Products catalog

  • Cabinet Lock for Electricity Meter Cabinets | Triangular Key T10 10 mm | M24 | L48 mm | No Key Included | ES-LT-APS-10T

    Code: ES-LT-APS-10T

    The ES-LT-APS-10T is a mechanical cabinet lock for electricity meter cabinets and distribution boards, secured with a standard 10 mm triangular (T10) key. It is fitted with an M24 thread, has an overall length of 48 mm, and fits the housings of SP1, AS and AAS type meter cabinets. It is used on doors of residential, staircase, telecom and industrial distribution boards where a simple, quickly installed lock is needed.

  • Cabinet Lock for Electricity Meter Cabinets | Triangular Key T10 10 mm | M24 | L48 mm | No Key Included | ES-LT-APS-10T

    The ES-LT-APS-10T is a mechanical cabinet lock for electricity meter cabinets and distribution boards, secured with a standard 10 mm triangular (T10) key. It is fitted with an M24 thread, has an overall length of 48 mm, and fits the housings of SP1, AS and AAS type meter cabinets. It is used on doors of residential, staircase, telecom and industrial distribution boards where a simple, quickly installed lock is needed.

    Key idea:
    Meter cabinet doors in Lithuania are locked as standard with a triangular key – this is not a high-security solution, but a matter of compatibility with the requirements of the network operator and construction codes. The ES-LT-APS-10T is chosen when a broken or missing lock needs replacing, or when a new cabinet needs to be fitted with a standard lock, without changing the door or housing – the M24 thread and 48 mm length match the hole dimensions used by most manufacturers, so installation takes only a few minutes.
    Key type
    Triangular T10 (10 mm)
    Thread
    M24
    Overall length
    L48 mm
    Operating temperature
    from -30 °C to +60 °C

    Operating principle

    The lock's mechanism is simple: the body, with its M24 thread, is fitted through a hole in the door from the inside of the cabinet, while only the round lock head with its triangular key socket is visible from the outside. When the 10 mm triangular key is inserted and turned, the sliding tongue or eccentric moves out of the groove in the door frame and releases the door; turning it back locks it again. Because it is secured from the inside (tightened by nut), the lock cannot be unscrewed without first opening the cabinet.

    This mechanism differs from other distribution board locks (keyed cylinder or coded locks) in that the key profile is standardised and identical across all products of the same class – it has no individual code or unique key set. This is a deliberate design choice: staff of the electricity network operator who service meter cabinets use the same triangular key shape throughout the network, so a single key opens a great many different cabinets.

    What makes the ES-LT-APS-10T useful?
    It allows a damaged or unsuitable lock to be replaced with a standard one without changing the door geometry – the M24 thread and L48 mm length match the opening of typical SP1/AS/AAS cabinets, so the old lock is simply unscrewed and the new one screwed into the same location.

    Technical specifications

    Model ES-LT-APS-10T
    Product type Mechanical lock for electricity meter cabinets
    Key type Triangular, 10 mm (T10)
    Thread M24
    Body height H24 mm
    Overall length L48 mm
    Installation Tightened from the inside of the cabinet
    Fits SP1 / AS / AAS type meter cabinets
    Operating temperature from -30 °C to +60 °C
    Environmental resistance Suitable for indoor and outdoor use
    Included No key included (T10 triangular key sold separately)

    Key features

    • Protection against unauthorised access – prevents the meter cabinet door from being opened freely without the triangular key.
    • Locks with a 10 mm triangular key – a standard profile used on most electricity distribution cabinets in Lithuania.
    • Quick installation – screwed in from the inside, with no additional fixing parts.
    • Compatible with typical cabinets – the M24 thread and L48 mm length match the opening of SP1/AS/AAS cabinets.
    • Durable construction – designed for long-term use indoors and outdoors.
    • Wide operating temperature range – works from -30 °C to +60 °C, suitable for unheated premises and outdoor cabinets.

    Where is it used?

    • Electricity meter cabinets in houses and apartment buildings
    • Meter cabinets in commercial and administrative buildings
    • Distribution boards in staircases and communal areas
    • Panels on outdoor electricity poles
    • Telecom, data transmission and fibre-optic cabinets
    • Industrial automation and alarm distribution boards

    Use according to need

    For residential users.
    If the old lock on a meter cabinet is worn out, the key has been lost, or the door no longer latches, the ES-LT-APS-10T is fitted in the same location – screwed in via the M24 thread – and a suitable triangular key must be ordered separately.
    For companies and industry.
    On newly built or renovated sites, this lock allows the locking of all meter and distribution cabinets to be standardised on a single key profile, making the maintenance staff's job easier.
    For electricians / engineers.
    Before installation, check the door opening dimensions and the body thickness – the M24 thread and L48 mm length must match the specific cabinet's construction; if the cabinet does not have a standard SP1/AS/AAS opening, the lock may not fit without an additional adapter.

    Practical application

    When the old lock on a meter cabinet in an apartment building staircase fails (the tongue no longer extends when the key is turned), the installer opens the cabinet's inner cover, unscrews the old M24 lock from the inside, and screws in the ES-LT-APS-10T in its place; the whole job, using a single wrench, takes about 10–15 minutes, and the door is once again secured with the same triangular key used by the network operator's staff.

    Pros

    • Standard key profile – the triangular T10 key is available to electricians and operators, with no need for individual key matching.
    • Direct replacement – the M24 thread and L48 mm length match the typical opening of SP1/AS/AAS cabinets.
    • Quick installation – screwed in from the inside with a single tool.
    • Wide operating temperature range – from -30 °C to +60 °C, suitable for outdoor use.
    • Fits most standard cabinets – no need to replace the door or housing.
    • Compact construction – a small body height of H24 mm does not interfere with other cabinet components.

    Cons / limitations

    • Not a high-security lock – the triangular key is standardised and widely available, so it protects against accidental or unauthorised opening, not against deliberate break-in.
    • Does not lock automatically when the door is closed – the key must be turned after closing so the tongue engages.
    • Sold without a key – the T10 triangular key is ordered separately, and the lock cannot be operated without it.
    • The body material is not specified by the manufacturer, so its resistance to mechanical damage is not defined.
    • Suitable only for SP1/AS/AAS and similarly shaped cabinets – doors of a different type may need a lock of a different length or thread.

    Safety and installation notes

    • Before installation, check that the diameter and thickness of the door opening match the M24 thread and L48 mm length.
    • Carry out installation with the cabinet open from the inside – the lock is tightened, not hammered in.
    • Before working on the meter cabinet, make sure you do not touch any live parts behind the lock.
    • Make sure the key used exactly matches the triangular profile dimensions (T10, 10 mm) – an unsuitable key can damage the mechanism.
    • In outdoor conditions, check the lock's operation regularly – sand or moisture can hinder the tongue's movement.
    • Do not use excessive force when turning the key – if the mechanism sticks, check the door alignment.

    Quick selection guide

    Key type
    Triangular T10 (10 mm)
    Thread
    M24
    Overall length
    L48 mm
    Operating temperature
    from -30 °C to +60 °C
    Suitable when you need:
    • to replace a damaged or missing meter cabinet lock with a standard one;
    • to lock an SP1/AS/AAS type board with a triangular key;
    • to fit out a new cabinet with a standard lock used by the network operator.
    Check before use:
    • whether the door opening dimension matches the M24 thread and L48 mm length;
    • whether you have, or have separately ordered, a T10 (10 mm) triangular key;
    • whether the cabinet is SP1/AS/AAS or a similar standard geometry;
    • whether the lock will be used indoors or outdoors (temperature range -30…+60 °C).
    Important reminder:
    The lock protects only against accidental or unauthorised free opening of the door by persons without a standard triangular key – it is not protection against deliberate break-in or mechanical damage to the door, since the key profile is widely known and available to specialised users.

    FAQ

    Does the lock protect against break-in?
    No – it protects against accidental or unauthorised free opening, since the triangular key is standardised and known to electricians; it does not protect against deliberate break-in.
    Is a key included?
    No, the lock is sold without a key – the T10 (10 mm) triangular key must be purchased separately.
    Which cabinets does it fit?
    SP1, AS and AAS type electricity meter cabinets with an M24 thread opening and an overall length of up to 48 mm.
    Can it be installed outdoors?
    Yes, the lock is designed for indoor and outdoor use, with an operating temperature from -30 °C to +60 °C.
    Does the door lock itself when closed?
    No, after closing the door the key must be turned so the tongue engages the groove in the frame.
    How is it installed?
    The lock is tightened from the inside of the cabinet via the M24 thread – unscrewing the old lock and screwing in the new one takes only a few minutes.

    Cabinet Lock for Electricity Meter Cabinets | Triangular Key T10 10 mm

    The ES-LT-APS-10T is a mechanical lock for electricity meter cabinets and distribution boards, locked with a triangular 10 mm (T10) key and fitted with an M24 thread, with an overall length of 48 mm. It is designed for SP1/AS/AAS type meter cabinets in residential, commercial and industrial premises where a standard, quickly replaceable lock is needed; sold without a key.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Steel hermetic distribution enclosure | 20 modules (2×10) | 400×300 mm | surface-mounted | with inner panel and DIN rails | lockable | IP66 | 4772124002814
    Code: IP66-20

    Surface-mounted steel enclosure for 20 modular devices (2 rows of 10) with a metal inner panel and two 35 mm DIN rails. Gasketed lockable door, IP66 ingress protection and IK08 impact resistance – suitable for power distribution outdoors, in industry and in damp rooms.

    Price 86.39 € VAT incl.
    ( 71.40 € VAT excl. )
  • privacy policy

    Information