Industrial Ultrasonic Air Humidifier | 300W | 230V | 3kg/h | 680x320x470mm | White

Industrial ultrasonic air humidifier – 3 kg/h, 300 W, 230 V, automatic humidity control, Ø110 mm mist outlet

Mobile industrial ultrasonic air humidifier is designed to increase relative air humidity in greenhouses, mushroom-growing rooms, printing facilities, warehouses, production areas and other larger indoor spaces. The high-frequency ultrasonic atomiser breaks water into fine droplets smaller than 5 μm and produces a cool mist.

The humidification capacity reaches 3 kg of water per hour. The integrated digital control system, LCD display and humidity sensor allow ambient conditions to be monitored, the desired humidity level to be set and either automatic or manual operating mode to be selected.

The unit is powered from a 230 V AC, 50 Hz mains supply and has a power consumption of 300 W. Mist is discharged through one Ø110 mm connection, to which a suitable mist-distribution duct can be connected.

• automatic humidity maintenance;
• manual humidification mode;
• setting the desired humidity level;
• displaying the current humidity;
• timer setting function;
• LCD display and control buttons.

• 3 kg/h humidification capacity – for industrial and agricultural premises.
• Ultrasonic technology – for generating a cool mist flow.
• Droplets smaller than 5 μm – for more even distribution.
• Automatic humidity control.
• Manual operating mode.
• Specified range of 10–90% RH.
• Sensor accuracy of ±3% RH.
• LCD display and control panel.
• Timer setting function.
• One Ø110 mm mist outlet.
• 300 W power consumption.
• Castors with brakes – for convenient movement and secure positioning.

• In greenhouses – to maintain the relative humidity required by plants.
• In mushroom-growing rooms – to create a humid microclimate.
• In nurseries – for young plants and seedlings.
• In agricultural buildings – for automatic humidity control.
• In printing facilities – to regulate the humidity of paper and the production environment.
• In textile production – to reduce electrostatic charge and dry air.
• In woodworking facilities – to maintain the required process microclimate.
• In warehouses – where stored materials require higher humidity.
• In electronics and production areas – to reduce dry air and static electricity.
• In other industrial premises – where automatic cool-mist humidification is required.

1. Position the unit securely. Use a level, dry and firm surface.
2. Lock the front castors. The unit must not move during operation.
3. Prepare the water supply. Use clean water that meets the unit's requirements.
4. Connect the mist duct. If a pipe is used, it must fit the Ø110 mm outlet.
5. Keep the humidity sensor away from direct mist. This helps obtain more representative room humidity readings.
6. Connect the unit to a 230 V mains supply. Use an earthed socket suitable for the required load.
7. Select the control mode. Choose automatic or manual operation.
8. Set the desired humidity. Select the value according to the needs of the plants, products or process.
9. Set the timer if required. Use the timer function provided on the control panel.
10. Monitor operation. Check mist distribution, condensation formation and humidity readings.

• Use only with a 230 V AC, 50 Hz mains supply.
• The unit must be connected to an earthed socket.
• Protect the control and electrical parts against direct exposure to water.
• Do not use contaminated water or water with an unsuitable chemical composition.
• Do not direct mist straight at electrical equipment, walls or ceilings.
• Do not allow condensation to form in the room.
• Do not obstruct the mist outlet.
• Do not use a duct that is too narrow or blocked.
• Disconnect the unit from the mains before cleaning.
• Do not dismantle the ultrasonic generator or control electronics.
• Repairs must be carried out by a qualified specialist.

• Replace or top up the water regularlyand do not allow it to stand for long periods.
• Clean the water tank and pipeworkto prevent deposits from accumulating.
• Remove limescale from the ultrasonic elements in accordance with the operating instructions.
• Check the Ø110 mm mist outlet and duct – they must not be blocked.
• Clean the humidity sensorwhile protecting it against mechanical damage.
• Clean the housing with a soft, slightly damp cloth.
• Do not use petrol, acetone or aggressive solvents.
• If the unit will not be used for a long period, empty, clean and dry it completely.

Industrial 3 kg/h ultrasonic air humidifier

The ultrasonic air humidifier is designed for greenhouses, mushroom-growing facilities, printing, textile, production and other premises where automatic maintenance of relative humidity is required.

The high-frequency atomiser produces cool-mist droplets smaller than 5 μm, while the maximum stated humidification capacity is 3 kg of water per hour.

The LCD display, humidity sensor with ±3% RH accuracy, and automatic and manual modes allow the humidification process to be monitored and adjusted.

One Ø110 mm mist outlet allows a distribution duct to be connected, while universal castors and front brakes make the unit easier to move and position securely.