Electric footwear / shoe dryer with timer | 220W | 230V | 100x225x865mm | IP20 | black | ADAX ST3D Black

Electric shoe dryer | 4 hoses | for 2 pairs of shoes | 220 W | timer up to 180 min. | black | ADAX ST3D Black

ADAX ST3D Black – black 220 W electric shoe dryer, designed for efficient drying of various types of footwear. Warm air is blown through 4 flexible hoses, allowing up to two pairs of shoes to be dried at the same time.

The flexible hoses direct warm air deep into the footwear and allow it to reach the lower part of the shoes. The integrated digital timer allows an operating time of up to 180 minutes, adjustable in 30-minute intervals. Supplied with a 1.20 m power cable and plug.

ADAX ST3D Black is a wall-mounted shoe dryer that allows four shoes to be dried at the same time. 220 W power, four flexible hoses, a timer of up to 180 minutes and overheating protection provide a practical solution for everyday footwear drying.

Blown air temperature: ambient temperature + 20 °C. The unit also has overheating protection.

Four flexible hoses are intended for four individual shoes. They help direct heated air directly into the footwear and allow up to two pairs to be dried at the same time.

1. Switch on the ST3D using the „+“ control button.
2. The operating time is selected in 30-minute steps.
3. Maximum operating time – 180 minutes.
4. The selected time is shown on the device display.
5. When the selected time has elapsed, the drying cycle ends.

The unit is equipped with overheating protection. When using the dryer, it is important not to cover the air inlet or outlet openings to ensure free airflow.

• Entrance halls.
• Corridors.
• Utility rooms.
• Apartments and private houses.
• For drying work and outdoor footwear.
• For drying sports and children's footwear.

• The dryer must be securely installed in a stable location.
• Leave sufficient space for the four flexible hoses.
• Do not cover the air inlet or outlet openings.
• Keep away from flammable materials.
• Unplug the unit from the power socket before installation or maintenance work.
• Install according to the manufacturer's instructions.

• The air inlet openings must remain unobstructed.
• Do not use the appliance if the power cable or the dryer itself is damaged.
• Disconnect the appliance from the mains before maintenance or removal.
• Keep away from flammable materials.
• Do not use in a location where the unit may be directly exposed to water.
• Use the appliance only for its intended purpose.

ADAX ST3D Black | shoe dryer | 220 W | 4 hoses | for 2 pairs | timer up to 180 min.

ADAX ST3D Black – black 220 W electric shoe dryer with four flexible hoses, designed to dry up to two pairs of footwear at the same time. The timer can be adjusted up to 180 min., while the blown air temperature is ambient temperature +20 °C. Dimensions 100 × 225 × 865 mm, IP20, overheating protection, 1.20 m power cable with plug and 2-year warranty.