Products catalog

  • Infrared Sensor | IR | 5V/12V/24V | 25W/60W/120W | 5A | 37x16x16mm | White | Surface-Mounted | T-20003 | 4772124004627

    Code: T-20003
    Barcode: 4772124004627

    IR sensor designed for automatic control of LED lighting or other low-voltage devices. The sensor operates with 5V, 12V, or 24V voltage, making it suitable for various LED lighting, furniture, display case, cabinet, shelf, advertising, or decorative lighting systems.

    Due to its compact housing size, white design, and 1.5 m DuPont cable, this sensor can be easily integrated wherever convenient, aesthetic, and contactless control is required. It is a practical solution when lighting needs to turn on or be controlled by moving a hand or object close to the sensor detection area. 

  • Technical Specifications

    Product type: infrared sensor
    Sensor type: IR / infrared
    Mounting type: surface-mounted
    Housing color: white
    Input voltage: 5V / 12V / 24V
    Maximum load current: 5A
    Maximum load power at 5V: 25W
    Maximum load power at 12V: 60W
    Maximum load power at 24V: 120W
    Dimensions: 37 x 16 x 16 mm
    Product weight: approx. 52 g
    Cable: 1.5 m DuPont cable + sensor
    Application: for controlling LED lighting, furniture lighting, display cabinets, cupboards, shelves, and other low-voltage systems

    Functions
    Non-contact control – allows switching lighting on or off by moving a hand or object near the sensor area
    IR infrared operation – the sensor reacts to movement/object detection within the infrared zone
    LED lighting control – suitable for LED strips, LED modules, furniture, display cabinet and shelf lighting
    Operation with 5V / 12V / 24V systems – can be used in various low-voltage lighting circuits
    Up to 5A load control – allows control of up to 25W at 5V, up to 60W at 12V, or up to 120W at 24V
    Surface mounting – installed on the surface for quick and easy installation
    Compact size – 37 x 16 x 16 mm housing allows installation in limited spaces
    1.5 m DuPont cable – provides greater flexibility when installing the sensor in a convenient location
    Applications

    For electricians: Convenient component for low-voltage lighting systems. Due to its compact size and surface-mounted design, the sensor can be quickly installed on a surface, while the 1.5 m cable provides greater installation flexibility. Suitable when an aesthetic and modern LED control solution is required without a conventional mechanical switch.

    For engineers or designers: The IR sensor is useful when designing furniture lighting, commercial spaces, displays, showcases, or decorative lighting solutions. The wide voltage range allows the same sensor type to be used in different systems, while the 5A load current provides sufficient capacity for most LED lighting applications.

    For retail, furniture manufacturing, and exhibition installers: Useful for display cabinets, product shelves, exhibition stands, and furniture lighting. It allows the creation of neat, modern, and convenient lighting control without adding extra switches to the design.

    Advantages
    Operates with 5V, 12V, and 24V voltage
    Suitable for various LED lighting solutions
    Can be used in both residential and commercial projects
    Convenient non-contact control
    Disadvantages
    Designed only for low-voltage systems – 5V, 12V, or 24V
    Not suitable for direct 230V load control
    Is this IR sensor suitable for LED strips?

    Yes, this sensor is suitable for LED strips if the LED system operates on 5V, 12V, or 24V and the total load does not exceed 5A.

    What maximum power can be connected to this sensor?

    The maximum power depends on the operating voltage:

    at 5V – up to 25W
    at 12V – up to 60W
    at 24V – up to 120W
    Can this sensor be connected directly to a 230V mains supply?

    No. This sensor is designed only for 5V, 12V, or 24V low-voltage systems. When used with a 230V mains supply, a suitable power supply unit is required to reduce the voltage to the necessary operating voltage.

    Where is this type of sensor most commonly used?

    It is most commonly used for kitchen furniture LED lighting, cupboard and shelf lighting, display cabinets, mirror lighting, exhibition stands, and decorative LED lighting. 

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Wireless control kit | actuator RFSA-61B and wall controller RFWB-40 | 866-916MHz | 230VAC | iNELS RF | RFSET-SW-F1
    Code: RFSET-SW-F1

    iNELS RF RFSET-SW-F1 is a wireless control kit: RFSA-61B actuator (230 V AC, 1 changeover contact 16 A AC1, 6 functions) and RFWB-40 wall controller (CR2032, about 5 years). RFIO2 communication up to 200 m, works without internet.

    Price 63.90 € VAT incl.
    ( 52.81 € VAT excl. )
    Flexible copper cable H05VV-F | 3G1.5 mm² | 300/500 V | round | white | 1 m | Lietkabelis
    Code: 92331501

    H05VV-F 3G1.5 mm² – AB Lietkabelis flexible round copper cable with class 5 conductors, PVC insulation and a white PVC sheath, 300/500 V. Sold by the metre.

    Cores: L, N, PE. Indicative current ≈ 16 A – for household appliances indoors.

    Price 1.04 € VAT incl.
    ( 0.86 € VAT excl. )
    Cable sheath and wire stripper 0.2–4.0 mm² | ErgoStrip KNIPEX
    Code: 169501SB

    KNIPEX high-quality, ergonomically designed wire and cable stripping tool for fast, precise, and safe work. This stripping knife is highly favored by professional electricians for its versatility, durability, and practical design. Suitable for removing insulation from both signal and power wires, as well as for installation, data, and coaxial cables.

    Perfectly suited for use on construction sites and in domestic installations, especially where wires need to be quickly and accurately prepared for connection in confined spaces. 

    Price 48.40 € VAT incl.
    ( 40.00 € VAT excl. )
    Sealing protective mastic tape | 25x1x500mm | for sealing cable mechanical damage area | S1052-1-500
    Code: S 1052-1-500

    Specialized self-fusing sealing tape designed for protecting and sealing damaged areas on cables. Made from black thermoplastic, highly flowable mastic, this tape effectively shields cable insulation damage from moisture, corrosion, and dust. Used for emergency or preventive repair of electrical, telecommunication, and signal cables, especially suitable for outdoor and damp environments.

    Price 7.87 € VAT incl.
    ( 6.50 € VAT excl. )
  • Subscribtion to new arrivals

    privacy policy

    Information