Products catalog

  • Industrial ultrasonic air humidifier | 7 kg/h | 1200 W | 20–200 m² | automatic humidity control | ESCZ-UH-12001

    Code: ESCZ-UH-12001

    Industrial ultrasonic air humidifier, output 7 kg/h, power 1200 W, recommended for 20–200 m² rooms. Automatically maintains the set humidity.

  • Industrial ultrasonic air humidifier | 7 kg/h | 1200 W | 20–200 m² | automatic humidity control | ESCZ-UH-12001

    Industrial ultrasonic air humidifier with an output of 7 kg/h, designed for greenhouses, mushroom farms, warehouses, print shops and production halls. Ultrasound turns water into a fine mist that evaporates quickly in the air. The unit maintains the set relative humidity by itself.

    Key point:
    Industrial output allows one unit to maintain humidity in a larger room. Correct humidity reduces material drying and static electricity and improves growing conditions for plants and mushrooms.
    Output
    7 kg/h
    Power
    1200 W
    Area
    20–200 m²
    Control
    automatic

    Operating principle

    An ultrasonic transducer vibrates the water at high frequency and breaks it into fine droplets, which the airflow carries into the room.

    A humidity sensor monitors relative humidity and switches humidification on and off when the set level is reached.

    Confirm the water supply method according to site conditions before installation.

    Why choose ESCZ-UH-12001?
    A specific output of 7 kg/h at 1200 W and a clear application area of 20–200 m²: it is easy to calculate how many units a site needs.

    Technical specifications

    Product type Industrial ultrasonic air humidifier
    Code ESCZ-UH-12001
    Humidification output 7 kg/h (according to supplier data)
    Power 1200 W (according to supplier data; exact power for the specific configuration confirmed when ordering)
    Supply voltage 110–240 V AC
    Atomizing plates 6 / 10 / 20 / 30
    Control automatic humidity control, digital display, timer
    Recommended area 20–200 m²
    Mist droplet size 1–10 µm
    Operating temperature +3 … +45 °C
    Additional pump drain
    Dimensions 700 × 420 × 480 mm
    Weight 24 kg

    Main functions

    • Ultrasonic mist – fine droplets (1–10 µm) evaporate quickly.
    • Output 7 kg/h – sufficient for a 20–200 m² room.
    • Automatic control – maintains the set RH without operator intervention.
    • Pump drain – additional convenience or safety feature.

    Where is it used?

    • Greenhouses and nurseries
    • Mushroom growing rooms
    • Warehouses (wood, paper, textiles)
    • Print shops and packaging halls
    • Production halls where static electricity must be reduced
    • Woodworking workshops

    Use by need

    For greenhouses or mushroom farms.
    Stable humidity improves growing conditions for plants and mycelium.
    For warehouse or production managers.
    Less material drying and fewer static discharges.
    For print shops or furniture production.
    Paper and wood deform less.

    Practical use

    If the relative humidity in a 200 m² greenhouse or warehouse drops to 20–30 % during the heating season, a 7 kg/h humidifier with automatic control helps bring it back to the required level.

    Pros

    • Output 7 kg/h
    • Fine, quickly evaporating mist
    • Automatic humidity control
    • Pump drain
    • Ultrasound does not heat water – lower consumption than steam humidification

    Cons / limitations

    • Softened or demineralised water is required – otherwise white mineral dust settles
    • Humidity sensor readings depend on its position
    • The water supply solution must be planned in advance
    • Ingress protection (IP) not specified – for indoor use
    • The supplier states the same 1200 W power for all configurations – exact power is confirmed when ordering

    Safety and installation notes

    • Connect to an earthed socket matching the 110–240 V AC supply.
    • Do not direct mist or humid airflow at electrical equipment, panels or luminaires.
    • Disconnect from the mains before cleaning or refilling.
    • Clean the water tank regularly to prevent bacterial growth.
    • Do not keep relative humidity above 60–65 % for long periods – condensation and mould may form.

    Quick selection guide

    7 kg/h
    1200 W
    20–200 m²
    automatic
    Suitable when you need to:
    • increase relative humidity in a 20–200 m² room;
    • maintain stable growing or storage conditions;
    • have humidity maintained automatically.
    Check before use:
    • room volume and air change rate;
    • water hardness;
    • supply voltage (110–240 V AC).
    Important reminder: a humidifier does not replace ventilation or reduce CO₂, and excessive humidity promotes condensation and mould.

    FAQ

    What room size is it suitable for?
    Recommended for 20–200 m² rooms, depending on the air change rate and target humidity.
    Can tap water be used?
    Yes, but hard water leaves white mineral dust – softened water is recommended.
    Does it maintain humidity automatically?
    Yes, the unit maintains the set relative humidity.
    How is water supplied?
    Please confirm when ordering – depends on the configuration.
    What are the power and supply?
    1200 W, 110–240 V AC.
    Can it be used outdoors?
    No, the unit is intended for indoor use.

    Industrial ultrasonic air humidifier | 7 kg/h | 1200 W | 20–200 m² | automatic humidity control | ESCZ-UH-12001

    Industrial ultrasonic air humidifier 7 kg/h, 1200 W, for 20–200 m² rooms, with automatic humidity control – for greenhouses, mushroom farms, warehouses, print shops and production halls.

    Published: 2026-11-12 · Data based on supplier specification: 2026-11-12

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Subscribtion to new arrivals

    privacy policy

    Information