Products catalog

  • LED floodlight with motion sensor | 18W | 230V | 3000K | 2204lm | IP44 | Steinel | XLED PRO ONE S

    Code: 069568
    Barcode: 4007841069568
  • LED floodlight with motion sensor | 18W | 230V | 3000K | 2204lm | IP44 | Steinel | XLED PRO ONE S

    Steinel XLED PRO ONE S is an LED floodlight with a built-in PIR motion sensor: 2,204 lm of 3000 K warm white light and IP44 housing protection. It switches on when motion is detected and off after the set time.

    Key idea:
    The motion sensor and twilight sensor light the area only in the dark and only when someone is there – less electricity is used, and light switching on suddenly deters unwanted visitors. Suitable for entrances, terraces and narrower zones.
    Power
    18.4 W
    Luminous flux
    2,204 lm
    Sensor
    PIR, up to 10 m
    Protection
    IP44

    Operating principle

    The floodlight is fixed to a wall or structure and connected to the 230 V mains. The sensor reacts to heat emitted by a person or vehicle – it works on the passive infrared (PIR) principle.

    When motion is detected (at 240°, up to 10 m), the floodlight switches on 2,204 lm of light, while the twilight sensor prevents it from switching on in daylight.

    The on-time after the last motion is adjustable: 8 s – 35 min. A 10 % basic light level can also be activated, and settings can be changed with the RC 12 remote control.

    What makes XLED PRO ONE S useful?
    One product does two jobs: it lights the area when needed and works as a simple deterrent – without a separate sensor or extra wiring.

    Technical specifications

    Product type LED floodlight with motion sensor
    Manufacturer / series Steinel / XLED PRO ONE
    Model XLED PRO ONE S
    Product code 069568
    EAN 4007841069568
    Power 18.4 W
    Supply voltage 220–240 V AC
    Luminous flux 2.204 lm
    Colour temperature 3000 K
    Ingress protection IP44
    Colour rendering index (CRI) 80
    Impact resistance IK03
    Sensor type PIR
    Detection angle 240°
    Detection range 10 m
    Time setting 8 s – 35 min
    Twilight sensor Adjustable
    Basic light level 10 %
    Remote control RC 12
    Mounting height 2 m (max. 6 m)
    Operating temperature −20…+40 °C
    Housing Aluminium, tempered glass
    Colour Anthracite
    Service life 50,000 h
    Manufacturer warranty 5 years
    Luminous efficacy 120 lm/W
    Dimensions 230 × 229 × 182 mm

    Key features

    • Built-in PIR sensor – light switches on automatically, no switch needed.
    • Twilight sensor – the floodlight does not switch on in daylight.
    • Adjustable on-time – 8 s – 35 min.
    • IP44 housing – suitable under a canopy and in sheltered outdoor locations.
    • 3000 K warm white light – cosy light for residential settings and façades.
    • 10 % basic light and RC 12 remote – settings are changed without climbing up to the floodlight.

    Where is it used?

    • House entrances and steps
    • Terraces and garden paths
    • Garage doors and gazebos
    • Outbuildings
    • Passages between buildings
    • Bin areas

    Use by need

    Homeowner.
    Light switches on as you approach the door – no searching for a switch in the dark.
    Electrician.
    One product instead of a separate luminaire and sensor – fewer connections and less installation time.
    Building manager.
    Entrance lighting is on only when it is used.

    Practical application

    If light is needed at the front door only when someone arrives, XLED PRO ONE S is mounted above or next to the door: the sensor switches on 2,204 lm as you approach and switches it off after the set time.

    Pros

    • Built-in PIR sensor and twilight sensor
    • Light only when needed – lower running costs
    • 2,204 lm luminous flux
    • IP44 protection
    • 5-year manufacturer warranty
    • 10 % basic light and remote included

    Cons / limitations

    • The sensor may react to cars, animals or heat sources – correct aiming is essential
    • The sensor does not work through glass or behind obstacles
    • IP44 – best mounted under a canopy or in a sheltered location
    • Fixed colour temperature

    Safety and installation notes

    • Disconnect the power supply before installation and verify the line is dead.
    • Recommended mounting height: 2 m (max. 6 m); mounting too high reduces sensor sensitivity.
    • Do not aim the sensor at a street, trees, ventilation openings or heaters – this causes false triggering.
    • The sensor detects a person walking across its zone better than one walking straight towards it.
    • Make outdoor connections in sealed boxes; earth the housing (PE).
    • Work on 230 V installations must be carried out by a qualified electrician.

    Quick selection guide

    18.4 W
    2,204 lm
    3000 K
    IP44
    PIR 10 m
    230 V
    Suitable when you need:
    • Automatic lighting without a switch
    • Lighting an entrance, yard or driveway when there is motion
    • An extra deterrent at night
    Check before use:
    • Whether the sensor zone covers the required passage or driveway
    • Whether there are heat sources or moving objects nearby (trees, street)
    • Whether it can be mounted at the recommended height (2 m (max. 6 m))
    • Whether IP44 is sufficient for the location (ideally under a canopy)
    Important reminder: A floodlight with a motion sensor is not an alarm system – it lights and deters, but does not report an intrusion.

    FAQ

    Will the floodlight switch on in daylight?
    No, the twilight sensor allows it to switch on only at the set darkness level.
    How long does it stay on after motion?
    The on-time is adjustable: 8 s – 35 min.
    At what distance does the sensor detect motion?
    According to the manufacturer – up to 10 m, at 240°.
    Will the sensor react to cats or dogs?
    It may – a PIR sensor reacts to heat and movement, so sensitivity and direction are worth adjusting.
    Can it be installed outdoors?
    Yes, the IP44 housing is suitable outdoors, ideally under a canopy or eave.
    Can several floodlights be connected to one circuit?
    Yes, each floodlight has its own sensor and is connected to the 230 V circuit individually.

    LED floodlight with motion sensor | 18W | 230V | 3000K | 2204lm | IP44 | Steinel | XLED PRO ONE S

    Steinel XLED PRO ONE S – 18.4 W, 2,204 lm, 3000 K, IP44 LED floodlight with built-in PIR motion sensor for automatic lighting of entrances and terraces.

    Published: 2026-11-14 · Data verified against the manufacturer datasheet: 2026-11-14

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Rechargeable LED work torch | 300/100lm | IP20 | 3,7V/2,2Ah | magnet | foldable | Brennenstuhl HL2 DA 61 M3H2 | 1175670
    Code: HL2DA61M3H2

    LED rechargeable work flashlight/floodlight designed for use in workshops, garages, vehicles, warehouses, technical rooms, or during repair work. Thanks to the main 300 lm light output and an additional 100 lm LED light source in the head, this floodlight allows convenient illumination of both wider work areas and narrower, harder-to-reach places.

    The built-in 3.7 V / 2.2 Ah lithium-ion battery, magnetic mounts, rotating hooks, and support foot adjustable up to 200° allow the flashlight to be used very flexibly – it can be placed, hung, or attached to a metal surface. It is a practical solution for electricians, mechanics, craftsmen, maintenance specialists, and household users. 

    Price 27.87 € VAT incl.
    ( 23.03 € VAT excl. )
    Price 18.15 € VAT incl.
    ( 15.00 € VAT excl. )
    Rechargeable LED work light | 30W | 3200lm | IP54 | Brennenstuhl JARO 3010 MA | 1171250345
    Code: 1171250345

    Rechargeable mobile LED work floodlight designed for bright, reliable and energy-efficient lighting in places where there is no permanent power supply. With 30W power, 3200 lm luminous flux and 6500K daylight white color temperature, the floodlight ensures clear visibility during construction, repair, installation, maintenance or outdoor work.

    This portable LED work floodlight is suitable for use on construction sites, in garages, workshops, warehouses, car repair areas, households or for outdoor work. The integrated battery allows the floodlight to be used for up to 12 hours, while the USB-C charging port ensures convenient charging. 

    Price 82.28 € VAT incl.
    ( 68.00 € VAT excl. )
  • privacy policy

    Information