Products catalog

  • LED outdoor floodlight | 50W | 230V | 4000K | 6000lm | IP65 | Philips BVP164 LED60/84

    Code: BVP164 LED60/840
  • LED outdoor floodlight | 50W | 230V | 4000K | 6000lm | IP65 | Philips BVP164 LED60/84

    Philips BVP164 LED60/84 is a 50 W LED floodlight for lighting outdoor areas and building surroundings. 6000 lm luminous flux, neutral white 4000 K light and IP65 protection for outdoor use.

    Key point:
    A simple and cost-effective replacement for a halogen floodlight: the 50 W LED delivers 6000 lm and connects directly to 230 V mains without a separate driver.
    Power
    50 W
    Luminous flux
    6000 lm
    Colour temperature
    4000 K
    Protection
    IP65

    Operating principle

    The floodlight is fixed to a wall, pole or structure with a swivel bracket; the light direction is set by tilting the housing.

    The integrated LED driver runs directly from 220–240 V AC mains; switching can be done with a switch, twilight switch, time relay or motion switch.

    The result is even neutral white light with energy use several times lower than a halogen floodlight.

    Why choose this floodlight?
    Direct 230 V connection, IP65 protection and integrated LEDs – quick installation and minimal maintenance.

    Technical specifications

    Product type LED floodlight
    Manufacturer / model Philips BVP164 LED60/84
    Power 50 W
    Luminous flux 6000 lm
    Luminous efficacy 120 lm/W
    Colour temperature 4000 K (neutral white)
    Supply voltage 220–240 V AC
    Ingress protection IP65

    Main features

    • IP65 protection – suitable for outdoor use.
    • Direct 230 V supply – no separate LED driver needed.
    • Swivel bracket – light aimed where needed.
    • neutral white 4000 K light – people, vehicles and signs are clearly visible.
    • Any control – switch, twilight switch, time relay or motion switch.

    Where is it used?

    • House yard and driveway
    • Garage gate, parking space
    • Warehouse and workshop access areas
    • Façade and entrance lighting
    • Farm buildings, terraces
    • Construction sites and yards

    Use by need

    For homeowners.
    Lights up the yard, gate or terrace quickly and inexpensively.
    For electricians.
    Direct 230 V connection and simple mounting – minimal installation time.
    For facility managers.
    Lower energy costs and LEDs without lamp replacement.

    Practical application

    If the yard light should switch on at dusk and off at a set time, connect the floodlight via a twilight switch or time relay. If light is needed only on motion, choose a floodlight with a motion sensor or install a separate motion switch.

    Advantages

    • IP65 protection
    • Direct 230 V supply
    • 6000 lm luminous flux
    • Simple installation
    • Low energy use

    Disadvantages / limitations

    • Not dimmable
    • Integrated LEDs – not replaceable
    • Automation requires an additional control device

    Safety and installation notes

    • Install with the supply disconnected; connection by a qualified electrician.
    • Connect the protective earth (PE).
    • Make outdoor cable connections in a sealed IP65 or higher junction box.
    • Do not cover the housing – it dissipates heat.
    • Do not aim the light into the eyes of road users and neighbours.

    Quick selection guide

    50 W
    6000 lm
    4000 K
    IP65
    230 V
    Suitable when you need:
    • outdoor area or façade lighting
    • replacing a halogen floodlight
    • simple installation without extra components
    Check before use:
    • whether 4000 K light colour suits
    • whether the power matches the area and mounting height
    • whether automation is needed (twilight switch, motion switch)
    Important reminder: The floodlight is not an emergency luminaire.

    FAQ

    Can it be installed outdoors?
    Yes, the protection rating is IP65.
    Is a separate driver needed?
    No, it connects directly to 230 V AC mains.
    What colour is the light?
    neutral white, 4000 K.
    Can it be controlled by a twilight or motion switch?
    Yes, it works with any 230 V switch.
    Is it dimmable?
    No, the floodlight is not dimmable.
    What is the luminous flux?
    6000 lm.

    LED outdoor floodlight | 50W | 230V | 4000K | 6000lm | IP65 | Philips BVP164 LED60/84

    Philips BVP164 LED60/84 – 50 W, 6000 lm, 4000 K, IP65 LED floodlight for outdoor areas, façades and yards with direct 230 V connection.

    Published: 2026-11-14 · Data verified against manufacturer / supplier data: 2026-11-14

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Rechargeable LED work torch | 300/100lm | IP20 | 3,7V/2,2Ah | magnet | foldable | Brennenstuhl HL2 DA 61 M3H2 | 1175670
    Code: HL2DA61M3H2

    LED rechargeable work flashlight/floodlight designed for use in workshops, garages, vehicles, warehouses, technical rooms, or during repair work. Thanks to the main 300 lm light output and an additional 100 lm LED light source in the head, this floodlight allows convenient illumination of both wider work areas and narrower, harder-to-reach places.

    The built-in 3.7 V / 2.2 Ah lithium-ion battery, magnetic mounts, rotating hooks, and support foot adjustable up to 200° allow the flashlight to be used very flexibly – it can be placed, hung, or attached to a metal surface. It is a practical solution for electricians, mechanics, craftsmen, maintenance specialists, and household users. 

    Price 27.87 € VAT incl.
    ( 23.03 € VAT excl. )
    Price 10.92 € VAT incl.
    ( 9.03 € VAT excl. )
  • privacy policy

    Information