Decorative Acoustic Wall | Ceiling Panel | Slatted Panel | Interior Cladding | 600x600x22mm | MDF + PET | Natural White Oak

Decorative Acoustic MDF Slat Panel – 600×600×22 mm, Natural White Oak Veneer, PET Felt, NRC 0.8

Decorative acoustic wall and ceiling panel consisting of MDF slats covered with natural white oak veneer and sound-absorbing PET fibre felt. It is designed for interior finishing, improving room acoustics and reducing the impact of unwanted echo and sound reflections.

Natural white oak veneer retains the texture, grain pattern and natural shade variations of real wood. The light wood surface contrasts with the black acoustic PET backing and helps create a modern, warm and rhythmic wall or ceiling surface.

The declared sound absorption coefficient is NRC 0.8. The actual sound absorption performance depends on the panel installation method, the complete construction and the conditions of the room.

• helps reduce echo in the room;
• reduces unwanted sound reflections;
• may improve speech intelligibility;
• helps reduce the perception of reverberation;
• suitable for residential, working, communication and recreational spaces.

The surface of the MDF slats is covered with natural white oak veneer. This is a thin layer of real wood, so the surface retains the natural oak texture, grain direction and characteristic colour variation of wood.

• real natural wood surface;
• light white oak shade;
• naturally visible wood grain;
• each slat may have an individual grain pattern;
• warm and natural surface appearance;
• matches white, black, grey and beige surfaces;
• suitable for Scandinavian, modern and minimalist interiors;
• can be combined with concrete, glass, metal and natural stone.

The slats are made using MDF board with the specified emission class CARB P2.

• MDF board with controlled formaldehyde emissions;
• suitable for interior finishing products;
• uniform structure helps maintain the shape of the slats;
• provides a stable base for natural wood veneer;
• suitable for use under normal dry indoor conditions.

The black rear backing is made of compressed PET fibre. The PET felt forms the acoustic backing to which the MDF slats are attached.

• absorbs part of the sound reaching the panel;
• helps reduce room reverberation;
• creates a contrasting background between the light oak slats;
• provides the mounting base for the MDF slats;
• helps reduce the impact of sound reflected from hard surfaces.

The provided technical information states that the acoustic PET felt, depending on the specific version and testing system, may have different fire classifications:

• EN 13501-1:2018 classification;
• ASTM E84 Class A classification;
• an additional flame-retardant B1 PET felt version is also mentioned.

• Natural white oak veneer – genuine wood surface.
• Individual wood grain pattern – the grain of each slat may vary.
• Sound absorption – helps reduce echo and reverberation in the room.
• NRC 0.8 – declared sound absorption rating.
• MDF slat construction – for a rhythmic and modern surface design.
• PET acoustic felt – sound-absorbing backing.
• CARB P2 MDF – controlled formaldehyde emissions.
• Compact 600×600 mm modular format – for creating different compositions.
• Suitable for walls and ceilings – for various interior solutions.
• One panel covers 0.36 m².

• Living rooms – for TV walls or accent interior areas.
• Bedrooms – for walls behind beds and a more natural atmosphere.
• Home offices – to reduce echo and sound reflections.
• Office rooms – for natural wood and acoustic finishing.
• Meeting rooms – to improve speech intelligibility.
• Hotels – for rooms, corridors and common areas.
• Restaurants and cafés – to improve acoustic comfort.
• Reception areas – as a bright and representative wall background.
• Studios – for partial control of sound reflections.
• Training rooms – to reduce reverberation.
• Retail spaces – as a natural and contemporary interior accent.
• Ceiling finishing – when a decorative and sound-absorbing surface is required.

For example, an acoustic accent zone made of natural white oak slats can be created behind a television in a living room. The 600×600 mm panels can be arranged in several rows, maintaining the same slat direction or intentionally changing it.

The black PET felt is visible between the light natural oak slats and creates a strong contrast. The genuine wood grain gives each panel an individual and natural appearance.

The square format allows an entire wall to be covered or selected accent zones to be created, such as a TV wall, work desk, bed or relaxation area background.

If greater sound absorption is required, the panels can be installed on a frame with an air gap and, if necessary, an additional acoustic mineral wool layer.

For home users: suitable for living rooms, bedrooms, TV walls, home offices or other spaces where a genuine wood surface is to be combined with improved room acoustics.

For interior designers: the 600×600 mm modular format allows accent zones of different sizes to be created, the direction of the slats on individual panels to be changed, and natural variations in the white oak veneer grain to be used as a design element.

For offices and commercial spaces: suitable for meeting rooms, offices, reception areas, hotels, restaurants, cafés and other spaces where both a natural interior appearance and reduced echo and reverberation are important.

For acoustic improvement: suitable for rooms containing many hard, sound-reflecting surfaces. The panels help absorb part of the sound energy and reduce unwanted sound reflections within the room.

For installers: the square 600×600 mm format is convenient for arranging smaller areas and working around other interior elements. Panels can be cut to the required dimensions and adapted around electrical sockets, switches and other elements. When cutting, the natural veneer surface should be protected against chipping. Reliable mechanical fixing is recommended for ceilings.

1. Measure the wall or ceiling. Calculate the required number of panels and allow additional material for cutting.
2. Check the substrate. It must be dry, solid, level and free from loose finishing layers.
3. Acclimatise the panels. Before installation, keep them in the room where they will be installed.
4. Lay out the panels before fixing. Consider natural variations in veneer shade and grain and select the most suitable arrangement.
5. Plan the slat direction. Decide how the slats of the individual 600×600 mm panels will be oriented.
6. Mark the position of the first panel. Use a spirit level or laser level.
7. Cut the panel if required. Use a suitable fine-toothed woodworking cutting tool for the MDF slats and a sharp knife for the PET felt. Protect the veneer against chipping.
8. For adhesive installation, apply the mounting adhesive according to the adhesive manufacturer's instructions.
9. For screw installation, fix the panel through the PET backing. Fixing points can be positioned between the slats.
10. Check the panel position and slat rhythm. Adjacent panels should create the desired composition.
11. Cut openings for sockets and switches only after their positions have been accurately marked.
12. Finish visible edges. If required, use suitable finishing profiles or other edge-finishing solutions.
13. Remove dust after installation using a soft brush or vacuum cleaner.

• Remove dust using a vacuum cleaner with a soft brush attachment.
• Clean the veneered surface with a dry, soft cloth.
• Clean the gaps between the slats with a soft brush.
• Do not use excessive amounts of water.
• Do not spray cleaning products directly onto the veneer.
• Do not use abrasive products or aggressive solvents.
• Do not allow moisture to enter the cut edges of the veneer and MDF.

• The panel is intended for dry indoor areas.
• Do not use in areas exposed to direct water.
• MDF and natural veneer are not intended for continuous exposure to high humidity.
• Acclimatise the panels in the installation room before installation.
• Arrange the panels before installation to coordinate natural wood shades.
• Check the actual panel and slat dimensions before cutting.
• Protect the natural veneer against chipping during cutting.
• Use fixing elements suitable for the substrate and panel weight.
• Mechanical fixing is recommended for ceilings.
• The suitability of adhesive-only installation on ceilings must be verified according to the technical specifications of the adhesive used.
• Disconnect the power supply before carrying out work around electrical equipment.
• The panel is not a structural or load-bearing element.
• The NRC 0.8 result depends on the complete installation system and covered area.

Quick Selection Guide

Choose the 600×600 mm acoustic slat panel with natural white oak veneer when you need a genuine wood surface, modular light-coloured interior finishing and improved acoustic comfort in the room.

Modular Natural White Oak Finish and Improved Room Acoustics

The decorative acoustic panel combines MDF slats, natural white oak veneer and a black sound-absorbing PET fibre backing. The genuine wood surface gives the interior a warm, natural and individual character.

The declared NRC 0.8 sound absorption coefficient and PET acoustic backing help reduce sound reflections, echo and reverberation within the room. The panels can be used in residential, working and commercial indoor spaces.

One 600×600×22 mm panel covers 0.36 m². The square format provides greater flexibility for changing the slat direction and creating individual modular compositions, while for improved acoustic performance the panels can be installed on a frame with an air gap and an additional sound-absorbing layer.