Decorative Acoustic Wall | Ceiling Panel | Slatted Panel | Interior Cladding | 3000x600x22mm | MDF + PET | Natural White Ash

Decorative Acoustic MDF Slat Panel – 3000×600×22 mm, Natural Ash Veneer, Black PET Felt, NRC 0.8, Light / Bleached Ash

Decorative acoustic wall and ceiling panel made of MDF slats covered with natural ash veneer and sound-absorbing black PET fibre felt. It is designed for interior finishing, improving room acoustics and reducing the effect of unwanted echo and sound reflections.

Light / bleached ash natural veneer retains the texture, grain direction and natural variations of real wood. The light-coloured slats contrast with the black acoustic PET backing, creating an expressive, modern and rhythmic wall or ceiling surface.

The declared sound absorption coefficient is NRC 0.8. The actual sound absorption effect depends on the panel installation method, covered surface area, complete construction and room conditions.

• helps reduce echo in the room;
• reduces some unwanted sound reflections;
• may improve speech intelligibility;
• helps reduce the perception of reverberation;
• may contribute to a more comfortable working and living environment;
• suitable for residential, workplace and commercial interior spaces.

The MDF slat surface is covered with natural ash veneer in a light or bleached ash shade. Veneer is a thin layer of real wood, so the natural wood grain, texture and individual characteristics remain visible on the surface.

• real natural wood surface;
• light, warm and neutral shade;
• visible natural ash texture and longitudinal grain pattern;
• the grain pattern of each slat may vary slightly;
• matches white, grey, beige and black surfaces;
• suitable for Scandinavian, minimalist and modern interiors;
• can be combined with concrete, glass, metal and stone finishes.

The rear backing of the panel is made of black compressed PET fibre felt. The PET felt forms the acoustic backing to which the MDF slats are attached and creates a clear contrast with the light ash slats.

• absorbs part of the sound reaching the panel;
• helps reduce room reverberation;
• creates a strong background between the light ash slats;
• emphasises the rhythm and geometry of the slats;
• forms the backing for the MDF slats;
• helps reduce the effect of sound reflected from hard surfaces.

The slats are made using MDF board with the specified emission class CARB P2.

• MDF board with controlled formaldehyde emissions;
• provides a stable base for the natural veneer;
• helps maintain a consistent slat shape;
• suitable for interior finishing products;
• intended for normal dry indoor conditions.

The provided technical information states that acoustic PET felt may have different fire classifications depending on the specific material version and testing system:

• EN 13501-1:2018 classification;
• ASTM E84 Class A classification;
• an B1 flame-retardant PET felt version may also be available.

• Natural ash veneer – provides a genuine wood surface.
• Light / bleached ash colour – suitable for bright and natural interiors.
• Black PET felt – creates a strong contrast between the slats.
• Sound absorption – helps reduce echo and reverberation.
• NRC 0.8 – declared sound absorption rating.
• MDF backing – provides a stable slat construction.
• Natural wood grain – each panel may vary slightly.
• Installation with screws or suitable adhesive – depending on the substrate.
• 3000 mm length – suitable for higher walls and large-format finishing.
• One panel covers 1.80 m².

• Living rooms – for TV walls or relaxation areas.
• Bedrooms – for light and natural wall finishing.
• Home offices – to reduce echo and sound reflections.
• Work offices – for natural wood and acoustic finishing.
• Meeting rooms – to improve speech intelligibility.
• Hotels – for rooms and common areas.
• Restaurants and cafés – to improve acoustic comfort.
• Reception areas – as a representative natural wood background.
• Studios – for partial control of sound reflections.
• Educational spaces – to reduce reverberation.
• Retail spaces – as a modern interior design feature.
• Ceiling finishing – as a decorative and sound-absorbing surface.

For example, an acoustic slat wall in a light ash finish can be installed behind a television in a higher-ceiling living room. The 3000 mm long panels can be installed vertically while maintaining a continuous slat rhythm.

The black PET felt is visible between the light natural ash veneer-covered slats and creates a strong contrast. The dark background emphasises the geometry of the slats, while the natural wood texture adds warmth and individuality to the surface.

The PET acoustic backing helps absorb part of the sound travelling through the room and reflected from hard surfaces. The perception of echo can be reduced, while the wall becomes an expressive interior design feature.

If greater sound absorption is required, the panels can be installed on a frame with an air gap and, if necessary, an additional layer of acoustic mineral wool.

For home users: suitable for living rooms, bedrooms, TV walls, home offices or other spaces where a light genuine wood surface, strong contrast between the black gaps and the slats, and improved room acoustics are desired.

For interior designers: the 3000 mm length, natural ash veneer and black PET backing allow continuous large-format wall compositions to be created. Natural variations in the veneer grain give the surface an individual appearance, while the black background emphasises the slat rhythm.

For offices and commercial spaces: suitable for meeting rooms, offices, reception areas, hotels, restaurants, cafés and other spaces where both natural interior appearance and reduced echo and reverberation are important.

For acoustic improvement: suitable for rooms with many hard, sound-reflecting surfaces. The panels help absorb part of the sound energy and reduce unwanted sound reflections within the room.

For installers: the panels can be installed vertically or horizontally, shortened to the required room height and adapted around electrical sockets, switches and other interior elements. When cutting, the natural veneer surface should be protected against chipping. Reliable mechanical fixing is recommended for ceilings.

1. Measure the wall or ceiling. Calculate the required number of panels and allow additional material for cutting.
2. Check the substrate. It must be dry, solid, level and free of loose finishing layers.
3. Acclimatise the panels. Before installation, keep them in the room where they will be installed.
4. Lay out the panels before fixing. Consider natural variations in veneer shade and grain and select the most suitable arrangement.
5. Plan the slat direction. Decide whether the panels will be installed vertically or horizontally.
6. Mark the position of the first panel. Use a spirit level or laser level.
7. Cut the panel if required. Use a suitable fine-toothed woodworking tool for MDF slats and a sharp knife for PET felt. Protect the veneer from chipping.
8. For adhesive installation, apply the mounting adhesive according to the adhesive manufacturer's instructions.
9. For screw installation, fix the panel through the PET backing. Fixing points can be positioned between the slats.
10. Check the slat direction and spacing. Adjacent panels should form a continuous composition.
11. Cut openings for sockets and switches only after accurately marking their positions.
12. Finish visible edges. If necessary, use suitable finishing profiles or other edge-finishing solutions.
13. Remove dust after installation using a soft brush or vacuum cleaner.

• Remove dust using a vacuum cleaner with a soft brush attachment.
• Clean the veneered surface with a dry, soft cloth.
• Clean the gaps between the slats with a soft brush.
• Do not use excessive water.
• Do not spray cleaning products directly onto the veneer.
• Do not use abrasive products or aggressive solvents.
• Do not allow moisture to enter MDF or the cut edges of the veneer.

• The panel is intended for dry indoor spaces.
• Do not use in areas exposed to direct water.
• MDF and natural veneer are not intended for continuous exposure to high humidity.
• Acclimatise the panels in the installation room before installation.
• Lay out the panels before installation and match the natural wood shades.
• Check the actual panel and slat dimensions before cutting.
• Protect the natural veneer from chipping during cutting.
• Use fixing elements suitable for the substrate and panel weight.
• Mechanical fixing is recommended for ceilings.
• Suitability of adhesive-only ceiling installation must be verified according to the technical conditions of the adhesive used.
• Disconnect the power supply before installing around electrical equipment.
• The panel is not a structural or load-bearing element.
• The NRC 0.8 result depends on the complete installation system and covered area.

Quick selection guide

Choose the 3000 mm light / bleached ash acoustic slat panel with black PET felt when you need a genuine wood surface, a strong contrast between the light slats and black backing, large-format finishing and improved acoustic comfort in the room.

Natural light ash veneer for higher walls and distinctive black acoustic backing

The decorative acoustic panel combines MDF slats, natural ash veneer and a black sound-absorbing PET fibre backing. The light or bleached ash shade gives the interior a natural appearance, while the black gaps between the slats emphasise their geometry and rhythm. The 3000 mm length is particularly suitable for higher walls and continuous large-format compositions.

The declared NRC 0.8 sound absorption coefficient and PET acoustic backing help reduce sound reflections, echo and reverberation within the room. The panels can be used in residential, workplace and commercial interior spaces.

One 3000×600×22 mm panel covers 1.80 m² and can be installed vertically or horizontally. For improved acoustic performance, the panels can be installed on a frame with an air gap and an additional sound-absorbing layer.