LED outdoor floodlight | 18W | 230V | 3000K | 2236lm | IP44 | Steinel XLED PRO ONE 069513
Code: 069513Price 63.73 € VAT incl.( 52.67 € VAT excl. )-
LED outdoor floodlight | 18W | 230V | 3000K | 2236lm | IP44 | Steinel XLED PRO ONE 069513
Steinel XLED PRO ONE 069513 is a 18 W LED floodlight for lighting outdoor areas and building surroundings. 2236 lm luminous flux, warm white 3000 K light and IP44 protection for outdoor use.
Key point:
A simple and cost-effective replacement for a halogen floodlight: the 18 W LED delivers 2236 lm and connects directly to 230 V mains without a separate driver.Power
18 WLuminous flux
2236 lmColour temperature
3000 KProtection
IP44Operating principle
The floodlight is fixed to a wall, pole or structure with a swivel bracket; the light direction is set by tilting the housing.
The integrated LED driver runs directly from 220–240 V AC mains; switching can be done with a switch, twilight switch, time relay or motion switch.
The result is even warm white light with energy use several times lower than a halogen floodlight.
Why choose this floodlight?
Direct 230 V connection, IP44 protection and integrated LEDs – quick installation and minimal maintenance.Technical specifications
Product type LED floodlight Manufacturer / model Steinel XLED PRO ONE 069513 EAN 4007841069513 Power 18 W Luminous flux 2236 lm Luminous efficacy 124 lm/W Colour temperature 3000 K (warm white) Supply voltage 220–240 V AC Ingress protection IP44 Dimensions 182 × 229 × 206 mm Main features
- IP44 protection – suitable for outdoor use.
- Direct 230 V supply – no separate LED driver needed.
- Swivel bracket – light aimed where needed.
- warm white 3000 K light – people, vehicles and signs are clearly visible.
- Any control – switch, twilight switch, time relay or motion switch.
Where is it used?
- House yard and driveway
- Garage gate, parking space
- Warehouse and workshop access areas
- Façade and entrance lighting
- Farm buildings, terraces
- Construction sites and yards
Use by need
For homeowners.
Lights up the yard, gate or terrace quickly and inexpensively.For electricians.
Direct 230 V connection and simple mounting – minimal installation time.For facility managers.
Lower energy costs and LEDs without lamp replacement.Practical application
If the yard light should switch on at dusk and off at a set time, connect the floodlight via a twilight switch or time relay. If light is needed only on motion, choose a floodlight with a motion sensor or install a separate motion switch.Advantages
- IP44 protection
- Direct 230 V supply
- 2236 lm luminous flux
- Simple installation
- Low energy use
Disadvantages / limitations
- Not dimmable
- Integrated LEDs – not replaceable
- Automation requires an additional control device
Safety and installation notes
- Install with the supply disconnected; connection by a qualified electrician.
- Connect the protective earth (PE).
- Make outdoor cable connections in a sealed IP65 or higher junction box.
- Do not cover the housing – it dissipates heat.
- Do not aim the light into the eyes of road users and neighbours.
Quick selection guide
18 W2236 lm3000 KIP44230 VSuitable when you need:- outdoor area or façade lighting
- replacing a halogen floodlight
- simple installation without extra components
Check before use:- whether 3000 K light colour suits
- whether the power matches the area and mounting height
- whether automation is needed (twilight switch, motion switch)
Important reminder: The floodlight is not an emergency luminaire.FAQ
Can it be installed outdoors?
Yes, the protection rating is IP44.Is a separate driver needed?
No, it connects directly to 230 V AC mains.What colour is the light?
warm white, 3000 K.Can it be controlled by a twilight or motion switch?
Yes, it works with any 230 V switch.Is it dimmable?
No, the floodlight is not dimmable.What is the luminous flux?
2236 lm.LED outdoor floodlight | 18W | 230V | 3000K | 2236lm | IP44 | Steinel XLED PRO ONE 069513
Steinel XLED PRO ONE 069513 – 18 W, 2236 lm, 3000 K, IP44 LED floodlight for outdoor areas, façades and yards with direct 230 V connection.
Published: 2026-11-14 · Data verified against manufacturer / supplier data: 2026-11-14
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.ManufacturerThe IP protection class indicates the device's resistance to environmental factors.

The first digit indicates protection against dust and solid objects.
The second digit indicates protection against moisture.First digit values:
X — Untested;
0 — No protection;
1 — Protected against solid objects larger than 50 mm;
2 — Protected against solid objects larger than 12.5 mm;
3 — Protected against solid objects larger than 1 mm;
4 — Protected against solid objects larger than 1 mm;
5 — Dust protected;
6 — Totally dustproof.
Second digit values:X — Untested;
0 — No protection;
1 — Protected against vertically falling water drops;
2 — Protected against water drops falling at a 15º angle;
3 — Protected against rain falling at a 60º angle;
4 — Protected against water splashes;
5 — Protected against water jets;
6 — Protected against large amounts of water;
7 — Protected against short-term immersion in water up to 1 meter deep;
8 — Protected against long-term immersion in water up to 3 meters deep.Lumen (lm) – unit of luminous flux: how much light a lamp or luminaire emits in total. Lux (lx) – illuminance: how much of that light falls on 1 m² of surface (1 lx = 1 lm/m²). Watts (W) only show power consumption – compare LED brightness by lumens.
How many lux does a room need?
Corridor, storeroom, basement 100–150 lx Living room, bedroom 100–300 lx Garage, warehouse 100–200 lx Kitchen, bathroom, desk 300–500 lx Office, computer workstation 500 lx Workshop, fine work 500–750 lx How to calculate the lumens you need
Required lumens ≈ illuminance (lx) × area (m²) ÷ 0.5
The 0.5 factor accounts for light absorbed by walls, ceiling and diffusers and for luminaires getting dirty over time. Example: 18 m² garage, 200 lx → 200 × 18 ÷ 0.5 = 7,200 lm. That is about three 150 cm T8 LED tubes of ~2,500 lm each.
This is an estimate. For an exact design (workplaces, production, public areas) use lighting calculation software, e.g. DIALux.
Recommended values are indicative, based on the principles of EN 12464-1 for workplace lighting.
3 main types of white light:
Warm white (2700 - 3000 K)
Neutral white / daylight (4000 - 4500 K)
Cool white (5000 - 6500 K)
How to choose the right light color temperature:2700 - 3000K creates a cozy atmosphere in a room. Used in spas, hotel entrances, living rooms, and bedrooms.
4000 - 4500K is used in commercial, retail, office spaces, garages, medical buildings, as well as bathrooms, kitchens, and workrooms.
5000 - 6500K is suitable for lighting workshops, operating rooms, or other areas where attention to detail is important. Also suitable for outdoor lighting, modern interiors, and their accents.
To calculate how many and what type of light fixtures are needed for your desired space, visit this website: https://www.dialux.com/en-GB/download.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Rechargeable LED work torch | 300/100lm | IP20 | 3,7V/2,2Ah | magnet | foldable | Brennenstuhl HL2 DA 61 M3H2 | 1175670Code: HL2DA61M3H2LED rechargeable work flashlight/floodlight designed for use in workshops, garages, vehicles, warehouses, technical rooms, or during repair work. Thanks to the main 300 lm light output and an additional 100 lm LED light source in the head, this floodlight allows convenient illumination of both wider work areas and narrower, harder-to-reach places.
The built-in 3.7 V / 2.2 Ah lithium-ion battery, magnetic mounts, rotating hooks, and support foot adjustable up to 200° allow the flashlight to be used very flexibly – it can be placed, hung, or attached to a metal surface. It is a practical solution for electricians, mechanics, craftsmen, maintenance specialists, and household users.
Price 27.87 € VAT incl.( 23.03 € VAT excl. )LED floodlight with motion sensor | 20W | 230V | 6500K | 1600lm | IP54 | IEK | СДО 06-20ДCode: LPDO602-20-65-K02Price 10.92 € VAT incl.( 9.03 € VAT excl. )LED floodlight with motion sensor | 18W | 230V | 3000K | 2204lm | IP44 | Steinel | XLED PRO ONE SCode: 069568Price 80.72 € VAT incl.( 66.71 € VAT excl. )











