Products catalog

  • LED floodlight with motion sensor | 50W | 230V | 6500K | 5800lm | IP65 | Brennenstuhl | JARO 7060 P

    Code: 1171250542
    Barcode: 4007123684984

    Brennenstuhl JARO 7060 P – a bright and energy-saving LED outdoor floodlight with an integrated motion sensor, designed to reliably illuminate driveways, yards, warehouse areas, carports, or building entrances. The 5800 lm luminous flux, wide 115° beam angle, and IP65 protection ensure large-area, uniform, and durable lighting in all weather conditions. The adjustable PIR sensor (up to 10 m, ~180°) with dusk sensor and switch-on duration control allows automated lighting, energy saving, and increased site security. 

  • LED floodlight with motion sensor | 50W | 230V | 6500K | 5800lm | IP65 | Brennenstuhl | JARO 7060 P

    Brennenstuhl JARO 7060 P is an LED floodlight with a built-in PIR motion sensor: 5,800 lm of 6500 K cool white light and IP65 housing protection. It switches on when motion is detected and off after the set time.

    Key idea:
    The motion sensor and twilight sensor light the area only in the dark and only when someone is there – less electricity is used, and light switching on suddenly deters unwanted visitors. Suitable for yards, driveways and building perimeters.
    Power
    50 W
    Luminous flux
    5,800 lm
    Sensor
    PIR, up to 10 m
    Protection
    IP65

    Operating principle

    The floodlight is fixed to a wall or structure and connected to the 230 V mains. The sensor reacts to heat emitted by a person or vehicle – it works on the passive infrared (PIR) principle.

    When motion is detected (at 180°, up to 10 m), the floodlight switches on 5,800 lm of light, while the twilight sensor prevents it from switching on in daylight.

    The on-time after the last motion is adjustable: 10 s – 5 min.

    What makes JARO 7060 P useful?
    One product does two jobs: it lights the area when needed and works as a simple deterrent – without a separate sensor or extra wiring.

    Technical specifications

    Product type LED floodlight with motion sensor
    Manufacturer / series Brennenstuhl / JARO
    Model JARO 7060 P
    Product code 1171250542
    EAN 4007123684984
    Power 50 W
    Supply voltage 220–240 V AC
    Luminous flux 5.800 lm
    Colour temperature 6500 K
    Ingress protection IP65
    Luminous efficacy 144 lm/W
    Colour rendering index (CRI) 80–89
    Impact resistance IK08
    Sensor type PIR
    Detection angle ~180°
    Detection range 10 m
    Time setting 10 s – 5 min
    Housing Aluminium, tempered glass
    Colour Black
    Dimensions 195 × 215 × 45 mm
    Weight 1.03 kg

    Key features

    • Built-in PIR sensor – light switches on automatically, no switch needed.
    • Twilight sensor – the floodlight does not switch on in daylight.
    • Adjustable on-time – 10 s – 5 min.
    • IP65 housing – dust-tight and protected against water jets, suitable for exposed outdoor locations.
    • 6500 K cool white light – bright, high-contrast light for yards, car parks and work areas.

    Where is it used?

    • Private yards and driveways
    • Building perimeters and façades
    • Parking spaces
    • Warehouse and workshop access areas
    • Farm yards
    • Back areas of retail premises

    Use by need

    Homeowner.
    A lit driveway when you come home and extra protection at night.
    Electrician.
    Built-in sensor – no separate box or extra wiring needed.
    Small business.
    The back yard or warehouse door is lit only when there is motion.

    Practical application

    If the yard and driveway are dark at night and a permanently lit floodlight would use too much electricity, JARO 7060 P mounted on the façade switches on only when a car arrives or a person passes.

    Pros

    • Built-in PIR sensor and twilight sensor
    • Light only when needed – lower running costs
    • 5,800 lm luminous flux
    • IP65 protection
    • Connects directly to 230 V mains
    • Extra deterrent effect at night

    Cons / limitations

    • The sensor may react to cars, animals or heat sources – correct aiming is essential
    • The sensor does not work through glass or behind obstacles
    • All-night lighting requires additional control
    • Fixed colour temperature

    Safety and installation notes

    • Disconnect the power supply before installation and verify the line is dead.
    • Mount at a height where the sensor zone covers the passage; mounting too high reduces sensitivity.
    • Do not aim the sensor at a street, trees, ventilation openings or heaters – this causes false triggering.
    • The sensor detects a person walking across its zone better than one walking straight towards it.
    • Make outdoor connections in sealed boxes; earth the housing (PE).
    • Work on 230 V installations must be carried out by a qualified electrician.

    Quick selection guide

    50 W
    5,800 lm
    6500 K
    IP65
    PIR 10 m
    230 V
    Suitable when you need:
    • Automatic lighting without a switch
    • Lighting an entrance, yard or driveway when there is motion
    • An extra deterrent at night
    Check before use:
    • Whether the sensor zone covers the required passage or driveway
    • Whether there are heat sources or moving objects nearby (trees, street)
    • Whether the mounting height suits the sensor
    • Whether circuit protection matches the total load
    Important reminder: A floodlight with a motion sensor is not an alarm system – it lights and deters, but does not report an intrusion.

    FAQ

    Will the floodlight switch on in daylight?
    No, the twilight sensor allows it to switch on only at the set darkness level.
    How long does it stay on after motion?
    The on-time is adjustable: 10 s – 5 min.
    At what distance does the sensor detect motion?
    According to the manufacturer – up to 10 m, at 180°.
    Will the sensor react to cats or dogs?
    It may – a PIR sensor reacts to heat and movement, so sensitivity and direction are worth adjusting.
    Can it be installed outdoors?
    Yes, the IP65 housing is dust-tight and protected against water jets.
    Can several floodlights be connected to one circuit?
    Yes, each floodlight has its own sensor and is connected to the 230 V circuit individually.

    LED floodlight with motion sensor | 50W | 230V | 6500K | 5800lm | IP65 | Brennenstuhl | JARO 7060 P

    Brennenstuhl JARO 7060 P – 50 W, 5,800 lm, 6500 K, IP65 LED floodlight with built-in PIR motion sensor for automatic lighting of yards and driveways.

    Published: 2026-11-14 · Data verified against the manufacturer datasheet: 2026-11-14

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Rechargeable LED work light | 30W | 3200lm | IP54 | Brennenstuhl JARO 3010 MA | 1171250345
    Code: 1171250345

    Rechargeable mobile LED work floodlight designed for bright, reliable and energy-efficient lighting in places where there is no permanent power supply. With 30W power, 3200 lm luminous flux and 6500K daylight white color temperature, the floodlight ensures clear visibility during construction, repair, installation, maintenance or outdoor work.

    This portable LED work floodlight is suitable for use on construction sites, in garages, workshops, warehouses, car repair areas, households or for outdoor work. The integrated battery allows the floodlight to be used for up to 12 hours, while the USB-C charging port ensures convenient charging. 

    Price 82.28 € VAT incl.
    ( 68.00 € VAT excl. )
    Modular circuit breaker | 1P | 10A | B | 6kA | DIN | MCB | Schneider Electric | iC60N | A9F73110
    Code: A9F73110

    Modular circuit breaker designed to protect electrical circuits against overload and short circuit. This circuit breaker is mounted on a standard DIN rail, making it ideal for the protection of electrical circuits in residential houses, commercial premises, automation panels, and low-power electrical circuits. The circuit breaker is especially suitable for circuits where there are no high starting currents: lighting, control circuits, alarm systems, automation equipment, and low-power electrical consumers. 

    Price 4.27 € VAT incl.
    ( 3.53 € VAT excl. )
  • Subscribtion to new arrivals

    privacy policy

    Information