Protective cover for motor protection circuit breaker | FMP32 | without push button | plastic | IP55 | BF-1 | Promfactor Baltic | BF1
Code: BF1Price 10.06 € VAT incl.( 8.31 € VAT excl. )BF1 – IP55 plastic cover without push button for the FMP32 motor protection circuit breaker (0.16–25 A), for local protection of a pump or fan motor without a panel.
-
Protective cover for motor protection circuit breaker | FMP32 | without push button | plastic | IP55 | BF-1 | Promfactor Baltic | BF1
BF1 (BF-1) – a Promfactor Baltic plastic protective cover without push button for FMP32 motor protection circuit breakers. Degree of protection IP55, operating temperature -25…+55 °C – FMP32 can be installed at the motor or equipment without a separate panel.
Key idea:
FMP32 itself is designed for a panel, so it must not be mounted exposed at the machine. BF1 encloses the circuit breaker in an IP55 housing – the result is a compact local motor protection and isolation point; when a STOP push button in the lid is needed, BFS1 is chosen.Compatibility
FMP32 (0.16–25 A)Degree of protection
IP55Control
without a push button in the coverOperating temperature
-25…+55 °COperating principle
The cover is surface-mounted – on a wall, structure or equipment frame; the FMP32 motor protection circuit breaker is installed in it, and the supply and motor cables are brought in through sealed glands.
With the cover closed, FMP32 is protected against dust and water splashes (IP55); the breaker continues to provide overload and short-circuit protection as well as manual switching on and off of the motor.
Result – a local motor protection point at a pump, fan or machine tool when a STOP push button in the cover is not needed or the motor is controlled by other means.
Benefits BF1?
The simplest way to install FMP32 at the motor in IP55 conditions – without a separate panel and without an unnecessary STOP push button.Technical specifications
Product type Protective cover (enclosure) without push button Manufacturer / code Promfactor Baltic / BF1 (BF-1) Compatibility FMP32 motor protection circuit breakers (FMP0025–FMP2500) Housing material plastic Degree of protection IP55 Installation surface Operating temperature -25…+55 °C Storage temperature -25…+70 °C Altitude above sea level up to 2000 m Manufacturer warranty 5 years; service life of at least 15 years Main functions
- IP55 housing – protects FMP32 against dust and water splashes at the equipment.
- Designed for FMP32 – suitable for the entire FMP32 range from 0.16 to 25 A.
- No push button in the lid – a simpler and cheaper option when a STOP push button is not needed.
- Surface mounting – the breaker is installed right next to the motor without a panel.
- Operating temperature -25…+55 °C – suitable for unheated rooms and attics.
Where is it used?
- Local protection of a pump or fan
- Compressors and hydraulic power units
- Agricultural fans, screw conveyors, conveyors
- Conveyors in warehouses
- Water borehole pumps in plant rooms
- Motor maintenance switch at the equipment (for isolation during repair)
On-demand operation
For installers of pumping stations and boreholes.
Together with FMP32, BF1 forms IP55 local pump motor protection without a separate panel.For ventilation system installers.
FMP32 in a BF1 cover at the fan serves as a local maintenance switch with overload protection.For farm electricians.
enclosure without a push button – a simple solution for screw conveyors and conveyors controlled from a central panel.Practical application
If the 0.75 kW 400 V motor of a roof fan (approx. 1.9 A) is controlled from the central panel but needs local isolation and protection, then FMP0250 (1.6–2.5 A) is installed in a BF1 cover next to the fan under a canopy.Application guide: how it is used in practice
BF1 with FMP32 – local motor protection; only the FMP32 range is selected according to the motor current:
Site What is connected Result Installer's note Borehole pump in a plant room FMP32 according to the motor In in a BF1 cover Protection and isolation at the pump Route cables through sealed glands Roof fan FMP32 in a BF1 cover next to the fan Local maintenance switch In locations exposed to direct rain, use a canopy Grain auger or conveyor FMP32 + control from the central panel IP55 dust protection Match the setting to the current on the motor rating plate When a STOP push button is needed Instead of BF1 – BFS1 with a STOP push button Quick stop without opening the cover BFS1 – for the same FMP32 How to select the enclosure and FMP32 breaker
Requirement / motor current Recommended model Cover without push button, IP55 BF1 (BF-1) ← this model Enclosure with STOP button, IP55 BFS1 (BFS-1, with STOP push button) Motor current 0.16–0.25 A FMP0025 (FMP32 0.16–0.25 A) Motor current 0.25–0.4 A FMP0040 (FMP32 0.25–0.4 A) Motor current 0.4–0.63 A FMP0063 (FMP32 0.4–0.63 A) Motor current 0.63–1 A FMP0100 (FMP32 0.63–1 A) Motor current 1–1.6 A FMP0160 (FMP32 1–1.6 A) Motor current 1.6–2.5 A FMP0250 (FMP32 1.6–2.5 A) Motor current 2.5–4 A FMP0400 (FMP32 2.5–4 A) Motor current 4–6.3 A FMP0630 (FMP32 4–6.3 A) Motor current 6–10 A FMP1000 (FMP32 6–10 A) Motor current 9–14 A FMP1400 (FMP32 9–14 A) Motor current 13–18 A FMP1800 (FMP32 13–18 A) Motor current 17–23 A FMP2300 (FMP32 17–23 A) Motor current 20–25 A FMP2500 (FMP32 20–25 A) Rule: the enclosure suits only FMP32 (up to 25 A); if a STOP push button is needed at the motor – choose BFS1, and FMP80 (25–80 A) does not fit these enclosures.When to choose another solution: enclosure with a STOP push button – BFS1; FMP32 motor protection circuit breakers (FMP0025–FMP2500); auxiliary contacts F/ACT111, F/ACT120, F/ACS111, F/ACS120; alarm contacts F/ALCS; releases F/SRS230, F/SRS400, F/UVS230, F/UVS400; motor starters in boxes – SKM series.Pros
- IP55 protection against dust and water splashes
- Suitable for the entire FMP32 range
- Simpler than BFS1 when a STOP push button is not needed
- Plastic housing
- Operating temperature -25…+55 °C
Cons / limitations
- Suitable only for FMP32 – FMP80 (25–80 A) does not fit
- No STOP push button in the cover – BFS1 is intended for that
- FMP32 breaker and cable glands are ordered separately
- Locations exposed to direct rain require an additional canopy
Safety and installation notes
- Installation and connection must be carried out by a qualified electrician with the power disconnected.
- Before opening the enclosure, disconnect the supply upstream of FMP32 – there is 400 V at the terminals.
- Route the cables in through suitable sealed glands to maintain IP55.
- Set the FMP32 to the motor rated current from the motor nameplate.
- Connect the protective conductor (PE) to the motor and equipment housing.
Quick selection guide
FMP32IP55without a push buttonplastic-25…+55 °CsurfaceSuitable when you need:- FMP32 needs to be mounted at the motor without a separate control panel;
- there is dust or water spray at the installation location;
- No STOP push button is needed in the cover.
Check before use:- whether the motor current falls within the FMP32 range (up to 25 A);
- whether a STOP push button is needed (then – BFS1);
- the size and number of cable entries.
Important reminder: BF1 is designed only for FMP32; the FMP32 circuit breaker is not included and is ordered separately according to the motor current.FAQ
Which circuit breakers is BF1 suitable for?
BF1 is designed for Promfactor FMP32 motor protection circuit breakers from 0.16 to 25 A.What is the enclosure protection rating?
The degree of protection of the cover is IP55.What is the difference between BF1 and BFS1?
BF1 has no push button in the lid, while BFS1 has a STOP push button.Is the FMP32 breaker included?
No, the FMP32 switch is ordered separately according to the motor rated current.What material is the cover made of?
The cover is made of plastic.At what temperature can BF1 be used?
The enclosure is designed for operation at temperatures from -25 to +55 °C.Protective cover for motor protection circuit breaker | FMP32 | without push button | plastic | IP55 | BF-1 | Promfactor Baltic | BF1
Promfactor Baltic BF1 (BF-1) – IP55 plastic protective enclosure without a push button for the FMP32 motor protection circuit breaker (0.16–25 A) – for local protection of pump, fan and conveyor motors without a separate panel.
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.ManufacturerThis product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Transparent square protective window cover | 107×124×33 mm | IP67 | for distribution boxes | NTL1086Code: NTL1086Transparent hinged square protective window for devices, 107×124×33 mm, IP67. Mounted in a cut-out in the lid of a board or enclosure.
Price 15.84 € VAT incl.( 13.09 € VAT excl. )Plastic surface-mounted hermetic electrical distribution panel | box | 16 modules | halogen-free | with sealing option | 210x300x130mm | transparent doors | IP65 | TEMCode: 920.2130.132.016The plastic surface-mounted hermetic electrical distribution panel (model TEM 920.2130.132.016) is specifically designed to ensure efficient electricity distribution and safety in various industrial and commercial environments. This panel is made of high-quality plastic, which is lightweight yet durable and resistant to external environmental factors.
Price 27.72 € VAT incl.( 22.91 € VAT excl. )Transparent protective window cover for modular devices | 16 modules | 304×95×28 mm | IP67 | for distribution boxes | NTL1016Code: NTL1016Transparent hinged protective window for 16-module devices, 304×95×28 mm, IP67. Mounted in a cut-out in the lid of a distribution board or enclosure.
Price 27.19 € VAT incl.( 22.47 € VAT excl. )









