Products catalog

  • Industrial ultrasonic air humidifier | 3 kg/h | 30–60 m² | ESCHZ-CZ3K

    Code: ESCHZ-CZ3K

    Industrial ultrasonic air humidifier, output 3 kg/h, recommended for 30–60 m² rooms.

  • Industrial ultrasonic air humidifier | 3 kg/h | 30–60 m² | ESCHZ-CZ3K

    Industrial ultrasonic air humidifier with an output of 3 kg/h, designed for greenhouses, mushroom farms, warehouses, print shops and production halls. Ultrasound turns water into a fine mist that evaporates quickly in the air.

    Key point:
    Industrial output allows one unit to maintain humidity in a larger room. Correct humidity reduces material drying and static electricity and improves growing conditions for plants and mushrooms.
    Output
    3 kg/h
    Supply
    220 V AC, 50 Hz
    Area
    30–60 m²
    Control
    manual

    Operating principle

    An ultrasonic transducer vibrates the water at high frequency and breaks it into fine droplets, which the airflow carries into the room through the 1 × Ø110 mm mist outlet – a mist distribution duct can be connected to it.

    The unit runs in the set mode – a separate hygrostat or humidity sensor is recommended for humidity control.

    Confirm the water supply method according to site conditions before installation.

    Why choose ESCHZ-CZ3K?
    A specific output of 3 kg/h and a clear application area of 30–60 m²: it is easy to calculate how many units a site needs.

    Technical specifications

    Product type Industrial ultrasonic air humidifier
    Code ESCHZ-CZ3K
    Model Chuangzhan CZ-3K
    Humidification output 3 kg/h
    Supply voltage 220 V AC, 50 Hz
    Nozzles / plates 7 pcs
    Mist outlet 1 × Ø110 mm
    Control manual
    Recommended area 30–60 m²
    Mist droplet size 1–10 µm
    Operating temperature +3 … +40 °C
    Dimensions 680 × 410 × 460 mm
    Weight 18 kg

    Main functions

    • Ultrasonic mist – fine droplets (1–10 µm) evaporate quickly.
    • Output 3 kg/h – sufficient for a 30–60 m² room.
    • Simple control – can be combined with an external hygrostat.

    Where is it used?

    • Greenhouses and nurseries
    • Mushroom growing rooms
    • Warehouses (wood, paper, textiles)
    • Print shops and packaging halls
    • Production halls where static electricity must be reduced
    • Woodworking workshops

    Use by need

    For greenhouses or mushroom farms.
    Stable humidity improves growing conditions for plants and mycelium.
    For warehouse or production managers.
    Less material drying and fewer static discharges.
    For print shops or furniture production.
    Paper and wood deform less.

    Practical use

    If the relative humidity in a 60 m² greenhouse or warehouse drops to 20–30 % during the heating season, a 3 kg/h humidifier combined with a hygrostat helps bring it back to the required level.

    Pros

    • Output 3 kg/h
    • Fine, quickly evaporating mist
    • Simple control
    • Ultrasound does not heat water – lower consumption than steam humidification

    Cons / limitations

    • Softened or demineralised water is required – otherwise white mineral dust settles
    • No automatic humidity control – a hygrostat is needed
    • The water supply solution must be planned in advance
    • Ingress protection (IP) not specified – for indoor use

    Safety and installation notes

    • Connect to an earthed socket matching the 220 V AC, 50 Hz supply.
    • Do not direct mist or humid airflow at electrical equipment, panels or luminaires.
    • Disconnect from the mains before cleaning or refilling.
    • Clean the water tank regularly to prevent bacterial growth.
    • Do not keep relative humidity above 60–65 % for long periods – condensation and mould may form.

    Quick selection guide

    3 kg/h
    220 V AC, 50 Hz
    30–60 m²
    manual
    Suitable when you need to:
    • increase relative humidity in a 30–60 m² room;
    • maintain stable growing or storage conditions;
    • use a simple, reliable unit.
    Check before use:
    • room volume and air change rate;
    • water hardness;
    • supply voltage (220 V AC, 50 Hz).
    Important reminder: a humidifier does not replace ventilation or reduce CO₂, and excessive humidity promotes condensation and mould.

    FAQ

    What room size is it suitable for?
    Recommended for 30–60 m² rooms, depending on the air change rate and target humidity.
    Can tap water be used?
    Yes, but hard water leaves white mineral dust – softened water is recommended.
    Does it maintain humidity automatically?
    No, a hygrostat is needed to maintain humidity.
    How is water supplied?
    Please confirm when ordering – depends on the configuration.
    What are the power and supply?
    220 V AC, 50 Hz.
    Can it be used outdoors?
    No, the unit is intended for indoor use.

    Industrial ultrasonic air humidifier | 3 kg/h | 30–60 m² | ESCHZ-CZ3K

    Industrial ultrasonic air humidifier 3 kg/h, for 30–60 m² rooms – for greenhouses, mushroom farms, warehouses, print shops and production halls.

    Published: 2026-11-12 · Data based on supplier specification: 2026-11-12

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Subscribtion to new arrivals

    privacy policy

    Information