Products catalog

  • LED work light | spotlight | 250 lm + 70 lm | 3.7 V | 1 Ah | rechargeable | compact | portable | foldable | IP20 | Brennenstuhl | HL 200 A | 1175430010 | 4007123663149

    Code: 1175430010
    Barcode: 4007123663149

    Rechargeable LED work torch / spotlight designed for convenient lighting during repair, installation, maintenance, household or automotive work. Thanks to 4 ultra-bright SMD LEDs on the front, an additional 70 lm LED light source in the head, an integrated magnet and a 360° rotating hanging hook, this torch is a practical solution when working in places where free hands and directed lighting are required.

    The torch can be folded up to ±90°, allowing the light direction to be easily adjusted according to the workplace. The built-in 3.7 V / 1 Ah lithium-ion battery provides up to 3 hours of operating time, while the included USB cable allows convenient charging of the device. 

  • Technical specifications

    Manufacturer: Brennenstuhl
    Product type: LED work torch / work light
    Lamp type: hand lamp
    Main light source: 4 ultra-bright SMD LEDs
    Additional light source: 1 SMD LED in the lamp head
    Main luminous flux: 250 lm
    Additional light source luminous flux: 70 lm
    Battery technology: lithium-ion
    Battery type: built-in rechargeable battery
    Battery capacity: 1 Ah
    Battery voltage: 3.7 V
    Rechargeable: yes
    Charging time: approx. 2 hours
    Operating time: up to 3 hours with a fully charged battery
    Charging indicator: yes
    Switch: ON/OFF
    Adjustable head: up to ±90°
    Hanging hook: 360° rotatable, retractable
    Magnet: integrated
    Housing material: plastic
    Protection rating: IP20
    Impact resistance: IK07
    Height: 3.20 cm
    Length: 18.70 cm
    Width: 4.70 cm
    Weight: 0.17 kg
    Included: USB charging cable

    Functions

    Main 250 lm lighting – 4 ultra-bright SMD LEDs on the front provide wide and bright illumination of the working area.
    Additional 70 lm LED source – the LED located in the lamp head is suitable for narrower, directional lighting in hard-to-reach areas.
    Rechargeable lithium-ion battery – the integrated 3.7 V / 1 Ah battery allows the torch to be used without replaceable batteries.
    Up to 3 hours operating time – when fully charged, the torch can operate for up to 3 hours, depending on the selected mode.
    Fast USB charging – the battery is charged in approximately 2 hours using the included USB cable.
    Charging indicator – allows you to conveniently see the battery charging status.
    ON/OFF switch – simple switching on and off with one button.
    Foldable design up to ±90° – the direction of the light can be adjusted according to the work area.
    Integrated magnet – the torch can be attached to metal surfaces, keeping both hands free for work.
    360° rotatable hanging hook – allows the torch to be conveniently hung above the work area, in a garage, cabinet or vehicle.

    Use

    For household users: Suitable for use at home, in the garage, basement, storage room or car. It is useful when replacing a fuse, repairing a household appliance, illuminating a hard-to-reach corner or having a reliable light source during a power outage.

    For electricians: A convenient auxiliary light when working in electrical panels, poorly lit rooms, technical areas or near cable routes. The magnet and hook allow the torch to be fixed so that both hands remain free for work.

    For vehicle repair work: Thanks to the magnet, foldable design and compact size, the torch is especially convenient for illuminating the engine compartment, wheel arch, vehicle interior or underside. It is a practical tool both for car workshops and for drivers who want to keep an emergency torch in the vehicle.

    For engineers and maintenance specialists: The device is suitable for inspections, equipment checks, fault detection, service work and technical tasks in industrial, commercial or maintenance premises. The light weight of 0.17 kg allows the torch to be conveniently carried in a tool bag.

    For workshops and garages: Can be used as additional workplace lighting when drilling, assembling, arranging tools, working with metal, wood or small equipment.

    Advantages

    2 light sources – main 250 lm and additional 70 lm LED in the head
    Rechargeable battery – no need for replaceable batteries
    Compact and lightweight – only approx. 0.17 kg
    Integrated magnet – can be attached to metal surfaces
    360° rotatable hook – convenient for hanging at the workplace
    Foldable design up to ±90° – easy to direct the light
    Fast charging – approx. 2 hours

    Disadvantages

    IP20 protection rating means that the torch is not intended for use in rain, damp outdoor environments or places where water may enter.
    Operating time of up to 3 hours may be too short for long work without the possibility of charging.

    FAQ

    Where is this LED work torch used?
    It is used in garages, workshops, cars, storage rooms and technical rooms, as well as during repair, installation or inspection work.

    Is the torch rechargeable?
    Yes, it has a built-in lithium-ion battery and is charged with a USB cable.

    Can the light angle be adjusted?
    Yes, the torch can be folded up to ±90°, allowing the light to be directed where needed.

    Is it suitable for outdoor use?
    Only in dry conditions. Since the protection rating is IP20, the torch is not intended for use in rain or damp environments. 

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

  • Subscribtion to new arrivals

    privacy policy

    Information