Digital | programmable room thermostat | temperature controller | 3-16A | 200-240VAC | +5...+35°C | for heating | flush-mounted | white | EKT-2

Digital Programmable Room Thermostat EKT-2 – 3A / 16A, 200-240VAC, +5...+35°C, Flush-Mounted

Digital programmable room thermostat EKT-2 is designed for controlling heating systems in residential, commercial and administrative premises. The thermostat can control water heating valve actuators, thermal actuators, solenoid valves, electric heaters and electric underfloor heating. A large LCD display with blue backlight, weekly programming and memory function allow convenient maintenance of the desired room temperature.

• Programmable temperature control – allows heating operation to be set according to time and weekly mode.
• LCD display with blue backlight – for clearer viewing of temperature, time and settings.
• Dual temperature mode – for more convenient monitoring of room and set temperature.
• Memory function – helps retain settings after a power outage.
• 3A for water heating control – for controlling thermal actuators, valves or dampers.
• 16A for electric heating – for electric underfloor heating or electric heaters.
• NTC sensor – for temperature measurement and regulation.
• Flush-mounted installation – for aesthetic wall installation.
• Low energy consumption – power consumption below 0.3W.

• Residential houses – for controlling heating in rooms, living rooms, bedrooms or bathrooms.
• Apartments – for individual room temperature regulation.
• Electric underfloor heating systems – for switching underfloor heating on and off according to temperature.
• Water heating systems – for controlling actuators, dampers and solenoid valves.
• Offices – for regulating room heating modes according to working hours.
• Hotels and apartments – for individual room temperature control.
• Commercial premises – for heating regulation according to a weekly schedule.

For example, in an apartment bathroom, the thermostat is used to control electric underfloor heating. The user sets the desired temperature and weekly schedule so that heating operates more actively in the morning and evening, while using less energy during the day.

When the room temperature drops below the set value, the thermostat switches the heating on. When the set temperature is reached, the heating is switched off, maintaining comfort and reducing unnecessary energy consumption.

For a home user: convenient for maintaining the desired room temperature and controlling heating according to the daily routine.

For an electrician or installer: suitable for flush-mounted installation and different heating control scenarios depending on the load type.

For an underfloor heating system: allows electric underfloor heating to be controlled up to a 16A load, provided the system meets the technical parameters.

For a water heating system: can be used to control thermal actuators, dampers or solenoid valves up to a 3A load.

Before installation, it is necessary to check the heating system type, load current, power supply voltage and wiring diagram. If the controlled electric heating load exceeds the thermostat’s permitted 16A limit, an additional contactor or another suitable control solution must be used.

• Disconnect the power supply before installation.
• Check that the power supply voltage is AC 200-240V.
• Do not exceed a 3A load for water heating actuators.
• Do not exceed a 16A load for electric heating.
• Use an additional contactor if the load is higher than permitted for the thermostat.
• Install at a suitable height, avoiding direct sunlight, draughts and heat sources.
• Make sure the NTC sensor works correctly.
• Installation is recommended to be entrusted to an electrician.

Quick selection guide

Choose the programmable room thermostat EKT-2 when a flush-mounted digital temperature controller is needed for a heating system, electric underfloor heating, actuators, dampers or solenoid valves.

Programmable thermostat for convenient heating control

The digital programmable room thermostat EKT-2 is a practical solution for heating systems when room temperature needs to be controlled, operating time programmed and settings conveniently monitored on an LCD display with blue backlight.

Thanks to AC 200-240V power supply, 3A load for water heating control, 16A load for electric heating, +5...+35°C temperature setting range, ±0.5°C accuracy, NTC sensor, memory function and flush-mounted 86 x 86 x 17 mm format, this thermostat is suitable for homes, apartments, offices, hotels and other premises where reliable heating regulation is required.