Decorative Acoustic Wall | Ceiling Panel | Slatted Panel | Interior Cladding | 600x600x22mm | MDF + PET | Natural Oiled Oak

Decorative Acoustic MDF Slat Panel – 600×600×22 mm, Natural Oak Veneer, Black PET Felt, NRC 0.8, Oiled Oak

Decorative acoustic wall and ceiling panel consisting of MDF slats covered with natural oak veneer and sound-absorbing black PET fiber felt. It is designed for interior finishing, improving room acoustics, and reducing the impact of unwanted echo and sound reflections.

Natural oak veneer in an oiled oak shade retains the texture of real wood, grain direction and natural surface variations. The warm, richer oak tone contrasts with the black acoustic PET backing and helps create a natural, solid and expressive wall or ceiling surface.

The declared sound absorption coefficient is NRC 0.8. The actual sound absorption performance depends on the panel installation method, covered surface area, overall construction and room conditions.

• helps reduce echo in the room;
• reduces some unwanted sound reflections;
• can improve speech intelligibility;
• helps reduce the perception of reverberation;
• can contribute to a more comfortable working and living environment;
• suitable for residential, working and commercial indoor spaces.

The MDF slat surface is covered with natural oak veneer in an oiled oak shade. Veneer is a thin layer of real wood, so the surface retains the natural wood texture, grain direction, pattern variation and colour transitions.

• genuine natural wood surface;
• warm and richer oak shade;
• visible natural longitudinal wood grain;
• lighter and darker wood tones may be visible;
• the grain pattern of each slat may vary slightly;
• matches black, white, grey and beige surfaces;
• suitable for modern, classic and minimalist interiors;
• can be combined with concrete, glass, metal and stone finishes.

The rear backing of the panel is made of black compressed PET fiber felt. The PET felt provides the acoustic backing to which the MDF slats are attached and also creates a contrasting background between the warm oak-coloured slats.

• absorbs part of the sound reaching the panel;
• helps reduce room reverberation;
• creates a contrasting background between the oak slats;
• emphasizes the rhythm and geometry of the slats;
• provides a backing for the MDF slats;
• helps reduce the impact of sound reflected from hard surfaces.

The slats are made using MDF board with a declared emission class of CARB P2.

• MDF board with controlled formaldehyde emissions;
• provides a stable base for the natural veneer;
• helps maintain uniform slat shape;
• suitable for interior finishing products;
• intended for use under normal dry indoor conditions.

The provided technical data indicate that the acoustic PET felt may have different fire classifications depending on the specific material version and testing system:

• EN 13501-1:2018 classification;
• ASTM E84 Class A classification;
• a B1 flame-retardant PET felt version may also be available.

• Natural oak veneer – for a genuine wood surface.
• Oiled oak shade – for a warm and richer interior.
• Black PET felt – for strong contrast between the slats.
• Sound absorption – helps reduce echo and reverberation in the room.
• NRC 0.8 – declared sound absorption rating.
• MDF base – for a stable slat construction.
• Natural wood grain – each panel may vary slightly.
• 600×600 mm modular format – for creating various compositions.
• Different slat directions can be combined.
• One panel covers 0.36 m².

• Living rooms – for TV walls or relaxation areas.
• Bedrooms – for walls behind beds and a more comfortable interior.
• Home offices – to reduce echo and sound reflections.
• Office rooms – for natural and solid-looking interior finishing.
• Meeting rooms – to improve speech intelligibility.
• Hotels – for rooms and common areas.
• Restaurants and cafés – to improve acoustic comfort.
• Reception areas – as a representative natural wood background.
• Studios – for partial control of sound reflections.
• Educational spaces – to reduce reverberation.
• Retail spaces – as a warm and expressive interior accent.
• Ceiling finishing – as a decorative and sound-absorbing surface.

For example, an acoustic slat feature area in an oiled oak shade can be created behind a TV in a living room. The 600×600 mm panels can be arranged in several rows, maintaining the same slat direction or deliberately changing it.

Black PET felt is visible between the slats covered with warm oak veneer, creating an expressive contrast. The dark background emphasizes the geometry of the slats, while the natural wood texture and richer oak tone give the surface a warm and solid appearance.

The square format allows an entire wall to be covered or only selected accent areas to be created, for example behind a TV, desk, bed or relaxation corner.

If greater sound absorption is required, the panels can be installed on a frame with an air gap and, if necessary, an additional acoustic mineral wool layer.

For home users: suitable for living rooms, bedrooms, TV walls, home offices or other spaces where a genuine oak surface, warm richer shade and improved room acoustics are desired.

For interior designers: the 600×600 mm modular format allows the creation of accent areas of various sizes, changing the slat direction of individual panels and using natural variations in oak veneer grain and colour as a design element.

For offices and commercial spaces: it can be used in meeting rooms, offices, reception areas, hotels, restaurants, cafés and other spaces where both representative natural wood finishing and reduced echo and reverberation are important.

For acoustic improvement: suitable for rooms containing many hard, sound-reflecting surfaces. The panels help absorb part of the sound energy and reduce unwanted sound reflections within the room.

For installers: the square 600×600 mm format is convenient for smaller areas and around other interior elements. Panels can be cut to the required dimensions and adapted around electrical sockets, switches or other elements. When cutting, the natural veneer surface should be protected from chipping. Reliable mechanical fastening is recommended for ceilings.

1. Measure the wall or ceiling. Calculate the required number of panels and allow extra material for cutting.
2. Check the substrate. It must be dry, solid, level and free from loose finishing layers.
3. Acclimatize the panels. Before installation, keep them in the room where they will be installed.
4. Lay out the panels before fastening. Consider natural variations in veneer colour and grain and select the most suitable arrangement.
5. Plan the slat direction. Decide how the slats of the individual 600×600 mm panels will be oriented.
6. Mark the position of the first panel. Use a spirit level or laser level.
7. Cut the panel if necessary. Use a suitable fine-toothed wood cutting tool for the MDF slats and a sharp knife for the PET felt. Protect the veneer from chipping.
8. For adhesive installation, apply mounting adhesive according to the adhesive manufacturer's instructions.
9. For screw installation, fasten the panel through the PET backing. Fastening points can be positioned between the slats.
10. Check the panel position and slat rhythm. Adjacent panels should create the desired composition.
11. Cut openings for sockets and switches only after accurately marking their positions.
12. Finish visible edges. If necessary, use suitable finishing profiles or other edge-finishing solutions.
13. Remove dust after installation using a soft brush or vacuum cleaner.

• Remove dust with a vacuum cleaner equipped with a soft brush attachment.
• Clean the veneered surface with a dry soft cloth.
• Clean the gaps between the slats with a soft brush.
• Do not use excessive amounts of water.
• Do not spray cleaning products directly onto the veneer.
• Do not use abrasive products or aggressive solvents.
• Do not allow moisture to enter the MDF or the cut edges of the veneer.

• The panel is intended for dry indoor areas.
• Do not use in locations where direct exposure to water is possible.
• MDF and natural veneer are not intended for continuous exposure to high humidity.
• Acclimatize the panels in the installation room before installation.
• Arrange the panels before installation and match the natural wood tones.
• Check the actual panel and slat dimensions before cutting.
• Protect the natural veneer from chipping during cutting.
• The colour name "oiled oak" does not by itself confirm that the surface has actually been oiled.
• Use fasteners suitable for the substrate and panel weight.
• Mechanical fastening is recommended for ceilings.
• The suitability of adhesive-only installation for ceilings must be verified according to the technical specifications of the adhesive used.
• Disconnect the power supply before working around electrical equipment.
• The panel is not a structural or load-bearing element.
• The NRC 0.8 result depends on the entire installation system and covered area.

Quick selection guide

Choose the 600×600 mm acoustic slat panel in an oiled oak shade with natural oak veneer and black PET felt when you need a genuine wood surface, modular interior finishing, a warm oak shade and improved acoustic comfort in the room.

Modular oiled oak finish with natural veneer and improved room acoustics

The decorative acoustic panel combines MDF slats, natural oak veneer and a black sound-absorbing PET fiber backing. The warm oiled oak shade gives the interior a natural and cosy appearance, while the black gaps between the slats emphasize their geometry and rhythm.

The declared NRC 0.8 sound absorption coefficient and PET acoustic backing help reduce sound reflections, echo and reverberation within the room. The panels can be used in residential, working and commercial indoor spaces.

One 600×600×22 mm panel covers 0.36 m². The square format provides greater flexibility when changing slat directions and creating individual modular compositions, while for improved acoustic performance the panels can be installed on a frame with an air gap and an additional sound-absorbing layer.