Products catalog

  • LED strip profile | 3m | surface-mounted | low | for strips up to 12 mm | 4772124004870

    Code: 008W 3m
    Barcode: 4772124004870

    Surface-mounted aluminium profile for LED strips, fixed directly to furniture, shelves, walls or ceilings. The profile protects the strip, dissipates heat, and the cover hides individual light points.

  • LED strip profile | 3m | surface-mounted | low | for strips up to 12 mm | 4772124004870

    Surface-mounted aluminium profile for LED strips, fixed directly to furniture, shelves, walls or ceilings. The profile protects the strip, dissipates heat, and the cover hides individual light points.

    Key point:
    The simplest way to install an LED strip neatly without milling or plastering – fix it, stick the strip in, snap on the cover.

    Technical specifications

    Product typeLED strip profile, surface-mounted, low
    Model / marking008W
    Barcode (EAN)4772124004870
    MaterialAluminium
    Cover (diffuser)Opal (milky), soft flexible PVC – even light diffusion
    Width18 mm
    Height6 mm
    Inner width (strip seat)13 mm
    Max. LED strip width12 mm
    Length3 m
    Set contentsProfile, cover, 4 end caps (with cable hole)
    Country of originChina
    CompliancePassive mechanical product without electrical parts – CE marking under the LVD/EMC directives does not apply. The LED strip and power supply must carry their own CE marking.

    Dimensions are taken from the supplier cross-section drawing (mm). Check the actual profile before milling or plastering.

    Main functions

    • Aluminium body dissipates heat from the LED strip and extends its life
    • Cover protects the strip from dust and touch
    • Neat, even light line without visible cables

    Where is it used?

    • Under-cabinet and worktop lighting in kitchens
    • Shelves, display cases, wardrobes
    • Accent lighting for stairs, corridors and niches
    • Shop and office furniture

    Installation

    • Fix the profile with clips or screws to a flat surface (clips sold separately)
    • Stick the LED strip to the clean, degreased profile base
    • Lead the cable through the end cap hole, then fit the cover
    • Cut the profile with a metal saw and deburr the edges

    Pros

    • Quick installation without construction work
    • Aluminium – good heat dissipation
    • Cover and end caps included

    Cons / limitations

    • Profile is visible on the surface
    • Strip width is limited – check the inner width

    Quick selection guide

    Choose this profile if:
    • you mount on furniture, shelves or a wall surface
    • you do not want to mill or plaster
    • the strip is not wider than 12 mm
    Choose another profile if:
    • the profile must be hidden in the surface – choose a recessed or plaster-in profile
    • you need to light a corner – choose a corner profile

    FAQ

    Are 10 mm and 12 mm LED strips suitable?
    Yes, if the strip width is up to 12 mm (inner width 13 mm).
    Can it be cut?
    Yes, the profile and cover are cut to length with an ordinary metal saw.

    Safety and installation notes

    • Power LED strips only with safety extra-low voltage (12/24 V DC) from a CE-marked power supply; the 230 V side must be connected by a qualified electrician.
    • Choose a power supply with at least 20 % power reserve.
    • Aluminium dissipates heat only when the profile is not covered by insulation and is in contact with air or a surface – do not plaster over the cover or block the ends.
    • Wear safety glasses when cutting the profile and remove swarf before sticking the strip.

    Concise technical description (LT / EN)

    LT: Profilis LED juostai | 3m | virštinkinis | žemas | juostai iki 12 mm | 4772124004870. Virštinkinis aliuminio profilis LED juostai, tvirtinamas tiesiai ant paviršiaus – baldų, lentynų, sienų ar lubų. Profilis apsaugo juostą, nuveda šilumą, o dangtelis paslepia atskirus šviesos taškus.
    EN: LED strip profile | 3m | surface-mounted | low | for strips up to 12 mm | 4772124004870. Surface-mounted aluminium profile for LED strips, fixed directly to furniture, shelves, walls or ceilings. The profile protects the strip, dissipates heat, and the cover hides individual light points.

    Keywords

    led strip profile, surface-mounted, low, for strips up to 12 mm, led profile, aluminium led channel, led strip profile, led profile with diffuser

    LED strip profile | 3m | surface-mounted | low | for strips up to 12 mm | 4772124004870

    The simplest way to install an LED strip neatly without milling or plastering – fix it, stick the strip in, snap on the cover. Order at elsprendimai.eu or pick up in Šiauliai, J. Basanavičiaus g. 23.

    Published: 2026-11-18 · Data verified against the supplier technical drawings: 2026-11-18

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

  • privacy policy

    Information