Decorative Acoustic Wall | Ceiling Panel | Slatted Panel | Interior Cladding | 600x600x22mm | MDF + PET | Natural White Oak

Decorative Acoustic MDF Slat Panel – 600×600×22 mm, Natural Oak Veneer, Light PET Felt, NRC 0.8, Whitewashed Oak

Decorative acoustic wall and ceiling panel consisting of MDF slats covered with natural oak veneer and sound-absorbing light PET fiber felt. It is designed for interior finishing, improving room acoustics and reducing the effect of unwanted echo and sound reflections.

Natural whitewashed oak veneer retains the texture of real wood, the direction of the grain and natural surface variations. The light-colored slats and light acoustic PET backing create a uniform, calm and visually lightweight surface suitable for bright residential, office and commercial interiors.

The declared sound absorption coefficient is NRC 0.8. The actual sound absorption performance depends on the panel installation method, the surface area covered, the overall construction and the conditions within the room.

• helps reduce echo in the room;
• reduces some unwanted sound reflections;
• may improve speech intelligibility;
• helps reduce the perception of reverberation;
• may contribute to a more comfortable working and resting environment;
• suitable for residential, office and commercial interior spaces.

The surface of the MDF slats is covered with natural oak veneer in a whitewashed oak finish. Veneer is a thin layer of real wood, which means that the natural oak grain, texture and individual characteristics of the wood remain visible on the surface.

• genuine natural wood surface;
• light, warm and neutral shade;
• visible natural oak texture;
• the grain pattern of each slat may vary slightly;
• matches white, grey, beige and black surfaces;
• suitable for Scandinavian, minimalist and modern interiors;
• can be combined with concrete, glass, metal and stone finishes.

The rear backing of the panel is made of light-colored compressed PET fiber felt. According to the provided color information, it is available in a light grey or grey-beige shade.

• absorbs part of the sound reaching the panel;
• helps reduce reverberation in the room;
• creates a light background between the whitewashed oak slats;
• creates a lighter and less contrasting visual appearance;
• provides the backing for the MDF slats;
• helps reduce the effect of sound reflected from hard surfaces.

The slats are based on MDF board with the specified emission class of CARB P2.

• MDF board with controlled formaldehyde emissions;
• provides a stable base for the natural veneer;
• helps maintain a consistent slat shape;
• suitable for interior finishing products;
• intended for use under normal dry indoor conditions.

The provided technical information indicates that PET acoustic felt may have different fire classifications depending on the specific material version and testing system:

• EN 13501-1:2018 classification;
• ASTM E84 Class A classification;
• a B1 flame-retardant PET felt version may also be specified.

• Natural oak veneer – for a genuine wood surface.
• Whitewashed oak color – for bright and neutral interiors.
• Light PET felt – for a uniform and less contrasting appearance.
• Sound absorption – helps reduce echo and reverberation in the room.
• NRC 0.8 – declared sound absorption rating.
• MDF base – for a stable slat construction.
• Natural wood grain – each panel may vary slightly.
• 600×600 mm modular format – for creating different compositions.
• Suitable for walls and ceilings.
• One panel covers 0.36 m².

• Living rooms – for TV walls or relaxation areas.
• Bedrooms – as a light feature wall behind the bed.
• Home offices – for reducing echo and sound reflections.
• Office spaces – for natural and understated interior finishing.
• Meeting rooms – for improving speech intelligibility.
• Hotels – for rooms and common areas.
• Restaurants and cafés – for improving acoustic comfort.
• Reception areas – as a representative natural wood background.
• Studios – for partial control of sound reflections.
• Educational spaces – for reducing reverberation.
• Retail spaces – as a bright interior accent.
• Ceiling finishing – as a decorative and sound-absorbing surface.

For example, a whitewashed oak acoustic slat feature can be created behind a television in a living room. The 600×600 mm panels can be arranged in several rows, maintaining a consistent slat direction or deliberately changing it.

The light PET felt is visible between the light natural oak veneer-covered slats. Since the backing is not black, the entire finish appears lighter, calmer and less contrasting.

The square format allows the entire wall to be covered or only selected feature areas to be created, such as a background behind a television, desk, bed or relaxation area.

If greater sound absorption is required, the panels can be installed on a frame, leaving an air gap and, if necessary, using an additional acoustic mineral wool layer.

For home users: suitable for living rooms, bedrooms, TV walls, home offices or other spaces where a light genuine wood surface is to be combined with improved room acoustics.

For interior designers: the 600×600 mm modular format allows feature areas of different sizes to be created, the direction of the slats on individual panels to be changed and natural variations in the whitewashed oak veneer grain to be used as a design element.

For offices and commercial spaces: suitable for meeting rooms, offices, reception areas, hotels, restaurants, cafés and other spaces where both a bright natural interior finish and reduced echo and reverberation are important.

For acoustic improvement: suitable for rooms containing many hard, sound-reflecting surfaces. The panels help absorb part of the sound energy and reduce unwanted sound reflections within the room.

For installers: the square 600×600 mm format is convenient for arranging smaller areas and working around other interior elements. The panels can be cut to the required dimensions and adapted around electrical sockets, switches or other elements. When cutting, the natural veneer surface should be protected against chipping. Reliable mechanical fixing is recommended for ceiling installations.

1. Measure the wall or ceiling. Calculate the required number of panels and allow additional material for cutting.
2. Check the substrate. It must be dry, solid, level and free from loose finishing layers.
3. Acclimatize the panels. Before installation, keep them in the room where they will be installed.
4. Lay out the panels before fixing them. Consider natural variations in veneer shade and grain and select the most suitable arrangement.
5. Plan the slat direction. Decide how the slats of individual 600×600 mm panels will be oriented.
6. Mark the position of the first panel. Use a spirit level or laser level.
7. Cut the panel if necessary. Use a suitable fine-toothed woodworking cutting tool for the MDF slats and a sharp knife for the PET felt. Protect the veneer against chipping.
8. When using adhesive, apply the mounting adhesive according to the adhesive manufacturer's instructions.
9. When using screws, fix the panel through the PET backing. Fixing points can be positioned between the slats.
10. Check the panel position and slat rhythm. Adjacent panels should create the desired composition.
11. Cut openings for sockets and switches only after their positions have been accurately marked.
12. Finish visible edges. If necessary, use suitable finishing profiles or other edge-finishing solutions.
13. Remove dust after installation using a soft brush or vacuum cleaner.

• Remove dust using a vacuum cleaner with a soft brush attachment.
• Clean the veneered surface with a dry, soft cloth.
• Clean the light PET felt carefully without rubbing the surface excessively.
• Do not use large amounts of water.
• Do not spray cleaning products directly onto the veneer.
• Do not use abrasive products or aggressive solvents.
• Do not allow moisture to penetrate the MDF or the cut edges of the veneer.

• The panel is intended for dry indoor spaces.
• Do not use in locations exposed to direct water.
• MDF and natural veneer are not intended for continuous exposure to high humidity.
• Acclimatize the panels in the installation room before installation.
• Lay out the panels before installation and match natural wood shades.
• Check the actual panel and slat dimensions before cutting.
• Protect the natural veneer against chipping during cutting.
• Light-colored PET felt may be more susceptible to visible dirt.
• Use fixing elements suitable for the substrate and panel weight.
• Mechanical fixing is recommended for ceilings.
• The suitability of adhesive-only installation on ceilings must be verified according to the technical specifications of the adhesive used.
• Disconnect the power supply before installation work around electrical equipment.
• The panel is not a structural or load-bearing element.
• The NRC 0.8 result depends on the complete installation system and the area covered.

Quick Selection Guide

Choose the 600×600 mm whitewashed oak acoustic slat panel with light PET felt when you need a genuine wood surface, modular, bright and less contrasting interior finishing, together with improved acoustic comfort in the room.

Modular Whitewashed Oak Finish with Natural Veneer and Light Acoustic Backing

This decorative acoustic panel combines MDF slats, natural oak veneer and a light sound-absorbing PET fiber backing. The whitewashed oak color and light gaps between the slats create a calm, warm and visually lightweight surface.

The declared NRC 0.8 sound absorption coefficient and PET acoustic backing help reduce sound reflections, echo and reverberation within the room. The panels can be used in residential, office and commercial indoor spaces.

One 600×600×22 mm panel covers 0.36 m². The square format provides greater flexibility when changing the slat direction and creating individual modular compositions. For improved acoustic performance, the panels can be installed on a frame with an air gap and an additional sound-absorbing layer.