Products catalog

  • Transparent square protective window cover | 107×124×33 mm | IP67 | for distribution boxes | NTL1086

    Code: NTL1086

    Transparent hinged square protective window for devices, 107×124×33 mm, IP67. Mounted in a cut-out in the lid of a board or enclosure.

  • Transparent square protective window cover | 107×124×33 mm | IP67 | for distribution boxes | NTL1086

    NTL1086 is a transparent hinged window mounted in a cut-out in the lid of an electrical distribution board, enclosure or control cabinet. Through it you see the front panel of the device behind it – a meter, gauge, thermostat, buttons or indicators – and by lifting the lid you can operate the device without opening the whole board.

    Key point:
    Outdoors or in a damp room, opening the board every time you need to read a meter or controller is both a risk and a hassle. The window lets you see and operate the devices, while the closed lid with IP67 protection keeps out dust and water.
    Shape
    square window
    Dimensions
    107×124×33 mm
    Protection class
    IP67
    Lid
    transparent PC, hinged

    How it works

    A cut-out is made in the lid of the board or enclosure and the window frame is fitted and fixed in it. The device is positioned in the board so that its front panel is within the window area.

    The transparent polycarbonate lid lets you check the status of the devices at any time: what the meter or device display shows, whether indicators are lit.

    When the device needs to be operated, the latch is released and the lid is lifted. Once the lid is closed and latched, sealing is restored.

    Why choose NTL1086?
    An outdoor or damp-room board becomes as convenient as an indoor consumer unit – you see and operate the devices, they stay protected, and the board itself is not opened unnecessarily.

    Technical specifications

    Product type Transparent hinged square protective window for devices
    Code NTL1086
    Shape Square
    Outer dimensions 107×124×33 mm
    Protection class IP67 (when properly installed, lid closed)
    Lid material Transparent polycarbonate (PC)
    Lid type Hinged, with latch
    Mounting In a cut-out in the lid / wall of a board, enclosure or cabinet
    Compliance CE, RoHS
    Series NTL – 2–18 module windows also available for modular devices

    Main functions

    • Visible devices – device readings and status can be checked without opening the board.
    • Quick access – lifting the lid gives access to device toggles and buttons.
    • IP67 protection – the closed lid protects the devices against dust and water.
    • Transparent polycarbonate – a robust, clear material that does not obscure readings.
    • Preserved enclosure sealing – the board is not opened unnecessarily, so less moisture and dirt get inside.
    • Neat appearance – the device is visible yet protected behind a single window.

    Where is it used?

    • Outdoor distribution boards at houses, in yards, on poles
    • Sealed enclosures for EV charging, yard lighting and gate automation circuits
    • AC boards of solar power plants
    • Damp rooms: basements, boiler rooms, pump rooms, saunas
    • Farm buildings, livestock farms, warehouses
    • Industrial control cabinets and construction site boards

    Use by need

    For electricians.
    Turns a sealed enclosure into a distribution board with visible and accessible devices – without a special enclosure with a door.
    For home or farmstead owners.
    Read a meter or controller in an outdoor board without opening it, even in the rain.
    For panel builders.
    Together with NTL series modular windows (2–18 modules), a complete outdoor board can be assembled.

    Practical example

    If an outdoor board houses a meter or temperature controller, every reading means unscrewing the lid and risking water getting inside. With NTL1086 installed, readings are visible immediately, and the device can be operated in seconds by lifting the lid.

    Pros

    • Devices visible without opening the board
    • Quick access to device controls
    • IP67 protection with the lid closed
    • Transparent PC lid
    • Suitable for sealed enclosures and cabinets
    • Suitable for square-format devices

    Cons / limitations

    • A cut-out must be made in the enclosure – additional installation work
    • IP67 is maintained only with an accurate cut-out and a closed lid
    • The device must be precisely aligned with the window
    • The device front panel must fit within the window opening

    Safety and installation notes

    • Check the exact cut-out dimensions against the product before cutting.
    • The cut-out must be clean, without cracks or chips, otherwise sealing will suffer.
    • Align the device so that its buttons or knobs do not press against the lid.
    • After installation, check that the lid closes and latches freely.
    • Carry out electrical installation work only with the power off.
    • Do not close the lid if there are wires or foreign objects between it and the frame.

    Quick selection guide

    square
    107×124×33 mm
    IP67
    transparent PC lid
    Suitable when you need to:
    • see and operate a device outdoors or in damp conditions;
    • turn a sealed enclosure into a convenient distribution board;
    • keep the board sealed while checking devices often.
    Check before use:
    • whether the device front panel fits the window (2–18 module windows available for modular devices);
    • whether a 107×124 mm window fits in the enclosure lid;
    • whether the device can be positioned exactly behind the window.
    Important reminder: the window is not the board itself – it needs an enclosure to be mounted in, and sealing depends on an accurate cut-out.

    FAQ

    Which devices is the window for?
    Square-format devices, e.g. meters, gauges, thermostats or control panels.
    Can the device be operated without opening the board?
    Yes, lifting the window lid gives access to the device buttons.
    Is it suitable for outdoor use?
    Yes, the IP67 rating is intended for outdoor and damp environments when the window is properly installed.
    What is the window mounted in?
    In a cut-out in the lid of a distribution board, sealed enclosure or cabinet.
    Are other sizes available?
    Yes, for modular devices the NTL series includes 2–18 module windows.
    What are the window dimensions?
    107×124 mm, depth 33 mm.

    Transparent square protective window cover IP67 NTL1086

    Hinged transparent polycarbonate square window for devices, 107×124×33 mm, IP67 – mounted in the lid of a board or sealed enclosure so that meters and controllers stay visible and accessible without opening it.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Plastic surface-mounted hermetic electrical distribution panel | box | 16 modules | halogen-free | with sealing option | 210x300x130mm | transparent doors | IP65 | TEM
    Code: 920.2130.132.016

    The plastic surface-mounted hermetic electrical distribution panel (model TEM 920.2130.132.016) is specifically designed to ensure efficient electricity distribution and safety in various industrial and commercial environments. This panel is made of high-quality plastic, which is lightweight yet durable and resistant to external environmental factors.

    Price 27.72 € VAT incl.
    ( 22.91 € VAT excl. )
    Transparent protective window cover for modular devices | 16 modules | 304×95×28 mm | IP67 | for distribution boxes | NTL1016
    Code: NTL1016

    Transparent hinged protective window for 16-module devices, 304×95×28 mm, IP67. Mounted in a cut-out in the lid of a distribution board or enclosure.

    Price 27.19 € VAT incl.
    ( 22.47 € VAT excl. )
    Transparent protective window cover for modular devices | 2 modules | 100×57×28 mm | IP67 | for distribution boxes | NTL1002
    Code: NTL1002

    Transparent hinged protective window for 2-module devices, 100×57×28 mm, IP67. Mounted in a cut-out in the lid of a distribution board or enclosure.

    Price 11.27 € VAT incl.
    ( 9.31 € VAT excl. )
  • Subscribtion to new arrivals

    privacy policy

    Information