Products catalog

  • Duct centrifugal fan | D200 | 900 m³/h | 135 W | 230 V | 540 Pa | plastic housing | white | 15624

    Code: 15624

    Duct centrifugal fan 15624: D200, up to 900 m³/h, 540 Pa, 135 W, 230 V, plastic housing.

  • Duct centrifugal fan | D200 | 900 m³/h | 135 W | 230 V | 540 Pa | plastic housing | white | 15624

    Fan for D200 round ducts: the 135 W, 230 V external-rotor motor delivers up to 900 m³/h airflow and up to 540 Pa pressure.

    Key point:
    Lightweight corrosion-resistant plastic housing, backward-curved impeller and a ball-bearing motor – a quiet and reliable choice for supply and extract systems in apartments, offices and commercial premises.
    Airflow
    900 m³/h
    Power / voltage
    135 W / 230 V
    Pressure
    540 Pa
    Noise
    55 dB(A)

    We will help you set up speed and automatic control

    We will advise how to adjust this fan's speed and how to switch or control it automatically according to room conditions – humidity, temperature or CO₂ concentration. We will select a suitable speed controller, thermostat, humidity or CO₂ sensor and explain how to connect them.

    Contact us: tel. +370 658 01033 or e-mail info@elsprendimai.eu

    In your e-mail, briefly describe the situation: room purpose and size, fan model and what you want to control – speed, humidity, temperature or CO₂.

    Wholesale quantities: special prices for larger orders. State the required quantity in your e-mail and we will send you an individual offer.

    Operating principle

    The backward-curved blades draw air in through the inlet spigot and push it radially into the housing, from where it continues along the same axis into the duct. This design builds more pressure than an axial fan, so airflow drops less across filters, dampers and bends.

    The motor runs at approx. 2650 rpm with a rated current of 0.61 A. Speed can be adjusted smoothly with a thyristor (triac) or autotransformer controller, and operation can be automated with a timer, humidity or CO₂ sensor.

    Why choose this fan?
    High pressure in a compact housing: up to 900 m³/h even in systems with higher resistance, simple installation straight into a D200 duct.

    Technical specifications

    Product type Duct centrifugal fan
    Code 15624
    Power supply 230 V AC, 50 Hz
    Power 135 W
    Current 0.61 A
    Speed 2650 rpm
    Airflow up to 900 m³/h
    Pressure up to 540 Pa
    Noise 55 dB(A)
    Duct diameter Ø200 mm
    Dimensions housing Ø339 mm, length 250 mm
    Motor external rotor, ball bearings
    Impeller backward-curved blades
    Housing plastic, white
    Protection IP44 (motor), IP24 (housing)
    Mounting any position, horizontal or vertical
    Country of origin Turkey

    Main functions

    • High pressure – Up to 540 Pa – overcomes the resistance of filters, dampers and long ducts.
    • Direct installation – Connects straight into a Ø200 mm round duct.
    • Reliable motor – External rotor and ball bearings for long service life.
    • Speed control – Smoothly adjustable with a 230 V speed controller.

    Where is it used?

    • Apartment and house ventilation
    • Bathrooms, kitchens and utility rooms
    • Offices, shops, cafés
    • Supply and extract systems with filters
    • Warehouses and workshops

    Use by need

    For designers.
    Clear airflow, pressure and noise data for the whole series.
    For installers.
    Mounted directly in the duct, terminal box on the outside.
    For businesses.
    Durable motor and continuous maintenance-free operation.

    Practical application

    The stated 900 m³/h is achieved at zero resistance. Connect the fan to the ducts with rubber connectors or clamps so that vibration and noise are not transmitted into the duct system.

    Pros

    • Up to 900 m³/h and 540 Pa
    • Ø200 mm connection
    • Plastic housing
    • Adjustable speed

    Cons / limitations

    • Airflow decreases as system resistance rises
    • Not for explosive atmospheres
    • Not certified for fire smoke extraction

    Safety and installation notes

    • Connection must be made by a qualified specialist
    • Fit overload protection in the supply circuit
    • Mount the fan on a solid base
    • Disconnect power before maintenance
    • Keep inlet and outlet unobstructed

    Quick selection guide

    900 m³/h
    135 W / 230 V
    540 Pa
    55 dB(A)
    Suitable when you need:
    • ventilate residential or commercial premises
    • build a supply or extract system with Ø200 mm ducts
    • overcome the resistance of filters and long ducts
    Check before use:
    • whether 230 V supply is available
    • whether the duct diameter is Ø200 mm
    • whether airflow and pressure suit your system
    Important reminder: A fan works best when its airflow and pressure match the system resistance.

    FAQ

    How to control the speed?
    Use a 230 V thyristor (triac) or autotransformer speed controller sized for the motor current.
    Can it be installed vertically?
    Yes, the fan can operate in any position – horizontal or vertical.
    Is it suitable for fire smoke extraction?
    No, the fan is not certified for this purpose.

    15624 duct fan D200 900 m³/h

    Duct centrifugal fan 15624: D200, up to 900 m³/h, 540 Pa, 135 W, 230 V, plastic housing.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Shut-off damper for round air duct | for ventilation | air handling systems | D100 | silver | galvanized steel | 100USO
    Code: 04963

    Round duct shut-off damper, designed to shut off, restrict, or regulate airflow in round air ducts. The damper is used in supply, exhaust, or recirculation air systems where simple and efficient control of air movement within premises is required.

    Due to its galvanized steel construction, the product is resistant to corrosion, durable, and suitable for use in residential, commercial, and technical ventilation systems. Manual operation allows easy airflow adjustment without the need for an additional electric actuator or automation system. 

    Price 6.50 € VAT incl.
    ( 5.37 € VAT excl. )
    Supply air ventilation damper in wall | with G3 filter | ASA plastic wall outlet | D125 | 1m | white | 12,5TOV1-02
    Code: 09230

    Wall-mounted supply air vent D125 with a 1000 mm insulated duct, G3 filter and adjustable diffuser. Outdoor side – ASA plastic external wall outlet. Intended for controlled air inflow in rooms with forced exhaust.

    Price 30.65 € VAT incl.
    ( 25.33 € VAT excl. )
    Flexible aluminum air duct | for ventilation | ventilation systems | D100mm | 3m | white | LAO100B
    Code: 23033

    Flexible aluminium air duct - a reliable and universal solution for professional and residential ventilation systems. Designed to connect ventilation elements, fans, heat recovery components or other air distribution units.

    Due to its low weight, high flexibility and resistance to high temperatures, the duct ensures quick installation, tightness and long-term operation even in more demanding conditions. The white surface blends aesthetically in technical and visible installation areas. 

    Price 7.20 € VAT incl.
    ( 5.95 € VAT excl. )
    Extractor fan with backdraft shutter | D100 | 230V | 155x155x101mm | IP24 | ABS plastic | white | AU4S
    Code: 13754

    Reliable, quietly operating axial fan designed for domestic spaces that require efficient air extraction. This is a versatile model with an integrated backdraft damper, LED indicator, IP24 protection, and a ball-bearing motor, making it ideal both for professional installers and for everyday users looking to improve air quality in their homes.

    Price 15.90 € VAT incl.
    ( 13.14 € VAT excl. )
    Rotary deflector D100 | ball bearings | stainless steel | silver
    Code: 19471

    Stainless steel rotary deflector (wind turbine) D100 with ball bearings. Fits onto a D100 ventilation duct, extracts air without electricity and protects the duct from rain and snow.

    Price 85.06 € VAT incl.
    ( 70.30 € VAT excl. )
  • Subscribtion to new arrivals

    privacy policy

    Information