Products catalog

Home/Product Catalog/Electrical distribution and installation/Electrical Energy Supply | Distribution Panels | Boxes | Accessories/Special electrical panels for garages | panels designed for commercial premises/Industrial modular electrical distribution boards | panels | enclosures with socket outlets
  • New item   Industrial socket panel with plug outlets | 2x16A 5P + 1x230V SCHUKO | with a package switch | 7 modules | IP44 | for garages and workshops | SEZ ROS 7/x-11

    Industrial socket panel with plug outlets | 2x16A 5P + 1x230V SCHUKO | with a package switch | 7 modules | IP44 | for garages and workshops | SEZ ROS 7/x-11

    Code: SKU#ROS7/x-11-2x16A+1x230V
    Inquire about this item
    Price 63.00 € VAT incl.
    ( 52.07 € VAT excl. )
    Want another price? Suggest yours!

    The SEZ ROS 7/x-11 is a ready-to-use industrial socket panel with two three-phase 16A 5P outlets (CEE/IEC 60309), one 230V SCHUKO outlet, a main package isolator switch, and space for 7 modules of protective devices. It is wall-mounted in a garage, workshop, warehouse or production room where a reliable three-phase and single-phase power supply point is needed for tools and equipment.

  • Product description

    Industrial socket panel with plug outlets | 2x16A 5P + 1x230V SCHUKO | with a package switch | 7 modules | IP44 | for garages and workshops | SEZ ROS 7/x-11

    The SEZ ROS 7/x-11 is a ready-to-use industrial socket panel with two three-phase 16A 5P outlets (CEE/IEC 60309), one 230V SCHUKO outlet, a main package isolator switch, and space for 7 modules of protective devices. It is wall-mounted in a garage, workshop, warehouse or production room where a reliable three-phase and single-phase power supply point is needed for tools and equipment.

    Key idea:
    Instead of separately installed sockets, enclosures and breakers, this is one housing with everything needed for a three-phase connection point. The electrician wires up the supply and fits the breakers, and the user gets a clearly labelled, sealed, switchable power point.
    Three-phase outlets
    2 x 16A 5P 400V
    Single-phase outlet
    1 x SCHUKO 16A 250V
    Space for protection
    7 modules (DIN)
    Protection rating
    IP44

    How it works

    The panel is wall-mounted, and the supply cable (5-core, up to 16–25 mm²) is connected to the terminals of the package switch. From the switch, power runs through miniature circuit breakers mounted on a DIN rail and, if required, a residual current device (RCD) – selected by the installer according to the site.

    From the protective devices, power is distributed to the two 5-pole 16A outlets and the SCHUKO outlet. The package switch lets you disconnect the whole panel with a single motion – handy when disconnecting tools after finishing work or before servicing the outlets. The IP44 housing, with covers over the outlets, protects against splashes and dust.

    What makes the ROS 7/x-11 worthwhile?
    It saves time and space: one mounting point, one supply connection, all outlets with their own protection. It suits both permanent connection in a garage or workshop and temporary hook-ups on construction sites.

    Technical specifications

    Manufacturer SEZ (Slovakia)
    Model ROS 7/x-11
    Product type Industrial socket panel with an isolator switch
    Three-phase outlets 2 x IEC 60309 (CEE) 16A 5P 400V, 6h
    Single-phase outlet 1 x SCHUKO 16A 250V
    Incoming switch Package isolator switch, 0–1
    Module space 7-module (17.5 mm) DIN rail
    Protective devices Not included in the kit (selected per project)
    Protection rating IP44
    Housing material Impact-resistant plastic
    Rated voltage 230/400 V, 50 Hz
    Mounting Surface-mounted, on a wall
    Cable entry Through a gland / knockout holes

    Key features

    • Two three-phase outlets – you can power a compressor and a welding machine or a machine tool at the same time.
    • SCHUKO outlet – for single-phase tools and lighting, with no separate enclosure needed.
    • Package isolator switch – disconnects all outlets in one motion, with a visible switch position.
    • 7 modules for protection – fits a 3P breaker, a 1P breaker and a 4P residual current device.
    • IP44 housing – suits damp garages, wash bays, outdoor shelters.
    • Ready for assembly – internal wiring to the outlets is already in place; the installer only connects the supply and the protective devices.

    Where is it used?

    • Garages and private workshops with three-phase tools
    • Car repair shops, wash bays, tyre-fitting centres
    • Warehouses and logistics premises – for forklift chargers, packaging equipment
    • Production halls – mobile machine tools, compressors
    • Construction sites and temporary connections
    • Farms – grain augers, saws, pumps
    • Commercial premises, kitchens with three-phase equipment
    • Event and trade-fair power points

    Use by need

    For the domestic user.
    For a garage with a compressor and a welding machine – one panel instead of three enclosures, with the ability to switch everything off on the way out.
    For businesses and industry.
    A standard connection point at every work station: the same kit, clear labelling, easy servicing.
    For electricians.
    A factory-built housing with pre-wired outlets cuts installation down to connecting the supply and fitting the protective devices; 7 modules let you configure the panel to the project.

    Practical example

    If a workshop needs to power a 400V compressor and a 230V grinder from the same spot, the ROS 7/x-11 fitted with a 3P C16 breaker, a 1P B16 breaker and a 30 mA RCD gives you a fully protected work station. When the job is done, the package switch disconnects everything with one turn.

    Pros

    • Everything in one place – outlets, isolator switch and space for protection in one housing.
    • Fast installation – internal wiring is done at the factory.
    • Flexible configuration – protective devices selected per site.
    • Safe disconnection – visible isolator switch position.
    • IP44 – suits damp premises.
    • European manufacturer – SEZ, compliant with EN standards.

    Cons / limitations

    • Protective devices (breakers, RCD) are not included – purchased separately.
    • IP44 – not for outdoor use without shelter; outlets with open covers are not sealed.
    • Three-phase outlets rated at 16A only – 32A equipment needs a different model (ROS series with 32A).
    • 7 modules limit how many protective devices fit – a separate RCD for each outlet won't fit.

    Safety and installation notes

    • Installation must be carried out only by a qualified electrician; the supply is connected with the power disconnected.
    • A residual current device rated ≤30 mA is required – the outlets are intended for portable tools.
    • The main breaker at the head of the panel must match the rating of the package switch and the supply cable.
    • Check the phase sequence at the outlets – rotation direction matters for three-phase motors.
    • Mount at a height of 1.0–1.5 m so plugs aren't damaged and the outlets remain easily accessible.

    Quick selection guide

    Three-phase outlets
    2 x 16A 5P 400V
    Single-phase outlet
    1 x SCHUKO 16A 250V
    Space for protection
    7 modules (DIN)
    Protection rating
    IP44
    Suitable when you need:
    • two 16A three-phase outlets and one SCHUKO outlet in a single location;
    • the ability to disconnect the whole point with one switch;
    • a housing with space for protective devices, without a separate distribution board.
    Check before use:
    • whether the equipment's current draw stays within 16A per outlet;
    • whether you have suitable breakers and an RCD (7 modules);
    • whether the supply cable cross-section matches the load;
    • whether the installation site is sheltered (IP44).
    Important reminder:
    Without protective devices fitted, the panel is just a housing with outlets – it must not be connected to the mains without breakers and an RCD.

    FAQ

    Are breakers included in the kit?
    No, they are selected and installed according to the project.
    Can it be used outdoors?
    Only under shelter – protection rating IP44.
    What supply cable is needed?
    5-core, typically 5x2.5 mm² or 5x4 mm², depending on load and distance.
    Can two three-phase devices be connected at the same time?
    Yes, as long as the combined current stays within the rating of the main breaker.
    Does the package switch also disconnect the SCHUKO outlet?
    Yes, it disconnects the entire panel.

    Industrial socket panel with plug outlets | 2x16A 5P + 1x230V SCHUKO

    The SEZ ROS 7/x-11 is an industrial socket panel with 2x16A 5P, 1xSCHUKO 230V, a package isolator switch and 7-module space for protective devices, IP44. A ready-made three-phase power point for garages, workshops, warehouses and production premises.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • privacy policy

    Information