Industrial Dehumidifier | Moisture Collector | 800W | 230V | 60L/24h | 550m³/h | 395x365x695mm | White

Industrial low-temperature dehumidifier – up to 60 l/day, 550 m³/h, 800 W, 230 V, –5…+38 °C

Mobile industrial low-temperature dehumidifier is designed to reduce excess humidity in refrigerated, cool and other low-temperature indoor spaces. The maximum stated dehumidification capacity is 60 litres per dayat an ambient temperature of 30 °C and a relative humidity of 90%.

The unit is designed to operate at temperatures from –5 to +38 °C and features automatic defrosting, intelligent humidity control, an LED touch display, a 24-hour timer, an integrated water tank and a connection for continuous condensate drainage.

The U-shaped turbine air duct and airflow of up to 550 m³/h help circulate air quickly throughout the room, while the castors allow the dehumidifier to be moved conveniently between work areas.

• monitoring the current relative humidity;
• setting the desired humidity level;
• automatic start and stop of dehumidification;
• LED touch control display;
• automatic defrost control;
• 24-hour timer;
• full water tank detection and automatic shut-off.

• Dehumidification capacity up to 60 l/day – at 30 °C and 90% RH.
• Operation from –5 °C – for cool and low-temperature rooms.
• Automatic defrosting – to protect the heat exchanger.
• 550 m³/h airflow – for a larger room volume.
• U-shaped turbine air duct – for faster air circulation.
• 10–90% RH setting range.
• Automatic humidity maintenance.
• LED touch display.
• 24-hour switch-on and switch-off timer.
• Noise level below 55 dB.
• Water tank and continuous drainage option.
• Automatic shut-off when the tank is full.
• Durable metal housing.
• Castors – for convenient movement.

• In refrigerated warehouses – to reduce condensation and excess humidity.
• In fruit and vegetable storage rooms – to maintain controlled humidity.
• In food warehouses – to improve storage conditions.
• In cool basements – to reduce condensation and the risk of mould.
• In unheated warehouses – where the temperature does not fall below –5 °C.
• Near cold rooms – to control the resulting moisture.
• In production areas – to reduce process-related humidity.
• In technical rooms – to protect equipment against condensation.
• In archives and warehouses – to protect paper, packaging and goods.
• In workshops and garages – to reduce the risk of corrosion.

1. Position the unit upright. Use a level, firm and stable surface.
2. Leave enough space for air circulation. Do not obstruct the air inlet or outlet.
3. Check the water tank. It must be inserted correctly into the unit.
4. Choose the condensate removal method. Use the integrated tank or connect a drain hose.
5. Connect the unit to a 230 V mains supply. Use an earthed socket suitable for the required load.
6. Set the desired humidity on the touch display. Choose an RH value suitable for the intended use of the room.
7. Set the timer if required. Delayed switch-on or switch-off can be selected.
8. Monitor the operating status. Check the humidity readings, tank status and automatic defrost mode.
9. Carry out regular maintenance. Clean the air openings and water tank and inspect the drain hose.

• Use only with a 230 V AC, 50 Hz mains supply.
• The unit must be connected to an earthed socket.
• Do not use at temperatures below –5 °C or above +38 °C.
• Do not use outdoors or in locations exposed to rainunless an appropriate IP protection rating is specified.
• Do not obstruct the air inlet or outlet.
• Do not move the unit while the compressor is operating.
• Disconnect the unit from the mains before cleaning.
• Do not allow water to reach electrical components.
• Do not bend or pinch the drain hose.
• Do not dismantle the compressor or refrigeration system.
• Repairs must be carried out by a qualified specialist.

• Check the air inlets regularly and remove accumulated dust.
• Empty and clean the water tankto prevent odours.
• Check the drain hose – it must not be blocked or kinked.
• Clean the housing with a soft, slightly damp cloth.
• Do not use aggressive cleaning agents, petrol or solvents.
• Listen for changes in the sound of the compressor and fan. Unusual noise may indicate a fault.
• If the unit will not be used for a long period, store it upright in a clean and dry place.

Industrial low-temperature dehumidifier for cool rooms

The unit is designed to reduce humidity in refrigerated warehouses, fruit and vegetable storage rooms, basements, technical areas and other locations where the temperature may fall to –5 °C.

A dehumidification capacity of up to 60 l/day, airflow of 550 m³/h and a U-shaped turbine air duct help circulate air quickly and control excess humidity.

Intelligent humidity control automatically starts or stops dehumidification, while the automatic defrost function helps maintain operation at low temperatures.

The LED touch display, 24-hour timer, water tank, continuous drainage option and castors simplify everyday use.

The maximum capacity of 60 l/day is achieved only at 30 °C and 90% RH. When selecting a dehumidifier for a specific room, its volume, temperature, initial humidity, air exchange and continuous moisture sources must be considered.