Decorative Acoustic Wall | Ceiling Panel | Slatted Panel | Interior Cladding | 3000x600x22mm | MDF + PET | Natural Grey Oak

Decorative acoustic MDF slat panel – 3000×600×22 mm, natural oak veneer, black PET felt, NRC 0.8, grey oak

Decorative acoustic wall and ceiling panel made of MDF slats covered with natural oak veneer and sound-absorbing black PET fibre felt. It is intended for interior finishing, improving room acoustics and reducing the effect of unwanted echo and sound reflections.

Natural veneer in a grey oak shade retains the texture, grain direction and natural surface variations of real wood. The neutral grey or grey-brown oak tone contrasts with the black acoustic PET backing and helps create a restrained, modern and expressive wall or ceiling surface.

The declared sound absorption coefficient is NRC 0.8. The actual sound absorption effect depends on the panel installation method, the area covered, the complete construction and the room conditions.

• helps reduce echo in the room;
• reduces some unwanted sound reflections;
• may improve speech intelligibility;
• helps reduce the perception of reverberation;
• may contribute to a more pleasant working and relaxation environment;
• suitable for residential, office and commercial indoor spaces.

The surface of the MDF slats is covered with natural oak veneer in a grey oak shade. Veneer is a thin layer of real wood, therefore the surface retains the natural wood texture, grain direction, pattern variation and colour transitions.

• genuine natural wood surface;
• neutral grey or grey-brown oak shade;
• visible natural longitudinal wood grain;
• lighter and darker wood tones may be visible;
• the pattern of each slat may vary slightly;
• matches black, white, grey and beige surfaces;
• suitable for modern, industrial and minimalist interiors;
• can be combined with concrete, glass, metal and stone finishes.

The rear backing of the panel is made of compressed black PET fibre felt. The PET felt forms an acoustic base to which the MDF slats are fixed and at the same time creates a contrasting background between the grey oak slats.

• absorbs part of the sound entering the panel;
• helps reduce reverberation in the room;
• creates a contrasting background between grey or grey-brown oak slats;
• emphasises the rhythm and geometry of the slats;
• forms the base for the MDF slats;
• helps reduce the effect of sound reflected from hard surfaces.

The slat base is made from MDF board with a stated emission class of CARB P2.

• MDF board with controlled formaldehyde emissions;
• provides a stable base for natural veneer;
• helps maintain a consistent slat shape;
• suitable for interior finishing products;
• intended for use under normal dry indoor conditions.

The provided technical data indicate that the acoustic PET felt, depending on the specific material version and test system, may have different fire classifications:

• EN 13501-1:2018 classification;
• ASTM E84 Class A classification;
• a B1 flame-retardant PET felt version may also be specified.

• Natural oak veneer – for a genuine wood surface.
• Grey oak shade – for a neutral and contemporary interior.
• Black PET felt – for a strong contrast between the slats.
• Sound absorption – helps reduce echo and reverberation in the room.
• NRC 0.8 – declared sound absorption rating.
• MDF base – for a stable slat construction.
• Natural grain pattern – each panel may vary slightly.
• Installation with screws or suitable adhesive – depending on the substrate type.
• 3000 mm length – for taller walls and large-format finishes.
• One panel covers 1.80 m².

• Living rooms – for TV walls or relaxation areas.
• Bedrooms – for the wall behind the bed and a restrained interior.
• Home offices – to reduce echo and sound reflections.
• Offices – for neutral and modern finishing.
• Meeting rooms – to improve speech intelligibility.
• Hotels – for guest rooms and common areas.
• Restaurants and cafés – to improve acoustic comfort.
• Reception areas – for a representative wood background.
• Studios – for partial control of sound reflections.
• Training rooms – to reduce reverberation.
• Retail spaces – as a neutral yet expressive interior accent.
• Ceiling finishing – for a decorative and sound-absorbing surface.

For example, a grey oak acoustic slat wall can be installed behind a television in a taller living room. The 3000 mm long panels are installed vertically while maintaining a continuous slat rhythm.

The black PET felt is visible between the grey or grey-brown slats covered with natural oak veneer, creating a clear yet restrained contrast. The dark backing emphasises the geometry of the slats, while the natural wood texture gives the surface depth and individuality.

The PET acoustic backing helps absorb part of the sound travelling in the room and reflecting from hard surfaces. The perception of echo in the room may be reduced, while the wall becomes a modern interior feature.

If greater sound absorption is required, the panels can be installed on a frame with an air gap and, if necessary, an additional layer of acoustic mineral wool.

For home users: suitable for living rooms, bedrooms, TV walls, home offices or other spaces where a genuine oak surface, a neutral grey or grey-brown shade and improved room acoustics are desired.

For interior designers: the 3000 mm length, natural oak veneer, grey oak tone and black PET backing make it possible to create continuous large-format wall compositions. Natural variations in veneer pattern and colour give the surface an individual character.

For offices or commercial spaces: can be used in meeting rooms, offices, reception areas, hotels, restaurants, cafés and other spaces where both a representative natural wood finish and the reduction of echo and reverberation are important.

For improving acoustics: suitable for rooms with many hard, sound-reflecting surfaces. The panels help absorb part of the sound energy and reduce unwanted sound reflections within the room.

For installers: the panels can be installed vertically or horizontally, shortened to the required room height and adapted around electrical sockets, switches or other interior elements. When cutting, it is important to protect the natural veneer surface from chipping. Reliable mechanical fixing is recommended for ceiling installation.

1. Measure the wall or ceiling. Calculate the required number of panels and allow for cutting waste.
2. Check the substrate. It must be dry, solid, level and free from loose finishing layers.
3. Acclimatise the panels. Before installation, keep them in the room where they will be installed.
4. Lay out the panels before fixing. Assess the natural differences in veneer shade and grain and choose the most suitable arrangement.
5. Plan the slat direction. Decide whether the panels will be installed vertically or horizontally.
6. Mark the position of the first panel. Use a spirit level or laser level.
7. Cut the panel if necessary. Use a suitable fine-tooth wood-cutting tool for the MDF slats and a sharp knife for the PET felt. Protect the veneer from chipping.
8. When installing with adhesive, apply the installation adhesive according to the adhesive manufacturer's instructions.
9. When installing with screws, screw the panel through the PET backing. Fixing points can be selected between the slats.
10. Check the slat direction and spacing. Adjacent panels should form a continuous composition.
11. Cut openings for sockets and switches only after accurately marking their positions.
12. Finish visible edges. If necessary, use suitable finishing profiles or other edge-finishing solutions.
13. After installation, remove dust with a soft brush or vacuum cleaner.

• Remove dust with a vacuum cleaner fitted with a soft brush attachment.
• Clean the veneered surface with a dry soft cloth.
• Clean the gaps between the slats with a soft brush.
• Do not use excessive amounts of water.
• Do not spray cleaning products directly onto the veneer.
• Do not use abrasive products or aggressive solvents.
• Do not allow moisture to enter the cut edges of the MDF and veneer.

• The panel is intended for dry indoor areas.
• Do not use where direct exposure to water is possible.
• MDF and natural veneer are not intended for continuous high-humidity conditions.
• Acclimatise the panels in the installation room before fitting.
• Lay out the panels before installation and match the natural wood shades.
• Check the actual panel and slat dimensions before cutting.
• Protect the natural veneer from chipping when cutting.
• The colour name „grey oak“ does not by itself confirm any specific painting, staining or other surface treatment method.
• Use fasteners suitable for the substrate and panel weight.
• Mechanical fixing is recommended for ceilings.
• The suitability of adhesive-only ceiling installation must be checked according to the technical specifications of the adhesive used.
• Disconnect the power supply before installing around electrical equipment.
• The panel is not a structural or load-bearing element.
• The NRC 0.8 result depends on the complete installation system and the area covered.

Quick selection guide

Choose the 3000×600 mm grey oak acoustic slat panel with natural oak veneer and black PET felt when you need a genuine wood surface, a neutral modern interior feature, a solution for taller walls or large-format finishing, and improved acoustic comfort in the room.

Natural grey oak veneer for taller walls with an expressive black acoustic backing

The decorative acoustic panel combines MDF slats, natural oak veneer and a black sound-absorbing PET fibre backing. The neutral grey or grey-brown oak shade gives the interior a restrained and contemporary character, while the black gaps between the slats emphasise their geometry and rhythm. The 3000 mm length is particularly suitable for taller walls and continuous large-format compositions.

The declared NRC 0.8 sound absorption coefficient and PET acoustic backing help reduce sound reflections, echo and reverberation generated within the room. The panels can be used in residential, office and commercial indoor spaces.

One 3000×600×22 mm panel covers 1.80 m² and can be installed vertically or horizontally. For improved acoustic performance, the panels can be installed on a frame with an air gap and an additional sound-absorbing layer.