Industrial protective DC circuit breaker for solar modules 2P | 100A | 1000VDC | 50kA

Industrial protective DC circuit breaker for solar modules – 2P, 100A, 1000VDC, 50kA

Industrial DC MCCB circuit breaker – a high-grade protective direct current circuit breaker designed for solar photovoltaic systems, energy storage solutions, wind turbines, hydropower and other low-voltage DC circuits. The device provides reliable protection against overload and short circuit in systems up to 1000VDC.

• Reliable disconnection in case of short circuit – helps protect the DC circuit from dangerous faults.
• Overload protection – reduces the risk of overheating of cables, equipment and components.
• Suitable for solar energy systems – can be used in PV circuits and DC distribution systems.
• Can be used as the main DC disconnect switch – suitable for systems where the direct current circuit must be safely disconnected.
• High breaking capacity – up to 50kA Icu, designed for systems requiring a higher safety level.
• Stable operation under difficult conditions – operating temperature from -20°C to +60°C.

• Solar photovoltaic systems – for PV module, inverter and DC distribution circuits.
• Rooftop solar power plants – for higher-power private and commercial installations.
• Energy storage systems – for battery, battery cabinet and DC storage circuits.
• Wind turbine systems – for DC circuit protection and disconnection.
• Hydropower DC lines – for low-voltage direct current distribution.
• Electric vehicle charging stations – for DC protection and distribution circuits.
• Train and railway electrical systems – for specialized DC distribution systems.
• Industrial low-voltage DC networks – in production, energy and automation facilities.

For solar power plant owners: suitable as reliable DC circuit protection in a solar power plant, where it is necessary to protect the inverter, cables, modules and other system components from dangerous faults.

For companies and industry: used in higher-power DC energy distribution systems, battery farms, EV charging infrastructure and renewable energy facilities.

For designers / engineers: a suitable choice for systems requiring high 50kA breaking capacity, DC 1000V operating voltage and compliance with IEC/EN 60947-2 standard.

For electricians: a clear and reliable DC protection component that can be integrated into distribution panels, PV systems or battery cabinets according to project requirements.

In practice, this circuit breaker can be used between the solar module string and the inverter, in a battery cabinet, DC distribution box or another part of a direct current circuit where protection against short circuit and overload is required.

High breaking capacity allows it to be used in more complex systems where short-circuit currents may be high and safe disconnection is critically important for equipment and personnel safety.

The DC circuit breaker must be selected and installed according to the project of the solar power plant, battery system or other DC circuit. It is important to evaluate system voltage, current, possible short-circuit current and the wiring diagram provided by the manufacturer.

• Use only in DC systems, not in AC networks.
• Do not exceed the rated voltage of 1000VDC.
• Do not exceed the rated current of 100A.
• Follow the specified polarity and wiring diagram.
• Installation must be performed by a qualified specialist.
• Select according to short-circuit current and the design parameters of the specific system.
• Using unsuitable AC breakers in DC circuits is dangerous.

Quick selection guide

Choose the industrial DC circuit breaker 2P 100A 1000VDC 50kA when high breaking capacity and reliable protection are required in solar, battery or other direct current systems.

Industrial DC circuit breaker for solar, battery and renewable energy systems

The industrial protective direct current circuit breaker 2P 100A 1000VDC 50kA is a reliable, certified solution for solar, wind, battery, hydropower and other DC energy distribution systems where a high level of safety is required.

With high 50kA breaking capacity, 1000VDC operating voltage, 100A rated current, overload and short-circuit protection and compliance with IEC/EN 60947-2 standard, this breaker is suitable for both industrial and advanced private DC energy solutions.