Products catalog

  • Steel hermetic distribution enclosure | 20 modules (2×10) | 400×300 mm | surface-mounted | with inner panel and DIN rails | lockable | IP66 | 4772124002814

    Code: IP66-20
    Barcode: 4772124002814

    Surface-mounted steel enclosure for 20 modular devices (2 rows of 10) with a metal inner panel and two 35 mm DIN rails. Gasketed lockable door, IP66 ingress protection and IK08 impact resistance – suitable for power distribution outdoors, in industry and in damp rooms.

  • Steel hermetic distribution enclosure | 20 modules (2×10) | 400×300 mm | surface-mounted | with inner panel and DIN rails | lockable | IP66 | 4772124002814

    Surface-mounted steel enclosure for 20 modular devices (2 rows of 10) with a metal inner panel and two 35 mm DIN rails. Designed for MCBs, RCDs, contactors and other modular equipment where a plastic box is too weak or not tight enough – outdoors, in production halls and farm buildings.

    Key point:
    This enclosure is made for places with moisture, dust or mechanical impact. With the gasketed door closed the housing meets IP66, while the inner panel covers the terminals: device toggles are accessible, live parts are not. The lockable door keeps unauthorised persons out.
    Modules
    20 (2 × 10)
    Protection
    IP66 · IK08
    External dimensions
    400 × 300 mm
    Housing
    Steel, lockable door

    How it works

    The housing is fixed to a wall or structure (surface mounting). Modular devices are mounted on two 35 mm DIN rails – up to 20 modules of 18 mm in total, 10 per row.

    A metal inner panel (front plate) with cut-outs is placed over the devices: only the toggles show through, while terminals, busbars and wires stay covered. Unused cut-outs are closed with blanking strips.

    With the gasketed outer door closed and locked, the enclosure is protected against dust and powerful water jets (IP66), and the steel shell withstands IK08 impacts.

    Why choose this enclosure?
    You get double protection: the outer door protects against the environment and unauthorised access, the inner panel against accidental contact with live parts during operation.

    Technical specifications

    Product type Steel hermetic modular distribution enclosure
    Mounting Surface-mounted (on a wall or structure)
    Housing material Powder-coated steel
    External dimensions (H × W) 400 × 300 mm
    Number of modules 20 (2 rows of 10)
    Mounting rails 2 × DIN 35 mm
    Inner panel Metal, with cut-outs for modular devices
    Door Metal, solid (non-transparent), with sealing gasket and lock
    Ingress protection (IP) IP66 (door closed)
    Impact resistance (IK) IK08
    Barcode (EAN) 4772124002814

    Main features

    • 20 modules in two rows – room for a main switch, an RCD and circuit breakers for a flat, a country house or a machine.
    • IP66 sealing – the enclosure can be installed outdoors, in wash-down areas and dusty halls.
    • Steel housing, IK08 – withstands knocks and accidental impacts in an active work area.
    • Inner panel – devices are operated without exposing live parts.
    • Lockable door – only authorised personnel can reach the devices.
    • Standard 35 mm DIN rails – fits modular equipment from any manufacturer.

    Where is it used?

    • Outdoor distribution boards at houses, country homes and farm buildings
    • Power supply for pump stations, boreholes and wastewater treatment units
    • Production halls, workshops, warehouses
    • Livestock farms, greenhouses and other agricultural buildings
    • Temporary construction site power points
    • AC-side protection of solar power plants
    • Supply protection for EV charging stations
    • Car washes, basements and other damp rooms

    Use by need

    For the electrician.
    A ready base: DIN rails and inner panel are already fitted – just add the devices and connect the cables.
    For the farm or country-house owner.
    A board outdoors or in a barn that is not bothered by moisture, dust or outsiders.
    For the plant energy engineer.
    A local distribution point next to a machine in a production area where a plastic housing would soon crack.

    Practical example

    If you need to supply a pump, lighting and sockets from a board on the wall of a farm building, this enclosure takes a main switch and an RCD and still leaves room for 10 or more circuit breakers. Sealed cable glands and a locked door protect against rain, dust and outsiders.

    Pros

    • IP66 – suitable for outdoor and damp locations
    • Steel housing, IK08 impact resistance
    • 20 modules – enough for main switch, RCD and circuits
    • Inner panel protects against contact with live parts
    • Lockable door
    • DIN rails already installed

    Cons / limitations

    • Heavier than a plastic box – requires a solid base and suitable fixings
    • Solid door – the board must be opened to check device status
    • The metal housing and door must be earthed (PE)
    • IP66 is maintained only with sealed cable entries

    Safety and installation notes

    • Installation and connection must be carried out by a qualified electrician with the supply disconnected.
    • Connect the housing and door to the protective conductor (PE).
    • Bring cables in only through IP66 or higher rated glands; seal unused openings.
    • Do not drill extra openings in the top wall – water collects there; cables are best routed from below.
    • Close unused cut-outs in the inner panel with blanking strips.
    • Before closing, check that the door gasket is clean and undamaged – tightness depends on it.

    Quick selection guide

    20 modules
    2 × DIN 35 mm
    400 × 300 mm
    IP66
    IK08
    Steel
    Lockable
    Suitable when you need:
    • a board outdoors, in a damp or dusty environment
    • up to 20 modules of devices in one place
    • a mechanically robust, lockable housing
    Check before use:
    • whether 20 modules are enough with spare room for expansion
    • whether the housing depth suits your devices (contactors, meters) – if in doubt, ask us
    • which cable glands and N/PE terminal blocks you will need
    Important reminder: the enclosure is a housing – it does not protect circuits by itself. Protection is provided by correctly selected and installed devices.

    FAQ

    Can the enclosure be installed outdoors?
    Yes, IP66 allows outdoor installation provided the cable entries are sealed and the door is closed.
    How many circuit breakers fit?
    20 modules of 18 mm fit, e.g. 20 single-pole or 10 two-pole devices.
    Are the DIN rails already installed?
    Yes, the enclosure has two fitted 35 mm DIN rails and an inner panel.
    Can it be flush-mounted?
    No, the enclosure is designed for surface mounting on a wall or structure only.
    Does the metal housing need earthing?
    Yes, the housing and door must be connected to the PE protective conductor.
    Is it suitable for three-phase devices?
    Yes, three-phase modular devices also fit – space is counted in modules.

    Steel hermetic distribution enclosure | 20 modules (2×10) | 400×300 mm | surface-mounted | with inner panel and DIN rails | lockable | IP66 | 4772124002814

    Surface-mounted IP66 steel enclosure for 20 modular devices with two DIN rails, an inner panel and a lockable door – a robust power distribution solution for outdoor, industrial and damp locations.

    Published: 2026-11-09 · Data updated: 2026-11-09

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Mushroom push button STOP | 22 mm | 1NC | red | IP40 | latching | Promfactor Baltic | FP CM r
    Code: FP CM r

    Mushroom push button STOP Ø 22 mm, 1NC, red, IP40, Promfactor Baltic FP CM r. For control circuits: AC-15 6 A / DC-13 0.6 A, Ui 660 V.

    Price 4.25 € VAT incl.
    ( 3.51 € VAT excl. )
    Single-cable membrane entry flange | for Ø86 mm hole | cable Ø55–70 mm | flange Ø123.1 mm | grey | IP67 | HT Hi Tech Polymers | HTX-1
    Code: Sandariklis HTX-1

    HTX-1 is a membrane entry flange for one thick power cable Ø55–70 mm. It fits a round Ø86 mm hole in the enclosure wall, flange diameter Ø123.1 mm. Sealing rating is IP67 according to the latest manufacturer's sheet.

    Price 21.78 € VAT incl.
    ( 18.00 € VAT excl. )
    Cable gland with locknut and gasket | PG7 | for cable Ø3–6.5 mm | grey | IP68 | 4772124000810
    Code: 00810

    Plastic PG7 cable gland with locknut and gasket for routing Ø3–6.5 mm round cables into distribution boards and junction boxes. Provides IP68 sealing when correctly installed.

    Price 0.20 € VAT incl.
    ( 0.17 € VAT excl. )
    Cable entry plate for two heavy cables | 216×100 mm | 2× Ø14–64 mm | black | IP65 | HIK-2
    Code: HIK-2

    HIK-2 cable entry plate – 216×100 mm, black, with two identical entries for cables Ø14–64 mm. Designed to bring two heavy power cables through a single opening in the board enclosure. Degree of protection IP65 (EN 60529).

    Price 32.21 € VAT incl.
    ( 26.62 € VAT excl. )
    Extended push button | 22 mm | 1NO | green | plastic | non-illuminated | IP40 | non-latching | Promfactor Baltic | FP PCPB gr Start Pl
    Code: FP PCPB gr Start Pl

    Extended push button Ø 22 mm, 1NO, green, IP40, Promfactor Baltic FP PCPB gr Start Pl. For control circuits: AC-15 6 A / DC-13 0.6 A, Ui 660 V.

    Price 2.12 € VAT incl.
    ( 1.75 € VAT excl. )
    Price 5.32 € VAT incl.
    ( 4.40 € VAT excl. )
  • privacy policy

    Information