak acoustic slat wall can be installed behind a television in a room with a higher ceiling. The 3000 mm long panels are installed vertically, with their edges joined so that the slat pattern remains continuous.

The black PET felt between the dark MDF slats does not create strong contrast, so the entire surface appears uniform, deep and solid. The longitudinal oak grain remains visible and retains the appearance of natural wood texture.

The acoustic backing helps absorb part of the sound travelling through the room and sound reflected from hard surfaces. This can reduce the perception of echo while the wall becomes an expressive interior design feature.

If greater sound absorption is required, the panels can be installed on a framework with an air gap and, if necessary, an additional acoustic mineral wool layer.

For home users: suitable for living rooms, bedrooms, TV walls, home offices or other spaces where a rich dark wood finish is to be combined with improved room acoustics.

For interior designers: the 3000 mm length allows large-format vertical or horizontal slat compositions, feature walls and ceiling zones to be created, combining the Black Oak surface with the black acoustic PET backing.

For offices or commercial spaces: can be used in meeting rooms, offices, reception areas, hotels, restaurants, cafés and other spaces where both a representative interior appearance and reduced echo and reverberation are important.

For acoustic improvement: suitable for rooms containing many hard sound-reflecting surfaces. The panels help absorb part of the sound energy and reduce unwanted sound reflections within the room.

For installers: the panels can be installed vertically or horizontally, cut to the required dimensions and adapted around electrical sockets, switches and other interior elements. For walls, mechanical fastening or suitable mounting adhesive can be selected, while reliable mechanical fastening is recommended for ceilings.

1. Measure the wall or ceiling. Calculate the required number of panels and allow an additional margin for cutting.
2. Check the substrate. It must be dry, solid, level and free from loose finishing layers.
3. Plan the slat direction. Decide whether the panels will be installed vertically or horizontally.
4. Mark the position of the first panel. Use a spirit level or laser level.
5. Cut the panel if necessary. MDF slats should be cut with a tool suitable for wood, while the PET felt should be cut with a sharp knife.
6. When installing with adhesive, apply the mounting adhesive according to the adhesive manufacturer's instructions.
7. When installing with screws, fasten the panel through the PET backing. Fastening points can be positioned between the slats.
8. Check the slat direction and spacing. Adjacent panels should continue the same continuous pattern.
9. Cut openings for sockets and switches only after accurately marking their positions.
10. Finish visible edges. If necessary, use suitable finishing profiles or other edge-finishing solutions.
11. Remove dust after installation using a soft brush or vacuum cleaner.

• Remove dust using a vacuum cleaner with a soft brush attachment.
• Clean the surface with a dry, soft cloth.
• Clean the gaps between the slats with a soft brush.
• Do not use excessive amounts of water.
• Do not use abrasive sponges.
• Do not use aggressive chemical cleaners.
• Prevent moisture from reaching the cut edges of the MDF slats.

• The panel is intended for dry indoor areas.
• Do not use in areas where direct exposure to water is possible.
• MDF is not intended for continuous exposure to high humidity.
• Before installation, allow the panels to acclimatise to the room conditions.
• Check the actual panel and slat dimensions before cutting.
• Use fastening elements suitable for the substrate and panel weight.
• Mechanical fastening is recommended for ceilings.
• The suitability of adhesive-only installation on ceilings must be checked according to the technical specifications of the adhesive used.
• Disconnect the power supply before working around electrical equipment.
• The panel is not a structural or load-bearing element.
• The NRC 0.8 result depends on the complete installation system and covered area.

Quick Selection Guide

Choose the 3000 mm Black Oak acoustic slat panel when you need a rich, dark and contemporary large-format wall or ceiling finish that can also help reduce echo and unwanted sound reflections in the room.

Black Oak Finish for Taller Walls and Improved Room Acoustics

The Black Oak decorative acoustic panel combines MDF slats with a black sound-absorbing PET fiber backing. The rich black or very dark grey wood finish gives the interior a solid, expressive and contemporary character, while the 3000 mm length is particularly suitable for taller walls and continuous large-format compositions.

The declared NRC 0.8 sound absorption coefficient and PET acoustic backing help reduce sound reflections, echo and reverberation within the room. The panels can be used in residential, working and commercial indoor spaces.

One 3000×600×22 mm panel covers 1.80 m² and can be installed vertically or horizontally. For improved acoustic performance, the panels can be installed on a framework with an air gap and an additional sound-absorbing layer.