Decorative Acoustic Wall | Ceiling Panel | Slatted Panel | Interior Cladding | 3000x600x22mm | MDF + PET | Natural Smoked Oak

Decorative Acoustic MDF Slat Panel – 3000×600×22 mm, Natural Oak Veneer, Black PET Felt, NRC 0.8, Smoked Oak

Decorative acoustic wall and ceiling panel made of MDF slats covered with natural oak veneer and sound-absorbing black PET fibre felt. It is designed for interior finishing, improving room acoustics and reducing the effect of unwanted echo and sound reflections.

Natural smoked oak veneer retains the texture of real wood, grain direction and natural surface variations. The muted grey-brown oak tone contrasts with the black acoustic PET backing and helps create a restrained, solid and expressive wall or ceiling surface.

The declared sound absorption coefficient is NRC 0.8. The actual sound absorption performance depends on the panel installation method, covered surface area, complete construction and room conditions.

• helps reduce echo in the room;
• reduces some unwanted sound reflections;
• may improve speech intelligibility;
• helps reduce the perception of reverberation;
• may contribute to a more comfortable working and relaxation environment;
• is suitable for residential, working and commercial indoor spaces.

The surface of the MDF slats is covered with natural oak veneer in a smoked oak shade. Veneer is a thin layer of real wood, therefore the surface retains the natural wood texture, grain direction, pattern variation and colour transitions.

• real natural wood surface;
• muted grey-brown oak tone;
• visible natural longitudinal wood grain;
• lighter and darker wood tones may be visible;
• the grain pattern of each slat may vary slightly;
• matches black, white, grey and beige surfaces;
• suitable for modern, industrial and minimalist interiors;
• can be combined with concrete, glass, metal and stone finishes.

The rear backing of the panel is made of black compressed PET fibre felt. The PET felt forms the acoustic backing to which the MDF slats are attached and also creates a contrasting background between the smoked oak-coloured slats.

• absorbs part of the sound reaching the panel;
• helps reduce reverberation in the room;
• creates a contrasting background between the grey-brown oak slats;
• emphasises the rhythm and geometry of the slats;
• forms the base for the MDF slats;
• helps reduce the effect of sound reflected from hard surfaces.

The slats are made using MDF board with a specified emission class of CARB P2.

• MDF board with controlled formaldehyde emissions;
• provides a stable base for the natural veneer;
• helps maintain consistent slat shape;
• suitable for interior finishing products;
• intended for normal dry indoor conditions.

The provided technical data states that acoustic PET felt may have different fire classifications depending on the specific material version and testing system:

• EN 13501-1:2018 classification;
• ASTM E84 Class A classification;
• an additional B1 flame-retardant PET felt version may also be available.

• Natural oak veneer – creates a real wood surface.
• Smoked oak shade – suitable for restrained and richer interiors.
• Black PET felt – provides strong contrast between the slats.
• Sound absorption – helps reduce echo and reverberation in the room.
• NRC 0.8 – declared sound absorption rating.
• MDF base – provides a stable slat construction.
• Natural wood grain – each panel may vary slightly.
• Installation with screws or suitable adhesive – depending on the substrate.
• 3000 mm length – suitable for higher walls and large-format finishing.
• One panel covers 1.80 m².

• Living rooms – for TV walls or relaxation areas.
• Bedrooms – behind the bed and for restrained interior design.
• Home offices – to reduce echo and sound reflections.
• Offices – for natural and solid-looking interior finishing.
• Meeting rooms – to improve speech intelligibility.
• Hotels – for rooms and common areas.
• Restaurants and cafés – to improve acoustic comfort.
• Reception areas – as a representative natural wood backdrop.
• Studios – for partial control of sound reflections.
• Training rooms – to reduce reverberation.
• Retail spaces – as a restrained and expressive interior accent.
• Ceilings – as a decorative and sound-absorbing surface.

For example, an acoustic slat wall in a smoked oak shade can be installed behind a television in a room with a higher ceiling. The 3000 mm long panels are installed vertically, maintaining a continuous slat rhythm.

The black PET felt is visible between the grey-brown slats covered with natural oak veneer, creating a strong yet restrained contrast. The dark background emphasises the geometry of the slats, while the natural wood texture gives the surface depth and individuality.

The PET acoustic backing helps absorb part of the sound travelling through the room and reflected from hard surfaces. The perception of echo may therefore be reduced, while the wall also becomes a decorative interior feature.

If greater sound absorption is required, the panels can be installed on a framework with an air gap and, if necessary, an additional acoustic mineral wool layer.

For home users: suitable for living rooms, bedrooms, TV walls, home offices or other spaces where a real oak surface, muted grey-brown tone and improved room acoustics are desired.

For interior designers: the 3000 mm length, natural oak veneer, smoked oak tone and black PET backing allow large-format, continuous wall compositions to be created. Natural variations in veneer grain and colour give the surface an individual character.

For offices and commercial spaces: it can be used in meeting rooms, offices, reception areas, hotels, restaurants, cafés and other spaces where both representative natural wood finishing and reduced echo and reverberation are important.

For acoustic improvement: suitable for rooms containing many hard sound-reflecting surfaces. The panels help absorb part of the sound energy and reduce unwanted sound reflections within the room.

For installers: the panels can be installed vertically or horizontally, shortened according to the required room height and adapted around electrical sockets, switches and other interior elements. When cutting, protect the natural veneer surface against chipping. Reliable mechanical fixing is recommended for ceiling installation.

1. Measure the wall or ceiling. Calculate the required number of panels and allow extra material for cutting.
2. Check the substrate. It must be dry, solid, level and free from loose finishing layers.
3. Acclimatise the panels. Keep them in the room where they will be installed before installation.
4. Lay out the panels before fixing them. Consider natural variations in veneer colour and grain and select the most suitable arrangement.
5. Plan the slat direction. Decide whether the panels will be installed vertically or horizontally.
6. Mark the position of the first panel. Use a spirit level or laser level.
7. Cut the panel if necessary. Use a suitable fine-toothed woodworking tool for the MDF slats and a sharp knife for the PET felt. Protect the veneer against chipping.
8. For adhesive installation, apply the mounting adhesive according to the adhesive manufacturer's instructions.
9. For screw installation, fix the panel through the PET backing. Fixing points can be positioned between the slats.
10. Check the slat direction and spacing. Adjacent panels should form a continuous composition.
11. Cut openings for sockets and switches only after their exact positions have been marked.
12. Finish visible edges. If necessary, use suitable finishing profiles or other edge-finishing solutions.
13. Remove dust after installation using a soft brush or vacuum cleaner.

• Remove dust with a vacuum cleaner equipped with a soft brush attachment.
• Clean the veneered surface with a dry, soft cloth.
• Clean the gaps between the slats with a soft brush.
• Do not use excessive water.
• Do not spray cleaning products directly onto the veneer.
• Do not use abrasive products or aggressive solvents.
• Do not allow moisture to enter the cut edges of the MDF and veneer.

• The panel is intended for dry indoor spaces.
• Do not use in areas exposed to direct water.
• MDF and natural veneer are not intended for continuous exposure to high humidity.
• Acclimatise the panels in the installation room before installation.
• Arrange the panels before installation to coordinate the natural wood tones.
• Check the actual panel and slat dimensions before cutting.
• Protect the natural veneer against chipping when cutting.
• The colour name “smoked oak” does not by itself confirm an actual wood-smoking process.
• Use fixing elements suitable for the substrate and panel weight.
• Mechanical fixing is recommended for ceilings.
• The suitability of adhesive-only installation on ceilings must be verified according to the technical specifications of the adhesive used.
• Disconnect the power supply before working around electrical equipment.
• The panel is not a structural or load-bearing element.
• The NRC 0.8 result depends on the complete installation system and covered area.

Quick Selection Guide

Choose the 3000 mm smoked oak acoustic slat panel with natural oak veneer and black PET felt when you need a real wood surface, a restrained grey-brown interior accent, large-format finishing and improved acoustic comfort within the room.

Natural Smoked Oak Veneer for Higher Walls and an Expressive Black Acoustic Backing

The decorative acoustic panel combines MDF slats, natural oak veneer and a black sound-absorbing PET fibre backing. The muted grey-brown smoked oak shade gives the interior a restrained and solid character, while the black gaps between the slats emphasise their geometry and rhythm. The 3000 mm length is particularly suitable for higher walls and continuous large-format compositions.

The declared NRC 0.8 sound absorption coefficient and PET acoustic backing help reduce sound reflections, echo and reverberation within the room. The panels can be used in residential, working and commercial indoor spaces.

One 3000×600×22 mm panel covers 1.80 m² and can be installed vertically or horizontally. For improved acoustic performance, the panels can be installed on a framework with an air gap and an additional sound-absorbing layer.