IP Alarm Interface Module | for Public Address Systems | 32 Inputs | 8 Outputs | 100-240VAC | TCP/IP

IP Fire Alarm Interface Module for Warning and Audio Systems – 32 Inputs, 8 Outputs, TCP/IP, 19" Rack 1U

IP fire alarm interface module is designed for the integration of fire alarm systems with IP-based warning, public address, voice evacuation and audio notification systems. The device provides 32 alarm input channels, 8 alarm output channels, RJ45 Ethernet TCP/IP communication and a standard 19" rack 1U mounting format. It is suitable for schools, factories, warehouses, administrative buildings, hospitals, transport terminals and other facilities where automatic emergency notification and multi-zone warning control are required.

• 32 × alarm input interfaces
• 8 × alarm output interfaces
• 1 × RJ45 Ethernet port

• Fire alarm system integration – connects fire alarm signals to IP-based warning and evacuation systems.
• Voice evacuation systems – enables automatic playback of pre-recorded emergency messages.
• Public address and notification systems – allows warning notifications in selected zones or across the entire facility.
• Industrial and commercial buildings – suitable for factories, warehouses, offices, schools, hospitals and terminals.
• BMS and safety infrastructure – can be integrated into wider building management and emergency warning systems.

Automatic fire alarm processing: when a signal is received from the fire alarm system, the module automatically transmits information to the server and initiates predefined actions.

Multi-zone warning control: allows warning notifications to be activated in selected zones or throughout the entire facility simultaneously.

IP network integration: operates over an Ethernet network and supports routing between different network segments.

Pre-recorded emergency messages: warning and evacuation audio files can be stored on the server and automatically played when an alarm is triggered.

System expansion: the modular architecture allows additional IP interface modules to be connected for larger installations.

Fast system startup: the ARM + DSP platform ensures a startup time of less than 3 seconds.

For example, the module is installed in a 19" communication or automation rack and connected to a fire alarm control panel. Fire alarm signals are connected to the 32 input channels, while the network port connects the module to the IP audio system server through an Ethernet TCP/IP network.

When an alarm is triggered, the server can automatically start evacuation messages, activate selected loudspeaker zones, send warning notifications to the entire facility or control additional devices through the output channels.

For electricians: the device enables convenient integration of fire alarm control panels with voice warning systems, evacuation loudspeakers, sirens and other field devices. The standard 1U rack format simplifies installation in communication and automation cabinets.

For engineers and system designers: suitable for designing public warning systems, voice evacuation systems, school and university warning networks, factory and warehouse fire safety systems, administrative building infrastructures, hospitals, airports and transportation terminals. The 32 inputs and 8 outputs enable the design of complex multi-zone systems.

For safety and building management professionals: the module can be integrated with fire alarm systems, voice evacuation systems, public address and notification systems, BMS, security infrastructure and emergency warning solutions.

This module is intended for professional fire alarm, IP audio and emergency warning system integration. Incorrect wiring or configuration may affect the operation of the warning system, therefore installation and commissioning must be carried out by qualified specialists.

• Installation must be performed by qualified personnel familiar with fire alarm and voice evacuation systems.
• System design must follow local fire safety and building regulations applicable to the project.
• Compatibility with the fire alarm control panel, server software and IP audio system must be verified before installation.
• Network configuration, routing and IP addressing must be planned correctly for stable operation.
• Emergency messages and zone scenarios should be tested during commissioning.
• Power supply, grounding and rack installation must comply with electrical safety requirements.

Quick selection guide

This IP fire alarm interface module is suitable when fire alarm signals need to be transferred to an IP warning, public address or voice evacuation system. It is especially useful in multi-zone facilities where different building areas must be activated independently or where automatic emergency messages must be played without operator intervention.

To create a fully functioning IP warning and voice evacuation system, it is recommended to combine this module with the following devices:

• USB software license dongle
• IP network audio control / broadcasting console
• Outdoor wall-mounted IP network audio speaker

Professional bridge between fire alarm systems and IP warning networks

This IP fire alarm interface module is a practical solution for projects where fire alarm signals must be automatically transferred to voice evacuation, public address or IP audio warning systems.

With 32 alarm inputs, 8 alarm outputs, Ethernet TCP/IP communication, fast ARM + DSP processing, 19" rack 1U installation and low power consumption, it is suitable for professional multi-zone warning systems in industrial, commercial, educational, healthcare and transport infrastructure facilities.