
Insulated bootlace ferrule | 1.5mm² | 8mm | crimp | black | 100 pcs | Sofamel APF-1,50/8 | 245130
Code: 245130Price 1.11 € VAT incl.( 0.92 € VAT excl. )Insulated wire end ferrule 1.5 mm² for flexible wires, 8 mm tube, black. Sofamel APF-1,50/8, tin-plated copper, PA collar. 100 pcs per pack.
-
Insulated bootlace ferrule | 1.5mm² | 8mm | crimp | black | 100 pcs | Sofamel APF-1,50/8 | 245130
The insulated ferrule terminates a flexible 1.5 mm² wire before it is connected to a screw or spring terminal. The strands are crimped in a tin-plated copper tube, and the insulating collar protects the wire entry.
Key point:
Unsecured strands of a flexible wire splay in the terminal, some break, and the contact weakens and heats up. The ferrule turns the strands into a solid pin – the connection stays reliable after vibration and temperature cycles.Cross-section
1.5 mm²Tube length
8 mmColour
blackPack
100 pcsOperating principle
Strip the insulation to the ferrule tube length (8 mm), twist the strands and insert the wire fully – the wire insulation must enter the insulating collar.
The ferrule is crimped with ferrule crimping pliers using a square or trapezoidal profile. The tube and strands are compressed into one solid pin.
The crimped pin is inserted into the terminal and tightened to the equipment manufacturer's torque – the terminal clamps solid metal, not individual strands.
Why choose Sofamel APF-1,50/8?
Tin-plated copper tube and PA collar; the black colour (Sofamel F) identifies the cross-section at a glance, without measuring.Technical specifications
Product type Insulated bootlace ferrule (wire end ferrule) Manufacturer Sofamel (Spain) Model APF-1,50/8 Manufacturer code 245130 EAN 8435157312867 Wire cross-section 1.5 mm² Tube (pin) length 8 mm Overall length 14.6 mm Tube inner Ø 1.7 mm Collar Ø 3.5 mm Collar colour black (colour code Sofamel F) Material electrolytic copper, tin-plated; insulating collar – polyamide (PA) Pack 100 pcs Certificate UL Key functions
- Strand compression – the terminal clamps the full cross-section, not individual strands.
- Tin-plated copper – lower contact resistance and protection against oxidation.
- Insulating collar – protects the wire entry and eases insertion.
- Colour code – the cross-section is recognised at once during installation and panel inspection.
- Exact tube length – 8 mm matches the terminal depth – no bare wire, no protruding pin.
Where is it used?
- Residential distribution boards
- Automation and control panels
- Screw and spring terminal blocks
- Circuit breakers, RCDs, contactors
- Controllers, relays, power supplies
- Motor and equipment connection boxes
Use by need
Panel builder.
Uniform, neat wire ends and faster panel inspection.Electrician.
Flexible wires stay secure in terminals – no re-tightening needed.Maintenance technician.
Fewer loose connections in vibrating equipment.Practical use
If you connect a flexible 1.5 mm² wire to a circuit breaker in a panel, crimp a ferrule on it – the terminal clamps all strands and the joint does not need re-tightening at periodic inspection.Advantages
- Strands do not splay or break in the terminal
- Stable contact even under vibration
- Tin-plated copper – protection against oxidation
- Colour coding by cross-section
- Pack of 100 pcs
Disadvantages / limitations
- For flexible wires only – not needed for solid wire
- Requires ferrule crimping pliers – ordinary pliers do not crimp properly
- Single use – after removal the wire end must be cut off
- Tube length 8 mm – for a terminal of different depth choose another length
Safety and installation notes
- Switch off the voltage and verify it is absent before work.
- Choose the ferrule exactly to the wire cross-section (1.5 mm²) – not larger, not smaller.
- Crimp only with the intended tool and the correct die.
- Do not use a badly crimped ferrule – cut it off and crimp a new one.
- Tighten the terminal to the manufacturer's torque and check the wire with a pull test.
Quick selection guide
1.5 mm²8 mmblack100 pcsSofamel APF-1,50/8Suitable when you need:- to connect a flexible wire to a screw or spring terminal
- a neat, easily inspected connection
- reliable contact in vibrating equipment
Check before use:- the wire cross-section (1.5 mm²)
- the terminal depth and tube length (8 mm)
- that you have ferrule crimping pliers
Important reminder: A ferrule does not replace correct sizing of the wire and the protective device – it ensures a quality wire-end connection.FAQ
Is a ferrule needed for solid wire?
No – it is intended for flexible (stranded) wires.Which wire does this ferrule fit?
A flexible 1.5 mm² wire.What do I crimp it with?
Ferrule crimping pliers with a square or trapezoidal profile.How much insulation should be stripped?
As long as the tube – 8 mm.What does the colour mean?
The colour indicates the cross-section according to the Sofamel F colour code.Can the ferrule be reused?
No – after removal the wire end must be cut off and a new ferrule crimped.Insulated bootlace ferrule | 1.5mm² | 8mm | crimp | black | 100 pcs | Sofamel APF-1,50/8 | 245130
Insulated bootlace ferrule 1.5 mm², 8 mm tube, black, 100 pcs – Sofamel APF-1,50/8. Reliable termination of flexible wires for panels, automation and equipment.
Published: 2026-11-12 · Data verified against the manufacturer datasheet: 2026-11-12
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Cable sheath and wire stripper 0.2–4.0 mm² | ErgoStrip KNIPEXCode: 169501SBKNIPEX high-quality, ergonomically designed wire and cable stripping tool for fast, precise, and safe work. This stripping knife is highly favored by professional electricians for its versatility, durability, and practical design. Suitable for removing insulation from both signal and power wires, as well as for installation, data, and coaxial cables.
Perfectly suited for use on construction sites and in domestic installations, especially where wires need to be quickly and accurately prepared for connection in confined spaces.
Price 48.40 € VAT incl.( 40.00 € VAT excl. )Terminal clamp | electrical wire connector | universal | 2x0.2-4mm² | for all wire types | WAGO | 221-412 | 4050821808435Code: WAGO 221-412The WAGO 221-412 connector is one of the most popular and reliable electrical wire connection solutions in the world. It is designed for fast, safe, and professional connection of various types of copper conductors without the need for additional tools.
Thanks to the patented CAGE CLAMP® technology and convenient orange levers, this connector allows quick connection of solid, stranded, and flexible conductors. The transparent housing enables visual inspection of the connection quality, while its compact dimensions allow easy installation in junction boxes, distribution boards, luminaires, and various automation equipment.
The WAGO 221 series is widely used in residential, commercial, and industrial applications where reliable, standards-compliant, and long-lasting wire connections are required.
Price 0.30 € VAT incl.( 0.25 € VAT excl. )CYKY-L 2×1.5 mm² | Copper power cable | no PE core | 450/750 V | black | 1 m | LietkabelisCode: 91920113CYKY-L 2×1.5 (2×1.5 mm²) – 450/750 V copper power cable for single-phase 230 V circuits without a PE conductor. Solid cores, PVC insulation and sheath, suitable indoors, outdoors and in the ground. AB Lietkabelis, price per 1 m.
Price 0.64 € VAT incl.( 0.53 € VAT excl. )










