Electrical cable puller | pulling system | 4-6mm

Wire and cable pulling system – for 4-6 mm fish tape, 25 kg pulling capacity, aluminium alloy

Wire and cable pulling system is designed for more convenient routing of wires through conduits, corrugated pipes, wall cavities and other cable installation routes. The device is used with a 4-6 mm diameter fish tape and helps guide the tape through conduit bends, including bends of up to 90°. The construction is made of aluminium alloy, and the specified maximum pulling capacity is up to 25 kg.

• Fish tape guidance – for more convenient insertion of the tape into conduits and ducts.
• Works with 4-6 mm tape – suitable for commonly used fish tape diameters.
• Up to 25 kg pulling capacity – for pulling cables and wire groups without exceeding the permitted load.
• Passing 90° bends – helps guide the tape through conduit elbows and other bends.
• Aluminium alloy construction – for stronger and longer-lasting use.
• Unlimited tape length – can be used with a selected length of 4-6 mm fish tape.
• Mobile tool – convenient for installers working on different sites.

• Electrical installation – for routing wires through conduits, corrugated pipes and cable ducts.
• Construction and renovation work – for feeding cables through wall cavities, floor structures and technical ducts.
• Commercial buildings – offices, shops, warehouses and technical rooms.
• Industrial premises – cable routes, equipment connection and maintenance work.
• Communication and signal system installation – for data, security, control and low-current cables.
• Residential buildings – for routing electrical, internet, alarm and other wires.

For example, when installing a cable through a plastic or metal installation conduit, a 4-6 mm fish tape is inserted into the system. It is guided through the conduit to the other exit point, even if there are several bends in the route.

When the tape reaches the other end of the conduit, a cable or group of wires is attached to it. When pulling the cable, it is recommended to work smoothly, not exceed the 25 kg pulling capacity, and evaluate the cable cross-section, insulation and conduit fill level.

For an electrician: a practical tool for inserting fish tape into installation conduits, corrugated pipes or cable ducts, especially when the route has bends.

For a low-current system installer: suitable for routing internet, alarm, video surveillance, control and other communication cables through walls and technical ducts.

For a construction contractor: helps prepare cable routes faster in new-build or renovation projects.

For a maintenance specialist: a convenient solution when adding cables in existing installations where existing conduits or ducts must be used.

Wire and cable pulling must be performed carefully, taking into account the cable weight, route length, conduit fill and number of bends. Excessive pulling force may damage the cable insulation, connection or fish tape.

• Use only 4-6 mm diameter fish tape.
• Do not exceed the specified 25 kg pulling capacity.
• Check the conduit before work – make sure it is not compressed, blocked or damaged.
• Pull the cable smoothly and without sudden jerks.
• Use suitable fixing elements so the cable holds securely to the fish tape.
• If friction is higher, cable pulling lubricant may be used, provided it is compatible with the cable insulation and installation conditions.
• Work on live electrical installations must be performed by qualified specialists.

Quick selection guide

Choose the wire and cable pulling system for 4-6 mm tape when you need to guide fish tape through installation conduits, cable ducts or wall cavities and then pull a cable or group of wires through it.

More convenient wire routing through conduits and cable ducts

The wire and cable pulling system for 4-6 mm tape is a practical installation tool for electricians, low-current system installers, contractors and maintenance specialists performing cable routing work through conduits, ducts and wall cavities.

Thanks to the aluminium alloy construction, pulling capacity of up to 25 kg, ability to work with unlimited-length 4-6 mm fish tape and assistance in passing bends of up to 90°, the system helps organise cable routing work more efficiently. Fish tape is not included in the package.