Decorative Acoustic Wall | Ceiling Panel | Slatted Panel | Interior Cladding | 3000x600x22mm | MDF + PET | Natural White Oak

Decorative Acoustic MDF Slat Panel – 3000×600×22 mm, Natural White Oak Veneer, PET Felt, NRC 0.8

Decorative acoustic wall and ceiling panel consisting of MDF slats covered with natural white oak veneer and sound-absorbing PET fiber felt. It is designed for interior finishing, improving room acoustics and reducing the impact of unwanted echo and sound reflections.

Natural white oak veneer retains the texture of real wood, natural grain pattern and natural variations in shade. The light wood surface contrasts with the black acoustic PET backing, helping to create a modern, warm and rhythmic wall or ceiling surface.

The declared sound absorption coefficient is NRC 0.8. The actual sound absorption performance depends on the panel installation method, the complete construction and the conditions of the room.

• helps reduce echo in the room;
• reduces unwanted sound reflections;
• may improve speech intelligibility;
• helps reduce the perception of reverberation;
• suitable for residential, working, social and leisure spaces.

The MDF slat surface is covered with natural white oak veneer. This is a thin layer of real wood, so the surface retains the natural oak texture, grain direction and characteristic variation in wood colour.

• genuine natural wood surface;
• light white oak shade;
• naturally visible wood grain;
• each slat may have an individual grain pattern;
• warm and natural surface appearance;
• matches white, black, grey and beige surfaces;
• suitable for Scandinavian, modern and minimalist interiors;
• can be combined with concrete, glass, metal and natural stone.

The slats are made using MDF board with the stated emission class CARB P2.

• MDF board with controlled formaldehyde emissions;
• suitable for interior finishing products;
• uniform structure helps maintain the shape of the slats;
• provides a stable base for natural wood veneer;
• intended for use under normal dry indoor conditions.

The black rear backing is made of compressed PET fibers. The PET felt forms the acoustic backing to which the MDF slats are attached.

• absorbs part of the sound reaching the panel;
• helps reduce room reverberation;
• creates a contrasting background between the light oak slats;
• provides a base for the MDF slats;
• helps reduce the impact of sound reflected from hard surfaces.

The provided technical information states that the acoustic PET felt may have different fire classifications depending on the specific version and testing system:

• EN 13501-1:2018 classification;
• ASTM E84 Class A classification;
• an B1 flame-retardant PET felt version is also mentioned.

• Natural white oak veneer – for a genuine wood surface.
• Individual wood grain pattern – the grain of each slat may vary.
• Sound absorption – helps reduce echo and reverberation in the room.
• NRC 0.8 – declared sound absorption rating.
• MDF slat construction – for a rhythmic and modern surface design.
• PET acoustic felt – sound-absorbing backing.
• CARB P2 MDF – controlled formaldehyde emissions.
• Installation with screws or suitable adhesive – depending on the substrate construction.
• Suitable for walls and ceilings – for various interior solutions.
• 3000 mm length – suitable for higher walls and large-format finishing.
• One panel covers 1.80 m².

• Living rooms – for TV walls or accent interior areas.
• Bedrooms – for walls behind beds and a more natural interior environment.
• Home offices – to reduce echo and sound reflections.
• Offices – for natural wood and acoustic finishing.
• Meeting rooms – to improve speech intelligibility.
• Hotels – for rooms, corridors and common areas.
• Restaurants and cafés – to improve acoustic comfort.
• Reception areas – for a bright and representative wall background.
• Studios – for partial control of sound reflections.
• Educational spaces – to reduce reverberation.
• Retail spaces – as a natural and contemporary interior accent.
• Ceiling finishing – when a decorative and sound-absorbing surface is required.

For example, in a higher living room, an acoustic slat wall with natural white oak veneer can be installed behind the TV. The 3000 mm long panels can be installed vertically, maintaining a continuous slat rhythm.

The black PET felt is visible between the light natural oak slats, creating a strong contrast. The genuine wood grain gives the surface a natural and unique appearance.

The acoustic backing helps absorb part of the sound travelling through the room and sound reflected from hard surfaces. The perception of echo may be reduced, while the wall becomes a warm and expressive interior feature.

If greater sound absorption is required, the panels can be installed on a framework with an air gap and, if necessary, an additional acoustic mineral wool layer.

For home users: suitable for living rooms, bedrooms, TV walls, home offices or other spaces where a genuine wood surface is to be combined with improved room acoustics.

For interior designers: the 3000 mm length and natural white oak veneer allow seamless large-format wall compositions while maintaining the individual grain pattern of real wood and a light, natural surface.

For offices and commercial spaces: can be used in meeting rooms, offices, reception areas, hotels, restaurants, cafés and other spaces where both a natural interior appearance and reduced echo and reverberation are important.

For acoustic improvement: suitable for rooms containing many hard, sound-reflecting surfaces. The panels help absorb part of the sound energy and reduce unwanted sound reflections within the room.

For installers: the panels can be installed vertically or horizontally, cut to the required dimensions and adapted around electrical sockets, switches and other interior elements. When cutting, the natural veneer surface should be protected against chipping. Reliable mechanical fastening is recommended for ceilings.

1. Measure the wall or ceiling. Calculate the required number of panels and allow for cutting waste.
2. Check the substrate. It must be dry, solid, level and free from loose finishing layers.
3. Acclimatise the panels. Before installation, keep them in the room where they will be installed.
4. Lay out the panels before fastening. Assess natural veneer shade and grain variations and select the most suitable arrangement.
5. Plan the slat direction. Decide whether the panels will be installed vertically or horizontally.
6. Mark the position of the first panel. Use a spirit level or laser level.
7. Cut the panel if required. Use a suitable fine-toothed wood-cutting tool for the MDF slats and a sharp knife for the PET felt. Protect the veneer against chipping.
8. When using adhesive, apply the mounting adhesive according to the adhesive manufacturer's instructions.
9. When using screws, fasten the panel through the PET backing. Fastening points can be positioned between the slats.
10. Check the slat direction and spacing. Adjacent panels should form a continuous composition.
11. Cut openings for sockets and switches only after accurately marking their positions.
12. Finish visible edges. If required, use suitable finishing profiles or other edge-finishing solutions.
13. Remove dust after installation using a soft brush or vacuum cleaner.

• Remove dust using a vacuum cleaner with a soft brush attachment.
• Clean the veneered surface with a dry, soft cloth.
• Clean the gaps between the slats with a soft brush.
• Do not use excessive water.
• Do not spray cleaning products directly onto the veneer.
• Do not use abrasive products or aggressive solvents.
• Do not allow moisture to enter the cut edges of the veneer and MDF.

• The panel is intended for dry indoor spaces.
• Do not use in locations exposed to direct water.
• MDF and natural veneer are not intended for continuous exposure to high humidity.
• Acclimatise the panels in the installation room before installation.
• Arrange the panels before installation to coordinate the natural wood shades.
• Check the actual panel and slat dimensions before cutting.
• Protect the natural veneer against chipping during cutting.
• Use fastening elements suitable for the substrate and panel weight.
• Mechanical fastening is recommended for ceilings.
• The suitability of adhesive-only installation on ceilings must be checked according to the technical specifications of the adhesive used.
• Disconnect the power supply before working around electrical equipment.
• The panel is not a structural or load-bearing element.
• The NRC 0.8 result depends on the complete installation system and covered area.

Quick Selection Guide

Choose the 3000 mm natural white oak veneered acoustic slat panel when you need a genuine wood surface, light and natural large-format interior finishing and improved acoustic comfort in the room.

Natural White Oak Finish for Higher Walls and Improved Room Acoustics

The decorative acoustic panel combines MDF slats, natural white oak veneer and a black sound-absorbing PET fiber backing. The genuine wood surface gives the interior a warm, natural and individual character, while the 3000 mm length is particularly suitable for higher walls and seamless large-format compositions.

The declared NRC 0.8 sound absorption coefficient and PET acoustic backing help reduce sound reflections, echo and reverberation within the room. The panels can be used in residential, working and commercial indoor spaces.

One 3000×600×22 mm panel covers 1.80 m² and can be installed vertically or horizontally. For improved acoustic performance, the panels can be installed on a framework with an air gap and an additional sound-absorbing layer.