Decorative Acoustic Wall | Ceiling Panel | Slatted Panel | Interior Cladding | 3000x600x22mm | MDF + PET | Natural Black Oak

Decorative acoustic MDF slat panel – 3000×600×22 mm, natural oak veneer, black PET felt, NRC 0.8, black oak

Decorative acoustic wall and ceiling panel made of MDF slats covered with natural oak veneer and sound-absorbing black PET fibre felt. It is intended for interior finishing, improving room acoustics and reducing the effect of unwanted echo and sound reflections.

Natural veneer in a black oak shade retains the texture, grain direction and natural surface variations of real wood. The neutral black or dark graphite oak tone contrasts with the black acoustic PET backing and helps create a restrained, modern and expressive wall or ceiling surface.

The declared sound absorption coefficient is NRC 0.8. The actual sound absorption effect depends on the panel installation method, the area covered, the complete construction and the room conditions.

• helps reduce echo in the room;
• reduces some unwanted sound reflections;
• may improve speech intelligibility;
• helps reduce the perception of reverberation;
• may contribute to a more pleasant working and relaxation environment;
• suitable for residential, office and commercial indoor spaces.

The surface of the MDF slats is covered with natural oak veneer in a black oak shade. Veneer is a thin layer of real wood, therefore the surface retains the natural wood texture, grain direction, pattern variation and colour transitions.

• genuine natural wood surface;
• neutral black or dark graphite oak shade;
• visible natural longitudinal wood grain;
• lighter and darker wood tones may be visible;
• the pattern of each slat may vary slightly;
• matches black, white, grey and beige surfaces;
• suitable for modern, industrial and minimalist interiors;
• can be combined with concrete, glass, metal and stone finishes.

The rear backing of the panel is made of compressed black PET fibre felt. The PET felt forms an acoustic base to which the MDF slats are fixed and at the same time creates a contrasting background between the black oak slats.

• absorbs part of the sound entering the panel;
• helps reduce reverberation in the room;
• creates a contrasting background between black or dark graphite oak slats;
• emphasises the rhythm and geometry of the slats;
• forms the base for the MDF slats;
• helps reduce the effect of sound reflected from hard surfaces.

The slat base is made from MDF board with a stated emission class of CARB P2.

• MDF board with controlled formaldehyde emissions;
• provides a stable base for natural veneer;
• helps maintain a consistent slat shape;
• suitable for interior finishing products;
• intended for use under normal dry indoor conditions.

The provided technical data indicate that the acoustic PET felt, depending on the specific material version and test system, may have different fire classifications:

• EN 13501-1:2018 classification;
• ASTM E84 Class A classification;
• a B1 flame-retardant PET felt version may also be specified.

• Natural oak veneer – for a genuine wood surface.
• Black oak shade – for a dark, solid and contemporary interior.
• Black PET felt – for a cohesive dark panel background.
• Sound absorption – helps reduce echo and reverberation in the room.
• NRC 0.8 – declared sound absorption rating.
• MDF base – for stable slat construction.
• Visible natural wood grain – for a textured dark surface.
• Installation with screws or suitable adhesive – depending on the substrate type.
• 3000 mm length – for taller walls and large-format finishing.
• One panel covers an area of 1.80 m².

• Living rooms – for TV walls or relaxation areas.
• Bedrooms – for the wall behind the bed and a cosier atmosphere.
• Home offices – for acoustic comfort and a solid background.
• Offices – for neutral and modern finishing.
• Meeting rooms – to improve speech intelligibility.
• Hotels – for guest rooms and common areas.
• Restaurants and cafés – to improve acoustic comfort.
• Reception areas – for a representative wood background.
• Studios – for partial control of sound reflections.
• Training rooms – to reduce reverberation.
• Retail spaces – as a neutral yet expressive interior accent.
• Ceiling finishing – for a decorative and sound-absorbing surface.

For example, a black oak acoustic slat wall can be installed behind a television in a living room. The 3000 mm long panels are installed vertically while maintaining a continuous slat rhythm.

The black PET felt is visible between the black or dark graphite slats covered with natural oak veneer, creating a clear yet restrained contrast. The dark backing emphasises the geometry of the slats, while the natural wood texture gives the surface depth and individuality.

The PET acoustic backing helps absorb part of the sound travelling in the room and reflecting from hard surfaces. The perception of echo in the room may be reduced, while the wall becomes a modern interior feature.

If greater sound absorption is required, the panels can be installed on a frame with an air gap and, if necessary, an additional layer of acoustic mineral wool.

For home users: suitable for a living room, bedroom, television wall, home office or other area where a natural oak surface, a dark black oak shade and improved room acoustics are desired.

For interior designers: the 3000 mm length, natural oak veneer, black oak tone and black PET backing make it possible to create cohesive, dark large-format wall compositions. The natural grain pattern helps retain the character of real wood even with a very dark finish.

For offices or commercial spaces: suitable for meeting rooms, offices, reception areas, hotels, restaurants, cafés and other spaces where both representative dark natural-wood finishing and reduction of echo and reverberation are important.

For improving acoustics: suitable for rooms with many hard, sound-reflecting surfaces. The panels help absorb part of the sound energy and reduce unwanted sound reflections within the room.

For installers: the panels can be installed vertically or horizontally, shortened to suit the required room height and adapted around electrical sockets, switches or other interior elements. When cutting, it is important to protect the natural veneer surface from chipping. Reliable mechanical fixing is recommended for ceiling installation.

1. Measure the wall or ceiling. Calculate the required number of panels and allow for cutting waste.
2. Check the substrate. It must be dry, solid, level and free from loose finishing layers.
3. Acclimatise the panels. Before installation, keep them in the room where they will be installed.
4. Lay out the panels before fixing. Assess the natural differences in veneer shade and grain and choose the most suitable arrangement.
5. Plan the slat direction. Decide whether the panels will be installed vertically or horizontally.
6. Mark the position of the first panel. Use a spirit level or laser level.
7. Cut the panel if necessary. Use a suitable fine-tooth wood-cutting tool for the MDF slats and a sharp knife for the PET felt. Protect the veneer from chipping.
8. When installing with adhesive, apply the installation adhesive according to the adhesive manufacturer's instructions.
9. When installing with screws, screw the panel through the PET backing. Fixing points can be selected between the slats.
10. Check the slat direction and spacing. Adjacent panels should form a continuous composition.
11. Cut openings for sockets and switches only after accurately marking their positions.
12. Finish visible edges. If necessary, use suitable finishing profiles or other edge-finishing solutions.
13. After installation, remove dust with a soft brush or vacuum cleaner.

• Remove dust with a vacuum cleaner fitted with a soft brush attachment.
• Clean the veneered surface with a dry soft cloth.
• Clean the gaps between the slats with a soft brush.
• Do not use excessive amounts of water.
• Do not spray cleaning products directly onto the veneer.
• Do not use abrasive products or aggressive solvents.
• Do not allow moisture to enter the cut edges of the MDF and veneer.

• The panel is intended for dry indoor spaces.
• Do not use where it may be exposed directly to water.
• MDF and natural veneer are not intended for continuously high humidity.
• The grain pattern and texture of natural veneer may vary.
• Dust and fingerprints may be more noticeable on dark surfaces.
• Lay out the panels before installation and coordinate their texture.
• Check the actual panel and slat dimensions before cutting.
• Protect the natural veneer from chipping when cutting.
• The colour name “black oak” does not itself confirm a specific painting or staining method.
• Use fixings suitable for the substrate and panel weight.
• Mechanical fixing is recommended for ceilings.
• The suitability of adhesive alone for ceiling installation must be checked against the technical conditions of the adhesive used.
• Disconnect the power supply before installing around electrical equipment.
• The panel is not a structural or load-bearing element.
• The NRC 0.8 result depends on the complete installation system and covered area.

Quick selection guide

Choose the 3000×600 mm black oak acoustic slat panel with natural oak veneer and black PET felt when you need a genuine wood surface, a dark modern interior feature, strong contrast between the slats and improved acoustic comfort in the room.

Natural black oak veneer for taller walls with a cohesive black acoustic backing

The decorative acoustic panel combines MDF slats, natural oak veneer and a black sound-absorbing PET fibre backing. The neutral black or dark graphite oak shade gives the interior a restrained and contemporary character, while the black gaps between the slats emphasise their geometry and rhythm. The 3000 mm length is particularly suitable for taller walls and continuous large-format compositions.

The declared NRC 0.8 sound absorption coefficient and PET acoustic backing help reduce sound reflections, echo and reverberation generated within the room. The panels can be used in residential, office and commercial indoor spaces.

One 3000×600×22 mm panel covers 1.80 m² and can be installed vertically or horizontally. For improved acoustic performance, the panels can be installed on a frame with an air gap and an additional sound-absorbing layer.