Decorative Acoustic Wall | Ceiling Panel | Slatted Panel | Interior Cladding | 3000x600x22mm | MDF + PET | White Oak Imitation

Decorative Acoustic MDF Slat Panel – 3000×600×22 mm, PET Felt, NRC 0.8, White Oak

Decorative acoustic wall and ceiling panel consists of wood-look MDF slats and sound-absorbing PET fibre felt. It is designed for interior finishing, improving room acoustics and reducing unwanted echo and sound reflections.

The white oak technical wood veneer gives the panel a natural wood appearance, while the black acoustic backing highlights the vertical slats and helps create a modern, rhythmic wall or ceiling surface.

The manufacturer declares a sound absorption coefficient of NRC 0.8. This means that a properly installed panel system can absorb a significant portion of the sound energy reaching it.

• helps reduce echo in the room;
• reduces unwanted sound reflections;
• can improve speech intelligibility;
• helps reduce the perception of noise in common areas;
• suitable for music, work and relaxation spaces.

The surface of the MDF slats is covered with technical wood veneer in a white oak pattern. It reproduces the texture of natural wood while helping maintain a more uniform colour and grain direction.

• light and neutral white oak shade;
• suitable for Scandinavian and modern interiors;
• matches well with white, grey and black surfaces;
• can be combined with concrete, metal and glass;
• natural wood appearance without a solid wood construction.

The slat core is made of MDF board, for which the manufacturer specifies an emission class of CARB P2.

• MDF board with controlled formaldehyde emissions;
• suitable for interior finishing products;
• uniform structure helps maintain the precise shape of the slats;
• surface suitable for decorative veneer;
• stable construction under indoor conditions.

The black rear backing is made of compressed PET fibre. This layer acts as a sound-absorbing material and also holds the MDF slats together in one panel.

• absorbs part of the sound reaching the panel;
• reduces reverberation in the room;
• creates a contrasting black background between the slats;
• allows the panel to be more easily adapted to walls or ceilings;
• helps reduce acoustic reflections from hard surfaces.

According to the manufacturer's data, the acoustic PET felt, depending on the specific version and testing system, may achieve:

• EN 13501-1:2018 classification;
• ASTM E84 Class A classification;
• an B1 flame-retardant PET felt version is also mentioned.

• Acoustic sound absorption – reduces echo and unwanted reverberation.
• NRC 0.8 – declared high sound absorption efficiency.
• MDF slat construction – for a rhythmic and modern wall design.
• PET acoustic felt – absorbs sound and supports the slats.
• White oak veneer – creates a light natural wood effect.
• Technical wood surface – provides a more uniform colour and pattern.
• CARB P2 MDF – controlled formaldehyde emissions.
• Optional flame-retardant PET felt – depending on the specific product version.
• Installation with screws or adhesive – depending on the substrate construction.
• Suitable for walls and ceilings – for various interior solutions.
• Large-format panel – one panel covers 1.80 m².

• Living rooms – for TV walls or accent interior zones.
• Bedrooms – for walls behind beds or relaxing environments.
• Home offices – to reduce echo and improve sound during video calls.
• Offices – for decorative and acoustic wall finishing.
• Meeting rooms – to improve speech intelligibility.
• Hotels – for rooms, corridors and common areas.
• Restaurants and cafés – to reduce perceived noise and echo.
• Reception areas – as a decorative wall background and acoustic comfort element.
• Studios – for partial control of sound reflections.
• Educational spaces – to improve speech clarity and reduce reverberation.
• Retail spaces – for accent walls and interior zones.
• Ceiling finishing – where a decorative and sound-absorbing surface is required.

For example, a white oak slat acoustic wall can be installed behind a television in a living room. The panels are installed vertically from floor to ceiling, with their edges joined so that the slat pattern remains continuous.

The black PET felt is visible between the light MDF slats and creates a contrast. At the same time, it absorbs part of the sound reflected from the television, speakers, furniture and hard walls.

The perception of echo in the room is reduced, while the wall becomes a distinctive interior feature. Openings for electrical sockets, TV brackets or lighting elements can also be made in the panel.

If greater sound absorption is required, the panels can be installed on a batten framework with an additional layer of acoustic mineral wool behind them.

For home users: suitable for living rooms, bedrooms, TV walls, home offices or other spaces where decorative wood-look finishing is to be combined with improved room acoustics.

For interior designers: allows vertical or horizontal slat compositions, accent walls and ceiling zones to be created, combining a white oak surface with a black PET acoustic backing.

For offices and commercial spaces: can be used in meeting rooms, offices, reception areas, hotels, restaurants, cafés and other spaces where both interior appearance and reduction of echo and reverberation are important.

For acoustic improvement: suitable for rooms containing many hard, sound-reflecting surfaces. The panels help absorb part of the sound energy and reduce unwanted sound reflections within the room.

For installers: the panels can be installed vertically or horizontally, cut to the required dimensions and adapted around electrical sockets, switches or other interior elements. Mechanical fastening or suitable mounting adhesive can be used on walls, while reliable mechanical fastening is recommended for ceilings.

1. Measure the wall or ceiling. Calculate the required number of panels and allow for cutting waste.
2. Check the substrate. It must be dry, solid, level and free from loose finishing layers.
3. Plan the slat direction. Decide in advance whether the panels will be installed vertically or horizontally.
4. Mark the position of the first panel. Use a spirit level or laser level.
5. Cut the panel if required. MDF slats should be cut with a suitable wood-cutting tool, while PET felt should be cut with a sharp knife.
6. When using adhesive, apply the mounting adhesive to the back of the panel according to the adhesive manufacturer's instructions.
7. When using screws, fasten the panel through the PET backing. Screw heads can be concealed in the black felt between the slats.
8. Check vertical alignment and slat spacing. The next panel must continue the same pattern.
9. Cut openings for sockets and switches only after their positions have been accurately marked.
10. Finish the edges. Suitable finishing profiles or edge slats can be used for visible cut edges.
11. After installation, remove dust using a soft brush or vacuum cleaner.

• Remove dust with a vacuum cleaner using a soft furniture or brush attachment.
• Clean the surface with a dry, soft cloth.
• Clean the gaps between the slats with a soft brush.
• Do not use excessive amounts of water.
• Do not use abrasive sponges.
• Do not use aggressive chemical cleaners.
• Do not allow moisture to enter the cut edges of the MDF slats.

• The panel is intended for dry indoor areas.
• Do not use in locations exposed to direct water.
• MDF is not intended for continuous exposure to high humidity.
• Before installation, allow the panels to acclimatise to the room temperature.
• Check the actual panel and slat dimensions before cutting.
• Use screws and anchors suitable for the substrate and panel weight.
• Mechanical fastening is recommended for ceilings.
• The suitability of adhesive-only installation on ceilings must be confirmed by the adhesive manufacturer.
• Disconnect the power supply before working around electrical equipment.
• The panel is not a structural or load-bearing element.
• The NRC 0.8 result depends on the complete tested installation system.
• Check the fire classification according to the certificate for the specific product.
• Project-specific installation should be carried out by a qualified finishing or construction specialist.

Quick selection guide

Choose the white oak acoustic slat panel when you need modern wall or ceiling finishing that also helps reduce echo and unwanted sound reflections in the room.

Modern wood slat finishing and improved room acoustics

The white oak decorative acoustic panel combines MDF slats, technical wood veneer and a black sound-absorbing PET fibre backing. The rhythm of the vertical slats gives the interior a modern natural wood character.

The declared NRC 0.8 sound absorption coefficient helps reduce unwanted echo, reverberation and sound reflections. The panels can be used in homes, offices, hotels, restaurants, meeting rooms and other indoor spaces.

The 3000×600×22 mm panel covers 1.80 m² and can be installed vertically or horizontally using screws or suitable mounting adhesive. For improved acoustic performance, it can be installed on a framework with an air gap and an additional sound-absorbing layer.