Products catalog

  • Decorative radiator grille | plastic | 600×900×30 mm | cherry | R6090P

    Code: 41132

    Plastic decorative grille R6090P for covering a radiator niche or opening: 600×900×30 mm, cherry, horizontal louvres. Screw-fixed (screws not included).

  • Decorative radiator grille | plastic | 600×900×30 mm | cherry | R6090P

    Plastic decorative grille R6090P – a 900 mm wide and 600 mm high panel with horizontal louvres for covering a radiator niche, opening or box. Suitable when the radiator is recessed into the wall or boxed in and you want a neat, uniform look without plumbing work.

    Key idea:
    An old or unsightly radiator in a niche does not have to be replaced – it is enough to cover the opening. The flat 30 mm deep panel takes up little space, and the louvres let warm air out into the room.
    Dimensions
    600 × 900 × 30 mm
    Colour
    cherry
    Material
    plastic
    Purpose
    covering a niche or opening

    Operating principle

    The panel is fixed with screws to the niche or opening frame, the wall or the box frame in front of the radiator. Fixing hardware is not included – choose it according to the base.

    Air heated by the radiator rises and leaves into the room through the horizontal louvre openings. The panel hides the radiator but leaves a path for the air.

    The result is a smooth cherry surface instead of an open niche or an old radiator. For a wider opening, panels are mounted side by side.

    Why choose the R6090P grille?
    One module is 900 mm wide, so it can be combined with the other widths of the series (600, 900, 1200, 1500 mm) to cover a niche of almost any width.

    Technical specifications

    Product typeDecorative radiator grille (panel)
    ModelR6090P
    MaterialPlastic
    Height600 mm
    Width900 mm
    Depth30 mm
    Colourcherry
    SurfaceHorizontal louvres
    FixingWith screws, fixing hardware not included
    Series widths600 / 900 / 1200 / 1500 mm

    Main functions

    • Covering the opening – the radiator niche or opening looks like a neat part of the wall.
    • Air circulation – warm air leaves into the room through the louvre openings.
    • Slim design – the 30 mm deep panel barely protrudes from the wall plane.
    • Modular width – the four widths of the series combine for a wider opening.
    • Six colours – white, ivory, beige, grey, oak and cherry, to match a window sill or furniture.

    Where is it used?

    • Radiator niches under window sills in flats and houses
    • Renovated apartment buildings with radiators recessed into walls
    • Offices with finishing boxes around radiators
    • Hotel rooms and corridors
    • Healthcare and education premises where radiators are boxed in
    • Openings for ventilation or utility lines in walls that need a decorative cover

    Use by need

    For flat owners.
    Hides an old radiator in a niche without plumbing work or replacing the radiator.
    For finishing contractors.
    Quick finishing of the opening: the panel is screwed to the frame, the width is chosen from four modules.
    For interior designers.
    Six colours, including oak and cherry, let you match the grille to window sills and furniture.

    Practical application

    If the radiator is recessed into a niche 900 mm wide and 600 mm high under a window sill, then one R6090P panel covers the whole opening: it is screwed to the niche frame, and warm air continues to flow out through the louvres. If the niche is wider, an additional panel of the series is mounted alongside.

    Pros

    • Hides the radiator without plumbing work
    • Louvres leave a path for warm air
    • Only 30 mm deep
    • 4 widths can be combined
    • 6 colours for the interior
    • Light and easy to install

    Cons / limitations

    • Fixing hardware not included
    • This is a panel for an opening, not a cover for an open radiator – for that choose steel DRG grilles
    • The panel blocks part of the heat
    • Maximum permissible temperature is not specified – fix the panel to the frame, not to the radiator sections

    Safety and installation notes

    • Measure the width and height of the opening before installation.
    • Fix to the niche frame, wall or frame – not to the radiator or pipes.
    • Leave access to the thermostatic valve and the air vent.
    • Do not block the louvres with curtains or furniture – air must circulate freely.
    • When drilling into the wall, check for electrical cables and pipes.

    Quick selection guide

    600 × 900 × 30 mm
    cherry
    plastic
    screw fixing
    R6090P
    Suitable when you need:
    • to cover a radiator niche or opening
    • a neat finish without replacing the radiator
    • to match the colour to a window sill or furniture
    Check before use:
    • the width and height of the opening
    • whether there is a base for screws
    • whether access to the valve will remain
    Important reminder: the panel is not a cover for a radiator standing openly against the wall – steel DRG grilles are intended for that.

    FAQ

    What size is this panel?
    600 mm high, 900 mm wide and 30 mm deep.
    Are fixing screws included?
    No, choose the fixing hardware according to the base.
    What if the niche is wider?
    Mount several panels of the series side by side, combining 600, 900, 1200 and 1500 mm widths.
    Does the panel let heat through?
    Yes, warm air leaves through the horizontal louvre openings, although the panel blocks part of the heat.
    Will it fit an open cast-iron radiator?
    No – for an open cast-iron radiator choose steel DRG grilles.
    Which colours are available?
    White, ivory, beige, grey, oak and cherry.

    Decorative radiator grille | plastic | 600×900×30 mm | cherry | R6090P

    Plastic decorative radiator grille R6090P – a 600×900×30 mm cherry panel with horizontal louvres for covering a radiator niche or opening. Screw-fixed, combinable with the other widths of the series.

    Published: 2026-11-12 · Parameters according to supplier specification: 2026-11-12

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Extractor fan with backdraft shutter | D100 | 120 m³/h | 230V | 155x155x108mm | IP24 | ABS plastic | white | TY4STT
    Code: 02318

    A modern axial-type fan designed for both home users and professional installers or engineers seeking a reliable, efficient, and durable solution for continuous or periodic room ventilation. This model features a TURBO function for rapid air extraction, a backdraft valve to prevent odor return, and low noise levels.

    Price 34.52 € VAT incl.
    ( 28.53 € VAT excl. )
    Supply air ventilation grille in wall | with filter | white
    Code: SKU#168051250821911461

    A wall-mounted supply air valve with a filter is a solution that improves the indoor microclimate, protects the premises from dust, moisture, and noise, and prevents window condensation. This device is installed in the wall and is indispensable in modern ventilation systems, both in newly built homes and renovated buildings.

    Price 40.00 € VAT incl.
    ( 33.06 € VAT excl. )
    Flexible aluminum air duct | for ventilation | ventilation systems | D100mm | 3,15m | silver | LAO100U
    Code: 18711

    Flexible aluminum air duct - a reliable solution for various ventilation, air circulation and air extraction systems. Thanks to the 80 micron thick aluminum foil, the duct is durable, resistant to high temperature and maintains its shape even under demanding operating conditions.

    The lightweight, flexible and easy-to-install duct is suitable for connecting fans, heat recovery systems, air extraction ducts, kitchen hoods and other ventilation components. 

    Price 5.57 € VAT incl.
    ( 4.60 € VAT excl. )
    Supply air ventilation damper in wall | with G3 filter | aluminium grille with mesh | D125 | 0,5m | white | 12,5TOV-05
    Code: 09575

    Wall-mounted supply air vent D125 with a 500 mm insulated duct, G3 filter and adjustable diffuser. Outdoor side – aluminium outdoor grille with mosquito mesh. Intended for controlled air inflow in rooms with forced exhaust.

    Price 29.63 € VAT incl.
    ( 24.49 € VAT excl. )
  • privacy policy

    Information