LP1K mini contactor | 3P | 6A | 2,2kW | 24VAC coil | 1NO auxiliary contact | for electric motors and control circuits

LP1K mini contactor – 3P, 6A, 2.2kW, 24V DC coil, 1NO auxiliary contact

Mini contactor designed for the control of electric motors, pumps, fans, heating, lighting, and other automation circuits. The contactor features a 3-pole main power circuit, is rated for loads up to 6A, includes a 24V DC control coil, and features one integrated 1NO normally open auxiliary contact. Its compact design allows for convenient installation in control cabinets and restricted spaces.

• Electric motor control – for starting and stopping small and medium power motors.
• Pump control panels – for water supply, drainage, circulation, and technological pump control.
• Ventilation systems – to control fans, air supply, and exhaust equipment.
• Heating and lighting systems – for switching loads based on a thermostat, timer, relay, or controller signal.
• Automation cabinets – when using 24V DC PLCs, sensors, or relay outputs for control.
• Equipment modernization – for replacing worn-out or faulty contactors of a similar type.

For example, the contactor can be installed in a pump control panel. The main three-phase motor circuit is connected via the contactor power contacts, and the 24V DC coil is controlled by a float switch, pressure relay, PLC controller, or other automation device.

The integrated 1NO auxiliary contact can be used for latching – to keep the contactor engaged after the start button is released – or to send a signal to a PLC, an indicator light, or another control circuit function.

Electrician: A convenient contactor for control cabinets, motor starting circuits, fan, pump, heating, and lighting load switching. Compact size helps save space in the panel.

Automation Engineer: The 24V DC control coil allows for easy use of the contactor alongside PLCs, relay outputs, sensors, timers, and other automation components.

Industrial and Farm Specialist: Suitable for use in equipment control systems where reliable switching of motors, pumps, fans, or other electrical loads is required.

Maintenance Specialist: Can be used as a replacement for a similar contactor model, provided that the coil voltage, contact configuration, current, mounting method, and load parameters are verified beforehand.

The contactor is an electrical control component, therefore it must be selected and installed according to the specific electrical diagram, load type, control voltage, and applicable electrical safety requirements.

• Installation must be performed by a qualified electrician.
• Before installation or maintenance work, disconnect the power supply and verify that the circuit is dead.
• The control coil must only be powered by 24V DC.
• Check terminal markings against the contactor diagram and manufacturer documentation before connecting.
• Ensure appropriate protection against overload and short circuits in motor circuits.
• Do not exceed the 6A rated current and evaluate inrush, inductive, and other transient currents.
• When replacing an old contactor, verify the number of poles, coil voltage, auxiliary contact configuration, load, and physical mounting method.

Quick selection guide

This mini contactor is suitable when you need a compact 3-pole contactor with a 24V DC coil, rated for loads up to 6A and motors up to 2.2kW. It is especially relevant for automation cabinets, pump, fan, and motor control circuits.

Compact contactor for professional control circuits

The mini contactor is a practical solution for controlling motors, pumps, fans, heating, and other electrical loads. The 3-pole power circuit, 6A rated current, 24V DC coil, and 1NO auxiliary contact allow it to be used in various automation and control cabinets.

Before selecting a contactor, it is essential to verify the control coil voltage, load current, motor power, auxiliary contact requirements, and intended protection measures to safely adapt the device to your specific electrical diagram.