Products catalog

  • LED floodlight with motion sensor | 50W | 230V | 4000K | 4500lm | IP65 | Bemko | LFX 50W PIR

    Code: C65-LFX-050BL-4K-PIR
    Barcode: 5900280978417
  • LED floodlight with motion sensor | 50W | 230V | 4000K | 4500lm | IP65 | Bemko | LFX 50W PIR

    Bemko LFX 50W PIR is an LED floodlight with a built-in PIR motion sensor: 4,500 lm of 4000 K neutral white light and IP65 housing protection. It switches on when motion is detected and off after the set time.

    Key idea:
    The motion sensor lights the area only when someone is there – less electricity is used, and light switching on suddenly deters unwanted visitors. Suitable for yards, driveways and building perimeters.
    Power
    50 W
    Luminous flux
    4,500 lm
    Sensor
    PIR
    Protection
    IP65

    Operating principle

    The floodlight is fixed to a wall or structure and connected to the 230 V mains. The sensor reacts to heat emitted by a person or vehicle – it works on the passive infrared (PIR) principle.

    When motion is detected, the floodlight switches on 4,500 lm of light.

    On-time and sensitivity are set with the sensor controls.

    What makes LFX 50W PIR useful?
    One product does two jobs: it lights the area when needed and works as a simple deterrent – without a separate sensor or extra wiring.

    Technical specifications

    Product type LED floodlight with motion sensor
    Manufacturer / series Bemko / LFX
    Model LFX 50W PIR
    Product code C65-LFX-050BL-4K-PIR
    EAN 5900280978417
    Power 50 W
    Supply voltage 220–240 V AC
    Luminous flux 4.500 lm
    Colour temperature 4000 K
    Ingress protection IP65
    Colour rendering index (CRI) >80
    Beam angle 110°
    Sensor type PIR
    Standby power <0.5 W
    Operating temperature −15…+35 °C
    Housing Aluminium, polycarbonate
    Colour Black
    Dimensions 133 × 178 × 190 mm
    Service life 30,000 h (L70B50)

    Key features

    • Built-in PIR sensor – light switches on automatically, no switch needed.
    • Lower running costs – the light is on only when there is motion.
    • Adjustable settings – on-time and sensitivity are matched to the site.
    • IP65 housing – dust-tight and protected against water jets, suitable for exposed outdoor locations.
    • 4000 K neutral white light – comfortable for the eye, suits homes and commercial settings.

    Where is it used?

    • Private yards and driveways
    • Building perimeters and façades
    • Parking spaces
    • Warehouse and workshop access areas
    • Farm yards
    • Back areas of retail premises

    Use by need

    Homeowner.
    A lit driveway when you come home and extra protection at night.
    Electrician.
    Built-in sensor – no separate box or extra wiring needed.
    Small business.
    The back yard or warehouse door is lit only when there is motion.

    Practical application

    If the yard and driveway are dark at night and a permanently lit floodlight would use too much electricity, LFX 50W PIR mounted on the façade switches on only when a car arrives or a person passes.

    Pros

    • Built-in PIR sensor
    • Light only when needed – lower running costs
    • 4,500 lm luminous flux
    • IP65 protection
    • Connects directly to 230 V mains
    • Extra deterrent effect at night

    Cons / limitations

    • The sensor may react to cars, animals or heat sources – correct aiming is essential
    • The sensor does not work through glass or behind obstacles
    • All-night lighting requires additional control
    • Fixed colour temperature

    Safety and installation notes

    • Disconnect the power supply before installation and verify the line is dead.
    • Mount at a height where the sensor zone covers the passage; mounting too high reduces sensitivity.
    • Do not aim the sensor at a street, trees, ventilation openings or heaters – this causes false triggering.
    • The sensor detects a person walking across its zone better than one walking straight towards it.
    • Make outdoor connections in sealed boxes; earth the housing (PE).
    • Work on 230 V installations must be carried out by a qualified electrician.

    Quick selection guide

    50 W
    4,500 lm
    4000 K
    IP65
    PIR
    230 V
    Suitable when you need:
    • Automatic lighting without a switch
    • Lighting an entrance, yard or driveway when there is motion
    • An extra deterrent at night
    Check before use:
    • Whether the sensor zone covers the required passage or driveway
    • Whether there are heat sources or moving objects nearby (trees, street)
    • Whether the mounting height suits the sensor
    • Whether circuit protection matches the total load
    Important reminder: A floodlight with a motion sensor is not an alarm system – it lights and deters, but does not report an intrusion.

    FAQ

    Will the floodlight switch on in daylight?
    A twilight sensor is not stated in the manufacturer data, so daytime switching is best controlled with a photocell or switch.
    How long does it stay on after motion?
    The on-time is adjustable with the sensor control.
    At what distance does the sensor detect motion?
    The distance depends on mounting height and direction of movement.
    Will the sensor react to cats or dogs?
    It may – a PIR sensor reacts to heat and movement, so sensitivity and direction are worth adjusting.
    Can it be installed outdoors?
    Yes, the IP65 housing is dust-tight and protected against water jets.
    Can several floodlights be connected to one circuit?
    Yes, each floodlight has its own sensor and is connected to the 230 V circuit individually.

    LED floodlight with motion sensor | 50W | 230V | 4000K | 4500lm | IP65 | Bemko | LFX 50W PIR

    Bemko LFX 50W PIR – 50 W, 4,500 lm, 4000 K, IP65 LED floodlight with built-in PIR motion sensor for automatic lighting of yards and driveways.

    Published: 2026-11-14 · Data verified against the manufacturer datasheet: 2026-11-14

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Rechargeable LED work light | 30W | 3200lm | IP54 | Brennenstuhl JARO 3010 MA | 1171250345
    Code: 1171250345

    Rechargeable mobile LED work floodlight designed for bright, reliable and energy-efficient lighting in places where there is no permanent power supply. With 30W power, 3200 lm luminous flux and 6500K daylight white color temperature, the floodlight ensures clear visibility during construction, repair, installation, maintenance or outdoor work.

    This portable LED work floodlight is suitable for use on construction sites, in garages, workshops, warehouses, car repair areas, households or for outdoor work. The integrated battery allows the floodlight to be used for up to 12 hours, while the USB-C charging port ensures convenient charging. 

    Price 82.28 € VAT incl.
    ( 68.00 € VAT excl. )
    Modular circuit breaker | 1P | 10A | B | 6kA | DIN | MCB | Schneider Electric | iC60N | A9F73110
    Code: A9F73110

    Modular circuit breaker designed to protect electrical circuits against overload and short circuit. This circuit breaker is mounted on a standard DIN rail, making it ideal for the protection of electrical circuits in residential houses, commercial premises, automation panels, and low-power electrical circuits. The circuit breaker is especially suitable for circuits where there are no high starting currents: lighting, control circuits, alarm systems, automation equipment, and low-power electrical consumers. 

    Price 4.27 € VAT incl.
    ( 3.53 € VAT excl. )
  • privacy policy

    Information