Sound-insulated mixed-flow duct fan | D125 | 355 m³/h | 50 W | 230 V | 2 speeds | 690×233×236 mm | IPX4 | black | ESLP22881
Code: ESLP22881Price 107.09 € VAT incl.( 88.50 € VAT excl. )Sound-insulated mixed-flow duct fan ESLP22881: Ø125 mm, 2 speeds, 355 / 240 m³/h, 190 / 110 Pa, 23 / 17 dB(A), 50 W, 230 V, IPX4. Mounts in the duct in any position.
-
Sound-insulated mixed-flow duct fan | D125 | 355 m³/h | 50 W | 230 V | 2 speeds | 690×233×236 mm | IPX4 | black | ESLP22881
Mixed-flow duct fan for Ø125 mm ducts, built into a sound-absorbing housing. Two speeds: up to 355 / 240 m³/h and up to 190 / 110 Pa, with a supplier-stated noise level of 23 / 17 dB(A).
Key point:
The mixed-flow impeller develops more pressure than an axial fan, while the sound insulation dampens impeller and air noise. This allows the fan to be installed close to bedrooms, offices or meeting rooms where ventilation should be barely audible.Air flow
355 / 240 m³/hPressure
190 / 110 PaNoise
23 / 17 dB(A)Power / voltage
50 W / 230 VHow it works
The fan is inserted directly into the Ø125 mm duct run – air moves in a straight line. It can be mounted in any position on a bracket; supply is 230 V AC, 50 Hz.
The angled blade geometry accelerates air both axially and radially, so the fan holds higher pressure in longer runs with grilles or filters. The polypropylene housing with sound-absorbing lining reduces noise reaching the rooms.
Speed is selected by an external switch or relay contact according to the wiring diagram: low for quiet everyday ventilation, high for boost mode.
Why choose ESLP22881?
Quiet duct ventilation with two operating modes and no separate speed controller: up to 355 m³/h and only 17 dB(A) at low speed.Technical specifications
Product type Sound-insulated mixed-flow duct fan Product code ESLP22881 Supply 230 V AC, 50 Hz Power 50 W Speeds 2 (high / low) Air flow 355 / 240 m³/h Pressure 190 / 110 Pa Noise (supplier data) 23 / 17 dB(A) Duct diameter Ø125 mm Dimensions (L × W × H) 690×233×236 mm Motor single-phase Housing polypropylene (PP) with sound-absorbing lining, black Protection rating IPX4 Mounting any position, bracket Country of origin Turkey Main functions
- Two speeds – quiet everyday and boost mode without an extra controller.
- Mixed-flow impeller – up to 190 Pa, suitable for longer runs.
- Sound-insulated housing – lower noise in living spaces.
- Easy servicing – the motor unit is removed without taking the housing out of the run.
- IPX4 – protected against water splashes.
- Any mounting position – horizontal or vertical in the duct.
How the models in this series differ
- D100 · 250/180 m³/h – 190/110 Pa · 25/19 dB(A) · 690×233×236 mm
- D125 · 355/240 m³/h – 190/110 Pa · 23/17 dB(A) · 690×233×236 mm – this model
- D150 · 570/415 m³/h – 305/225 Pa · 27/22 dB(A) · 694×253×254 mm
- D160 · 570/415 m³/h – 305/225 Pa · 26/22 dB(A) · 694×253×254 mm
Where is it used?
- Bedrooms and children’s rooms
- Offices and meeting rooms
- Supply or exhaust systems in flats and houses
- Bathroom and WC extraction via duct
- Hotel rooms
- Medical consulting rooms
- Classrooms
Use by need
For the designer.
Flow, pressure and noise known for both speeds – easy to size for a Ø125 mm system.For the installer.
Inserted directly in the duct in any position; the motor is serviced without removing the housing.For the homeowner.
Quiet continuous ventilation in the bedroom and boost mode when needed.Practical use
If several rooms need quiet ventilation through a Ø125 mm duct, the fan runs daily at low speed (240 m³/h, 17 dB(A)) and switches to high speed (355 m³/h) when bathing, cooking or when more people are present. The stated flows are without resistance – in a long run with grilles they are lower, so allow a capacity margin.Pros
- Up to 355 m³/h, 2 speeds
- Supplier-stated noise 23 / 17 dB(A)
- Up to 190 Pa
- Removable motor unit
- IPX4, lightweight PP housing
- Mounts in any position
Cons / limitations
- Flow drops as system resistance increases
- The supplier does not state air temperature limits – not for hot air or process vapours
- Not certified for smoke extraction
- Long 690×233×236 mm housing – needs space in the run
Safety and installation notes
- Disconnect the supply and verify absence of voltage before installation and maintenance.
- Provide overload and short-circuit protection in the supply circuit; protect bathroom circuits with a 30 mA residual current device (RCD).
- IPX4 means splash protection: in damp rooms follow the HD 60364-7-701 zone requirements.
- Fix the fan to a solid base with the bracket and connect the ducts airtight.
- Inlet and outlet openings must not be blocked.
- Connection must be carried out by a qualified electrician.
Quick selection guide
Ø125 mm355 / 240 m³/h190 / 110 Pa23 / 17 dB(A)50 W / 230 VIPX4Suitable when you need:- Quiet ventilation of living or working spaces
- Supply or exhaust systems with Ø125 mm ducts
- Two operating modes without a separate controller
Check before use:- Whether the duct diameter is Ø125 mm
- Whether the 690×233×236 mm housing fits in the run
- Whether capacity is sufficient after duct resistance
- How the speeds will be switched (switch or relay)
Important reminder: The fan does not recover heat – it does not replace a heat recovery unit and works best when its capacity and pressure match the system resistance.FAQ
How are the speeds switched?
With an external two-position switch or relay contact; a timer, humidity or CO₂ sensor can control it.Can it be mounted vertically?
Yes, the fan can operate in any position.Which duct does ESLP22881 fit?
A Ø125 mm duct.Is it suitable for bathroom extraction?
Yes, the housing is IPX4; protect the circuit with a 30 mA RCD.Do I need to remove the fan to service the motor?
No, the motor unit is removed without dismantling the housing.Is it suitable for smoke extraction?
No, the fan is not certified for that.Sound-insulated mixed-flow duct fan | D125 | 355 m³/h | 50 W | 230 V | 2 speeds | 690×233×236 mm | IPX4 | black | ESLP22881
ESLP22881 is a sound-insulated mixed-flow duct fan for Ø125 mm: 2 speeds, 355 / 240 m³/h, 190 / 110 Pa, 23 / 17 dB(A), 50 W, 230 V, IPX4. For quiet ventilation of bedrooms, offices and meeting rooms.
Published: 2026-11-13 · Data verified against the supplier specification: 2026-11-13
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Digital duct temperature and humidity sensor with LCD | 0–10 V DC / 4–20 mACode: SKU#165278098976225941Digital duct sensor that measures air temperature and relative humidity in a duct, shows them on an LCD and sends them to a controller as a 0–10 V DC / 4–20 mA signal.
Price 168.43 € VAT incl.( 139.20 € VAT excl. )Rotary deflector D160 | ball bearings | ABS plastic | blueCode: 04512ABS plastic rotary deflector D160 with ball bearings, blue. Fits onto a Ø160 mm pipe or ventilation outlet and extracts air without electricity.
Price 95.59 € VAT incl.( 79.00 € VAT excl. )Rotary deflector D100 | ball bearings | 300×100 mm | galvanised steel | silverCode: 19427Galvanised steel rotary deflector (wind turbine) D100 with ball bearings. Fits onto a D100 ventilation duct, extracts air without electricity and protects the duct from rain and snow.
Price 78.89 € VAT incl.( 65.20 € VAT excl. )



























