Products catalog

Home/Product Catalog/HVAC control solutions for heating and ventilation/Fans for ventilation systems/Industrial Fans for Ventilation Systems/Wall-mounted | window fans for ventilation systems
  • New item   Industrial axial wall fan | 0.9 kW | 3×380 V | 950 rpm | 10000–15500 m³/h | aluminium alloy | IP66 | 870×870 mm
    New item   Industrial axial wall fan | 0.9 kW | 3×380 V | 950 rpm | 10000–15500 m³/h | aluminium alloy | IP66 | 870×870 mm 1

    Industrial axial wall fan | 0.9 kW | 3×380 V | 950 rpm | 10000–15500 m³/h | aluminium alloy | IP66 | 870×870 mm

    Code: ES-CFM091015
    Inquire about this item
    Price 988.33 € VAT incl.
    ( 816.80 € VAT excl. )
    Want another price? Suggest yours!

    Industrial axial wall fan 0.9 kW, 3×380 V, 950 rpm, 10000–15500 m³/h, 60–150 Pa, IP66, aluminium alloy housing and blades. For production halls, warehouses, farms and greenhouses.

  • Product description

    Industrial axial wall fan | 0.9 kW | 3×380 V | 950 rpm | 10000–15500 m³/h | aluminium alloy | IP66

    Industrial axial wall fan with a 0.9 kW three-phase 380 V motor and aluminium alloy housing and blades. It delivers 10000–15500 m³/h at 60–150 Pa static pressure, and IP66 protection allows use in dusty and wet industrial environments.

    Key point:
    A high-capacity solution for production halls, warehouses, farms and greenhouses where tens of thousands of cubic metres of air per hour must be moved. The three-phase motor speed is best controlled with a frequency inverter.
    Airflow
    10000–15500 m³/h
    Power / voltage
    0.9 kW / 3×380 V
    Speed
    950 rpm
    Protection
    IP66

    We will help you set up speed and automatic control

    We will advise how to adjust this fan's speed and how to switch or control it automatically according to room conditions – humidity, temperature or CO₂ concentration. We will select a suitable speed controller, thermostat, humidity or CO₂ sensor and explain how to connect them.

    Contact us: tel. +370 658 01033 or e-mail info@elsprendimai.eu

    In your e-mail, briefly describe the situation: room purpose and size, fan model and what you want to control – speed, humidity, temperature or CO₂.

    Wholesale quantities: special prices for larger orders. State the required quantity in your e-mail and we will send you an individual offer.

    Operating principle

    The fan is installed in a prepared opening in a wall or partition. The three-phase 380 V, 50 Hz motor drives the aluminium alloy blades at 950 rpm and moves air along its axis.

    Operating at 60–150 Pa static pressure, the fan delivers 10000–15500 m³/h – the lower value corresponds to higher resistance, the higher value to free discharge. Housing and blades are electrophoretically coated, and IP66 protects against dust and powerful water jets.

    Why the 0.9 kW fan?
    High airflow with a reliable three-phase motor and corrosion-resistant aluminium construction – industrial ventilation and cooling without complex ductwork.

    Technical specifications

    Product type Industrial axial wall fan
    Code ES-CFM091015
    Power 0.9 kW
    Power supply 3-phase, 380 V, 50 Hz
    Airflow 10000–15500 m³/h
    Static pressure 60–150 Pa
    Speed 950 rpm
    Bearings Hydraulic
    Blades Aluminium alloy, electrophoretic coating
    Housing Aluminium alloy, electrophoretic coating
    Protection rating IP66
    Mounting dimensions 870×870 mm
    Overall dimensions 920×920×336 mm

    Main functions

    • High airflow – 10000–15500 m³/h for large industrial volumes.
    • IP66 protection – suitable for dusty and wet environments, washable.
    • Aluminium construction – light and corrosion-resistant.
    • Three-phase motor – reliable long-term industrial operation.
    • Inverter speed control – airflow can be matched to demand to save energy.

    Where is it used?

    • Production halls and warehouses
    • Farms and livestock buildings
    • Greenhouses
    • Workshops and logistics centres
    • Process heat removal
    • Large commercial premises

    Use by need

    For farmers.
    High airflow for barns and greenhouses, resistant to moisture and dust.
    For manufacturers.
    Efficient removal of heat and polluted air from halls.
    For designers.
    Clear parameters: 0.9 kW, 380 V, 10000–15500 m³/h, 60–150 Pa, IP66.

    Practical application

    If a 4000 m³ hall overheats in summer, two 0.9 kW fans installed as exhaust on the end wall can remove up to 31000 m³ of air per hour. With a frequency inverter and temperature sensor, output is increased only when the temperature rises.

    Pros

    • 10000–15500 m³/h airflow
    • IP66 protection
    • Corrosion-resistant aluminium construction
    • Three-phase industrial motor
    • Can be controlled with a frequency inverter

    Cons / limitations

    • Requires a three-phase 380 V supply
    • No built-in speed control – frequency inverter recommended
    • May need an additional mounting frame, louvres or guard
    • Not suitable for small rooms

    Safety and installation notes

    • Installation and connection must be done by a qualified electrician.
    • Protect the motor with a circuit breaker or motor protection.
    • Check the direction of rotation – swap two phases if needed.
    • Fix to a solid structure to avoid vibration.
    • Install with a protective guard in accessible locations.
    • Before maintenance disconnect power and wait until the blades stop.

    Quick selection guide

    0.9 kW
    3×380 V
    10000–15500 m³/h
    IP66
    Suitable when you need:
    • to ventilate a large hall, warehouse or farm
    • to remove process heat
    • a fan for wet and dusty environments
    Check before use:
    • that a three-phase 380 V supply is available
    • that an opening and mounting can be made in the wall
    • that an air inlet is provided
    • how the speed will be controlled
    Important reminder: a three-phase fan’s speed is most efficiently controlled with a frequency inverter – we will help you choose one.

    FAQ

    What voltage is required?
    Three-phase 380 V, 50 Hz.
    What is the airflow?
    10000–15500 m³/h depending on resistance.
    Can the speed be adjusted?
    Yes, with a frequency inverter – we will help you choose one.
    Is it suitable for wet environments?
    Yes, protection rating IP66.
    What is it made of?
    Housing and blades – aluminium alloy with electrophoretic coating.
    What is its speed?
    950 rpm.

    Industrial axial fan 0.9 kW | 10000–15500 m³/h | IP66

    Industrial axial wall fan 0.9 kW, 3×380 V, 950 rpm, 10000–15500 m³/h, 60–150 Pa, IP66, aluminium alloy housing and blades. For production halls, warehouses, farms and greenhouses.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.

  • Subscribtion to new arrivals

    privacy policy

    Information