LC2K reversing contactor | 3P | 6A | 230VAC coil | 3NO auxiliary contacts | for electric motors and control circuits

Reversing Contactor – 3P, 6A, AC-3, 230VAC Coil, 3NO Auxiliary Contacts

A compact Schneider Electric TeSys K series reversing contactor, designed for changing the rotation direction of three-phase electric motors. The device consists of two contactors with mechanical interlocking and factory-pre-wired reversing connections, helping to safely control motor rotation in both forward and reverse directions. The contactor features 3 poles, 6 A AC-3 rated current, and a 230 V AC 50/60 Hz control coil.

• Conveyors – for changing transport direction.
• Gates and Barriers – for opening and closing functions.
• Lifting Mechanisms – for controlling upward and downward movement.
• Ventilation and Air Supply Systems – when motor direction reversal is required.
• Machine Tools and Workshops – for reversing smaller three-phase motors.
• Automation Panels – for motor control schemes and technological lines.

For example, a reversing contactor can be used in automatic gate systems or a small conveyor control panel. One control signal switches the motor to run forward, and another signal switches it to run in reverse.

The mechanical interlock ensures that the forward and reverse contactors will not be activated at the same time. Additionally, the control scheme usually employs electrical interlocking contacts, motor protection, control buttons, emergency stop circuits, and other safety elements.

Electrician: A convenient solution for smaller motor reversing control schemes. Factory-pre-wired connections and mechanical interlocking help assemble and organize the equipment in the electrical cabinet more efficiently.

Automation Engineer: A suitable component for drive control systems that require forward/reverse functionality. The contactor can be used in conjunction with pushbuttons, switches, PLC controllers, timer relays, limit switches, and motor protection devices.

Maintenance Specialist: Suitable for replacing an existing reversing contactor or modernizing a small-power motor control system, provided the coil voltage, motor power, contact load, and control scheme compatibility have been verified.

The reversing contactor is used in three-phase motor control circuits; therefore, incorrect wiring can lead to equipment failure, short circuits, or hazards to personnel. Installation and connection should only be performed by a qualified electrician.

• Disconnect power before installation and ensure there is no voltage in the circuit.
• Check the control coil voltage – this model requires 230 VAC.
• Do not exceed 6 A AC-3 rated current and consider actual motor power and inrush currents.
• Use appropriate motor protection against overloads and short circuits.
• Install the IP20 contactor in a closed cabinet, protected from dust, moisture, and accidental contact.
• Use electrical interlocking in the reversing scheme, proper logic for control signals, and time delays between direction changes if necessary.

Quick Selection Guide

This is a suitable choice when a reversing contactor is needed for a smaller three-phase motor using a 230 VAC control circuit. This model is ideal for motors up to 2.2 kW at 400 VAC AC-3 operation when direction reversal is required.

A Compact Reversing Contactor for Reliable Control of Small Three-Phase Motors

This is an essential solution for changing motor direction in automatic gates, conveyors, ventilation units, lifting mechanisms, machine tools, and other systems.

With a 3-pole design, 6 A AC-3 rated current, 230 VAC coil, mechanical interlock, factory-pre-wired reversing connections, and DIN rail mounting capability, this contactor is easy to integrate into professional motor control schemes.