Decorative Acoustic Wall | Ceiling Panel | Slatted Panel | Interior Cladding | 600x600x22mm | MDF + PET | Black Oak Finish

Decorative acoustic MDF slat panel – 600×600×22 mm, PET felt, NRC 0.8, black oak finish

Decorative acoustic wall and ceiling panel made of wood-pattern MDF slats and sound-absorbing PET fibre felt. It is designed for interior finishing, improving room acoustics and reducing the impact of unwanted echo and sound reflections.

Black oak engineered wood veneer features a rich black or very dark grey tone with a visible longitudinal wood grain pattern. The black acoustic PET backing visually blends with the dark slats and helps create a uniform, modern and solid wall or ceiling surface.

The declared sound absorption coefficient is NRC 0.8. The actual sound absorption effect depends on the panel installation method, the complete construction and the conditions of the room.

• helps reduce echo in the room;
• reduces unwanted sound reflections;
• may improve speech intelligibility;
• helps reduce the perception of reverberation;
• suitable for residential, work, social and leisure spaces.

The MDF slat surface is covered with engineered wood veneer featuring a black oak pattern. The finish is characterised by a rich black or very dark grey background and a visible longitudinal oak wood grain pattern.

• rich black oak shade;
• black or very dark grey wood tone;
• visible longitudinal oak grain pattern;
• modern and solid surface appearance;
• matches white, grey, beige and black surfaces;
• can be combined with concrete, metal, glass and stone finishes;
• suitable for modern, industrial and minimalist interiors.

The slats are made using MDF board with the specified emission class CARB P2.

• MDF board with controlled formaldehyde emissions;
• suitable for interior finishing products;
• uniform structure helps maintain the shape of the slats;
• surface suitable for decorative finishing;
• designed for use under normal indoor conditions.

The black rear backing is made of compressed PET fibres. PET felt forms the acoustic backing to which the MDF slats are attached.

• absorbs part of the sound reaching the panel;
• helps reduce reverberation in the room;
• visually blends with the black oak slats and creates a uniform background;
• forms the backing for the MDF slats;
• helps reduce the effect of sound reflected from hard surfaces.

The provided technical information states that acoustic PET felt may have different fire classifications depending on the specific version and testing system:

• EN 13501-1:2018 classification;
• ASTM E84 Class A classification;
• an B1 flame-retardant PET felt version is also mentioned.

• Sound absorption – helps reduce echo and reverberation in the room.
• NRC 0.8 – declared sound absorption rating.
• MDF slat construction – creates a rhythmic and modern surface design.
• PET acoustic felt – provides a sound-absorbing backing.
• Black oak finish – creates a rich and solid dark wood effect.
• CARB P2 MDF – controlled formaldehyde emissions.
• Installation with screws or suitable adhesive – according to the substrate construction.
• Suitable for walls and ceilings – for various interior solutions.
• Square 600×600 mm format – suitable for modular compositions.
• One panel covers 0.36 m².

• Living rooms – for TV walls or dark accent interior areas.
• Bedrooms – behind the bed or as a decorative accent area.
• Home offices – to reduce echo and sound reflections.
• Office rooms – for modern decorative and acoustic finishing.
• Meeting rooms – to improve speech intelligibility.
• Hotels – for rooms, corridors and common areas.
• Restaurants and cafés – to improve acoustic comfort.
• Reception areas – as a solid and representative wall background.
• Studios – for partial control of sound reflections.
• Educational spaces – to reduce reverberation.
• Retail spaces – as an expressive contemporary interior accent.
• Ceiling finishing – where a decorative and sound-absorbing surface is required.

For example, a decorative black oak slat area can be created behind the TV in a living room. The 600×600 mm panels can be arranged in several rows, maintaining a continuous slat rhythm or deliberately changing the slat direction.

The black PET felt between the dark MDF slats does not create strong contrast, so the entire surface appears uniform, deep and solid. The longitudinal oak grain remains visible and maintains the appearance of a natural wood structure.

The square format allows the entire wall to be covered or only selected accent areas to be created, for example behind a TV, desk, bed or relaxation area.

If greater sound absorption is required, the panels can be installed on a frame with an air gap and, if necessary, an additional acoustic mineral wool layer.

For home users: suitable for living rooms, bedrooms, TV walls, home offices or other spaces where a rich dark wood finish is combined with improved room acoustics.

For interior designers: the 600×600 mm modular format allows the creation of accent areas of different sizes, vertical or horizontal slat compositions, and combinations of the black oak surface with a black PET acoustic backing.

For offices or commercial spaces: it can be used in meeting rooms, offices, reception areas, hotels, restaurants, cafés and other spaces where both a representative interior appearance and reduced echo and reverberation are important.

For acoustic improvement: suitable for rooms with many hard sound-reflecting surfaces. The panels help absorb part of the sound energy and reduce unwanted sound reflections within the room.

For installers: the square 600×600 mm format is convenient for smaller areas and around other interior elements. The panels can be oriented vertically or horizontally, cut to the required dimensions and adapted around electrical sockets, switches and other elements. Reliable mechanical fastening is recommended for ceilings.

1. Measure the wall or ceiling. Calculate the required number of panels and allow for cutting waste.
2. Check the substrate. It must be dry, solid, level and free from loose finishing layers.
3. Plan the slat direction. Decide how the slats of individual 600×600 mm panels will be oriented.
4. Mark the position of the first panel. Use a spirit level or laser level.
5. Cut the panel if necessary. MDF slats should be cut with a tool suitable for wood, while PET felt can be cut with a sharp knife.
6. For adhesive installation, apply mounting adhesive according to the adhesive manufacturer's instructions.
7. For screw installation, fasten the panel through the PET backing. Fastening points can be positioned between the slats.
8. Check the panel position and slat rhythm. Adjacent panels should create the intended continuous composition.
9. Cut openings for sockets and switches only after accurately marking their positions.
10. Finish visible edges. If necessary, use suitable finishing profiles or other edge finishing solutions.
11. Remove dust after installation using a soft brush or vacuum cleaner.

• Remove dust with a vacuum cleaner equipped with a soft brush attachment.
• Clean the surface with a dry soft cloth.
• Clean the gaps between the slats with a soft brush.
• Do not use large amounts of water.
• Do not use abrasive sponges.
• Do not use aggressive chemical cleaners.
• Prevent moisture from reaching the cut edges of the MDF slats.

• The panel is intended for dry indoor spaces.
• Do not use in areas exposed to direct water contact.
• MDF is not intended for continuous exposure to high humidity.
• Allow the panels to acclimatise to the room conditions before installation.
• Check the actual panel and slat dimensions before cutting.
• Use fastening elements suitable for the substrate and panel weight.
• Reliable mechanical fastening is recommended for ceilings.
• The suitability of adhesive-only installation on ceilings must be checked according to the adhesive's technical specifications.
• Disconnect the power supply before working around electrical equipment.
• The panel is not a structural or load-bearing element.
• The NRC 0.8 result depends on the complete installation system and covered area.

Quick selection guide

Choose the 600×600 mm black oak acoustic slat panel when you need a modular, dark and contemporary wall or ceiling finish that can also help reduce echo and unwanted sound reflections in the room.

Modular black oak finish and improved room acoustics

The black oak decorative acoustic panel combines MDF slats with a black sound-absorbing PET fibre backing. The rich black or very dark grey wood finish gives the interior a solid, expressive and contemporary character.

The declared NRC 0.8 sound absorption coefficient and PET acoustic backing help reduce sound reflections, echo and reverberation occurring in the room. The panels can be used in residential, work and commercial indoor spaces.

One 600×600×22 mm panel covers 0.36 m². The square format provides greater flexibility for changing the slat direction and creating individual modular compositions, while for improved acoustic performance the panels can be installed on a frame with an air gap and an additional sound-absorbing layer.