Products catalog

Home/Product Catalog/Automation and Control Systems/Control components for automation and control systems/Buttons for automation control | control systems
  • New item   Flush push button | 22 mm | 1NO | green | metal | non-illuminated | IP40 | non-latching | Promfactor Baltic | FP PCP gr

    Flush push button | 22 mm | 1NO | green | metal | non-illuminated | IP40 | non-latching | Promfactor Baltic | FP PCP gr

    Code: FP PCP gr
    Barcode: 4779040154825
    Inquire about this item
    Price 2.41 € VAT incl.
    ( 1.99 € VAT excl. )

    Flush push button Ø 22 mm, 1NO, green, IP40, Promfactor Baltic FP PCP gr. For control circuits: AC-15 6 A / DC-13 0.6 A, Ui 660 V.

  • Product description

    Flush push button | 22 mm | 1NO | green | metal | non-illuminated | IP40 | non-latching | Promfactor Baltic | FP PCP gr

    FP PCP gr is a green flush metal push button switch from the Promfactor Baltic FP series, with 1NO contact. It is mounted in a Ø 22 mm hole in a panel door, control desk or push button enclosure; front protection degree IP40.

    Key idea:
    According to EN 60204-1, green is suitable for starting and switching on (START / ON), so the operator instantly recognises where work begins. The NO contact closes the circuit only when pressed, so the button sends a start or control command.
    Contact
    1NO
    Button type
    flush, non-latching
    Mounting
    Ø 22 mm hole
    Illumination
    none
    Degree of protection
    IP40 front
    Colour
    green

    How it works

    The button is inserted into a Ø 22 mm hole and tightened from the rear with a nut. The contact block is connected with screw terminals, tightening torque 0.8 Nm.

    At rest the NO contact is open; when pressed it closes the circuit, and when released the button returns to its initial position (non-latching). For starting it is connected in parallel with the contactor auxiliary contact 13–14 so that the motor keeps running after the button is released.

    The button controls only the control circuit: a contactor coil, a relay or a controller input. Motor current is switched by a contactor, not by the button.

    Why choose FP PCP gr? The flush metal actuator protects against accidental pressing, and the metal ring withstands intensive use in workshops and production.

    Technical specifications

    Product type Flush push button, non-latching
    Manufacturer / code Promfactor Baltic / FP PCP gr
    EAN 4779040154825
    Series FP (22 mm control push buttons)
    Housing metal
    Colour green
    Contact 1NO
    Illumination none
    Standard IEC/EN 60947-5
    Utilization category AC-15 / DC-13
    Rated voltage Ue up to 380 V AC / 220 V DC
    Rated current 6 A (AC) / 0.6 A (DC)
    Insulation voltage Ui 660 V
    Frequency 50/60 Hz
    Mechanical life 1,000,000 cycles
    Degree of protection IP40 on the operating side
    Mounting hole Ø 22 mm
    Terminal tightening torque 0.8 Nm
    Operating temperature -25…+45 °C
    Storage temperature -25…+55 °C
    Warranty 24 months from start of use (max. 30 months from sale)

    Main functions

    • 1NO contact – closes the control circuit when pressed
    • Spring return – returns to the initial position when released
    • Ø 22 mm mounting – fits standard panel holes and push button enclosures
    • Screw terminals – reliable wire connection, 0.8 Nm

    Where is it used?

    • Control panels for pumps, fans and compressors
    • Motor START–STOP control with a contactor
    • Commands in automation panels and PLC inputs
    • Push button enclosures at machines and control desks

    Use by need

    For the installing electrician. A standard 22 mm hole, screw terminals and clear contact marking allow quick installation and replacement of an old button.
    For automation panel builders. Buttons, lamps and START–STOP units from one series allow a panel with a uniform look.
    For equipment maintenance. A frequently replaced component worth keeping in stock by colour and contact.

    Practical use

    On a workshop machine control desk the metal button starts the machine or switches the mode, and the flush actuator prevents accidental pressing, e.g. when leaning with an elbow.
    Pros
    • Metal ring – sturdy and durable
    • Flush actuator – fewer accidental presses
    • Standard Ø 22 mm hole
    • Ui 660 V, AC-15 / DC-13
    Cons
    • IP40 – not suitable outdoors or in washdown areas without an extra cover
    • No illumination – a lamp is needed to show the status
    • Not intended for switching motor current directly

    Safety and installation notes

    • Installation and connection must be performed by a qualified electrician after disconnecting the voltage and verifying that there is none.
    • Protect the control circuit with a separate circuit breaker or fuse according to the wire cross-section.
    • Use an NC contact for the STOP function and a spring-return NO with contactor self-holding for START.
    • Metal doors with equipment must be connected to PE.
    Quick selection guide
    Ø 22 mm1NOgreennon-illuminatedIP40non-latchingAC-15 / DC-13

    FAQ

    ⚡ Does FP PCP gr have illumination?
    No, this button is non-illuminated. If you need to show the status, choose the FP PCPI series with LED or a separate indicator lamp.
    ⚡ What contact does it have?
    One 1NO contact: the circuit closes when pressed.
    ⚡ What hole size is needed?
    A standard Ø 22 mm hole in a panel door, control desk or push button enclosure.
    ⚡ Does the button latch?
    No, the button is spring return – it returns to its initial position when released.
    ⚡ What current can it switch?
    According to the manufacturer, the rated current is 6 A (AC-15) and 0.6 A (DC-13). The button is intended for control circuits; the motor is connected via a contactor.

    Flush push button | 22 mm | 1NO | green | metal | non-illuminated | IP40 | non-latching | Promfactor Baltic | FP PCP gr

    FP PCP gr is a reliable Promfactor Baltic FP series 1NO push button for a Ø 22 mm hole. Suitable for panels, control desks and push button enclosures in dry rooms. Need help selecting buttons for a whole panel? Send us the diagram – we will select the components and send a quote.

    Published: 2026-11-05 · Data verified against the manufacturer datasheet: 2026-11-05

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.

  • Alternative products

    Crane control panel | with 4 buttons | 5A | 120–400V | IP54 Top seller  
    Crane control panel | with 4 buttons | 5A | 120–400V | IP54
    Code: BPU10-4

    Button control panels are designed for switching electrical control circuits of lifting mechanisms. The sealed IP54 enclosure is made of heat-resistant ABS plastic with built-in buttons. A protective gland is provided to seal the cable entry, and a sealing gasket is installed between the enclosure and the panel.

    The buttons meet the "CE" standard requirements in terms of design and technical specifications.

    The remote control panels have passed certification tests and have received serial production conformity certificates.
    Available with 2, 4, or 6 buttons.
    The housing is made of non-flammable ABS plastic.
    The cable entry includes a protective gland that prevents moisture and dust from entering the housing. 

    Price 20.57 € VAT incl.
    ( 17.00 € VAT excl. )
    Add to cart 

  • Subscribtion to new arrivals

    privacy policy

    Information