Decorative Acoustic Wall | Ceiling Panel | Slatted Panel | Interior Cladding | 3000x600x22mm | MDF + PET | Natural White Oak

Decorative Acoustic MDF Slat Panel – 3000×600×22 mm, Natural Oak Veneer, Light PET Felt, NRC 0.8, Whitewashed Oak

Decorative acoustic wall and ceiling panel consisting of MDF slats covered with natural oak veneer and sound-absorbing light PET fiber felt. It is designed for interior finishing, improving room acoustics and reducing the impact of unwanted echo and sound reflections.

Natural whitewashed oak veneer retains the texture, grain direction and natural surface variations of real wood. The light-colored slats and light acoustic PET backing create a uniform, calm and visually lightweight surface suitable for bright residential, office and commercial interiors.

The declared sound absorption coefficient is NRC 0.8. The actual sound absorption effect depends on the panel installation method, covered surface area, overall construction and room conditions.

• helps reduce echo in the room;
• reduces some unwanted sound reflections;
• may improve speech intelligibility;
• helps reduce the perception of reverberation;
• may contribute to a more comfortable working and relaxation environment;
• suitable for residential, office and commercial indoor spaces.

The surface of the MDF slats is covered with natural oak veneer in a whitewashed oak finish. Veneer is a thin layer of real wood, therefore the natural oak grain, texture and individual characteristics of the wood remain visible on the surface.

• genuine natural wood surface;
• light, warm and neutral tone;
• visible natural oak texture;
• the grain pattern of each slat may vary slightly;
• matches white, grey, beige and black surfaces;
• suitable for Scandinavian, minimalist and modern interiors;
• can be combined with concrete, glass, metal and stone finishes.

The rear backing of the panel is made from light-colored compressed PET fiber felt. According to the provided color information, it is light grey or grey-beige.

• absorbs part of the sound reaching the panel;
• helps reduce room reverberation;
• creates a light background between the whitewashed oak slats;
• creates a lighter and less contrasting appearance of the panel;
• provides the backing for the MDF slats;
• helps reduce the impact of sound reflected from hard surfaces.

The slats are based on MDF board with a stated emission class of CARB P2.

• MDF board with controlled formaldehyde emissions;
• provides a stable base for the natural veneer;
• helps maintain a consistent slat shape;
• suitable for interior finishing products;
• intended for use under normal dry indoor conditions.

The provided technical information states that PET acoustic felt, depending on the specific material version and testing system, may have different fire classifications:

• EN 13501-1:2018 classification;
• ASTM E84 Class A classification;
• an B1 flame-retardant PET felt version may also be specified.

• Natural oak veneer – for a genuine wood surface.
• Whitewashed oak color – for bright and neutral interiors.
• Light PET felt – for a uniform and less contrasting appearance.
• Sound absorption – helps reduce echo and reverberation in the room.
• NRC 0.8 – declared sound absorption rating.
• MDF base – for a stable slat construction.
• Natural wood grain – each panel may vary slightly.
• Installation with screws or suitable adhesive – depending on the substrate.
• 3000 mm length – suitable for taller walls and large-format finishing.
• One panel covers 1.80 m².

• Living rooms – for TV walls or relaxation areas.
• Bedrooms – as a light feature wall behind the bed.
• Home offices – to reduce echo and sound reflections.
• Offices – for natural and understated interior finishing.
• Meeting rooms – to improve speech intelligibility.
• Hotels – for rooms and common areas.
• Restaurants and cafés – to improve acoustic comfort.
• Reception areas – as a representative natural wood background.
• Studios – for partial control of sound reflections.
• Educational spaces – to reduce reverberation.
• Retail spaces – as a light interior accent.
• Ceiling finishing – as a decorative and sound-absorbing surface.

For example, a whitewashed oak acoustic slat wall can be installed behind the TV in a taller living room. The 3000 mm long panels are installed vertically, maintaining a continuous slat rhythm.

The light PET felt is visible between the light-colored slats covered with natural oak veneer. Since the backing is not black, the entire wall finish looks brighter, calmer and less contrasting.

The PET acoustic backing helps absorb part of the sound travelling through the room and reflected from hard surfaces. The perception of echo may be reduced, while the natural wood surface becomes an expressive yet visually lightweight interior feature.

If greater sound absorption is required, the panels can be installed on a frame, leaving an air gap and, if necessary, adding an acoustic mineral wool layer.

For home users: suitable for living rooms, bedrooms, TV walls, home offices or other spaces where a light real-wood surface is to be combined with improved room acoustics.

For interior designers: the 3000 mm length, whitewashed oak veneer and light PET backing allow the creation of seamless, large-format and less contrasting wall compositions. Natural variations in the veneer pattern give the surface an individual character.

For offices and commercial spaces: it can be used in meeting rooms, offices, reception areas, hotels, restaurants, cafés and other spaces where both bright natural interior finishing and reduction of echo and reverberation are important.

For improving acoustics: suitable for rooms with many hard sound-reflecting surfaces. The panels help absorb part of the sound energy and reduce unwanted sound reflections within the room.

For installers: the panels can be installed vertically or horizontally, shortened to suit the required room height and adapted around electrical sockets, switches or other interior elements. When cutting, it is important to protect the natural veneer surface from chipping. Reliable mechanical fastening is recommended for ceilings.

1. Measure the wall or ceiling. Calculate the required number of panels and allow for cutting waste.
2. Check the substrate. It must be dry, solid, level and free from loose finishing layers.
3. Acclimatize the panels. Before installation, keep them in the room where they will be installed.
4. Lay out the panels before fastening them. Consider natural variations in veneer shade and grain and select the most suitable arrangement.
5. Plan the slat direction. Decide whether the panels will be installed vertically or horizontally.
6. Mark the position of the first panel. Use a spirit level or laser level.
7. Cut the panel if necessary. Use a suitable fine-toothed woodworking cutting tool for MDF slats and a sharp knife for PET felt. Protect the veneer from chipping.
8. For adhesive installation, apply the mounting adhesive according to the instructions for the adhesive being used.
9. For screw installation, fasten the panel through the PET backing. Fastening points can be positioned between the slats.
10. Check the slat direction and spacing. Adjacent panels should form a continuous composition.
11. Cut openings for sockets and switches only after their positions have been accurately marked.
12. Finish visible edges. If necessary, use suitable finishing profiles or other edge-finishing solutions.
13. Remove dust after installation using a soft brush or vacuum cleaner.

• Remove dust using a vacuum cleaner with a soft brush attachment.
• Clean the veneered surface with a dry, soft cloth.
• Clean the light PET felt carefully without rubbing the surface excessively.
• Do not use excessive amounts of water.
• Do not spray cleaning products directly onto the veneer.
• Do not use abrasive products or aggressive solvents.
• Do not allow moisture to enter the MDF or the cut edges of the veneer.

• The panel is intended for dry indoor spaces.
• Do not use in locations where direct water exposure is possible.
• MDF and natural veneer are not intended for continuous exposure to high humidity.
• Acclimatize the panels in the installation room before installation.
• Arrange the panels before installation and match the natural wood shades.
• Check the actual panel and slat dimensions before cutting.
• Protect the natural veneer from chipping when cutting.
• Light PET felt may be more susceptible to visible dirt.
• Use fastening elements suitable for the substrate and panel weight.
• Mechanical fastening is recommended for ceilings.
• The suitability of adhesive-only installation on ceilings must be checked according to the technical conditions of the adhesive used.
• Disconnect the power supply before installation around electrical equipment.
• The panel is not a structural or load-bearing element.
• The NRC 0.8 result depends on the complete installation system and covered area.

Quick Selection Guide

Choose the 3000 mm whitewashed oak acoustic slat panel with light PET felt when you need a real wood surface, bright and less contrasting large-format interior finishing and improved acoustic comfort in the room.

Natural Whitewashed Oak Veneer for Taller Walls and Light Acoustic Backing

The decorative acoustic panel combines MDF slats, natural oak veneer and a light sound-absorbing PET fiber backing. The whitewashed oak color and light gaps between the slats create a calm, warm and visually lightweight surface, while the 3000 mm length is particularly suitable for taller walls and seamless large-format compositions.

The declared NRC 0.8 sound absorption coefficient and PET acoustic backing help reduce sound reflections, echo and reverberation within the room. The panels can be used in residential, office and commercial indoor spaces.

One 3000×600×22 mm panel covers 1.80 m² and can be installed vertically or horizontally. For improved acoustic performance, the panels can be installed on a frame with an air gap and an additional sound-absorbing layer.