Products catalog

  • Protective enclosure with STOP button for motor protection circuit breaker | FMP32 | 147×92×152 mm | IP55 | Promfactor Baltic | BFS1

    Code: BFS1
    Barcode: 4779040157734

    BFS1 – IP55 plastic enclosure with STOP button for the FMP32 motor protection circuit breaker, 147×92×152 mm, for a local motor starter next to a machine or pump.

  • Protective enclosure with STOP button for motor protection circuit breaker | FMP32 | 147×92×152 mm | IP55 | Promfactor Baltic | BFS1

    BFS1 (BFS-1) – a Promfactor Baltic plastic protective enclosure (box) with a STOP button for the FMP32 motor protection circuit breaker. Degree of protection IP55, dimensions 147×92×152 mm – the FMP32 can be mounted directly next to the motor or equipment, without a separate panel.

    Key idea:
    The FMP32 itself is IP20, so it cannot be mounted exposed next to the equipment. BFS1 encloses the breaker in an IP55 housing, and the STOP button in the cover allows the motor to be switched off without opening the enclosure – the result is a local motor starter with protection.
    Compatibility
    FMP32 (0.16–25 A)
    Degree of protection
    IP55
    Dimensions
    147×92×152 mm
    Control
    STOP push button in the cover

    Operating principle

    The enclosure is surface-mounted – on a wall, structure or equipment frame; the FMP32 motor protection circuit breaker is mounted inside, and the supply and motor cables are routed in through sealed glands.

    With the cover closed, FMP32 remains protected against dust and water splashes (IP55), and the STOP push button in the cover mechanically switches off the breaker – the motor can be stopped quickly without opening the enclosure.

    Result – a compact local motor control and protection point with overload and short-circuit protection from FMP32, suitable for workshops, warehouses and agricultural sites.

    Benefits BFS1?
    No separate control panel needed for a single motor: FMP32 + BFS1 form an IP55 local motor starter with a STOP push button.

    Technical specifications

    Product type Protective enclosure (box) with STOP button
    Manufacturer / code Promfactor Baltic / BFS1 (BFS-1)
    Compatibility FMP32 motor protection circuit breakers (FMP0025–FMP2500)
    Housing material Impact-resistant plastic
    Degree of protection IP55
    Dimensions 147×92×152 mm
    Control element STOP push button in the cover
    Installation Surface-mounted
    Operating temperature -25…+55 °C
    Storage temperature -25…+70 °C
    Altitude above sea level up to 2000 m
    Warranty period 5 years
    Service life at least 15 years

    Main functions

    • IP55 housing – protects FMP32 against dust and water splashes when mounted at the equipment.
    • STOP push button in the cover – the motor is switched off quickly without opening the enclosure.
    • Designed for FMP32 – suitable for the entire FMP32 range from 0.16 to 25 A.
    • Impact-resistant plastic – durable in workshop, warehouse and agricultural environments.
    • Surface mounting – the breaker can be installed right next to the motor, without a separate control panel.
    • Operating temperature -25…+55 °C – suitable for unheated rooms and attics.

    Where is it used?

    • Local pump or fan motor starter
    • Woodworking or metalworking machines in workshops
    • Compressors and hydraulic power units
    • Grain conveyors, augers and fans in agriculture
    • Conveyors in warehouses and logistics centres
    • Concrete mixers and construction site equipment (under a canopy)
    • Water borehole pumps in plant rooms

    On-demand operation

    For electricians of farms and agricultural buildings.
    IP55 enclosure with FMP32 – a simple local motor starter for grain augers and fans.
    For installers of machine tools and workshop equipment.
    The STOP push button in the cover allows the machine motor to be stopped quickly without opening the enclosure.
    For installers of pumping stations and boiler rooms.
    FMP32 + BFS1 replaces a separate panel for the protection and control of a single pump.

    Practical application

    If a 1.5 kW 400 V motor with a rated current of about 3.5 A needs to be protected in a workshop, then FMP0400 (2.5–4 A) is set to 3.5 A and mounted in a BFS1 enclosure next to the machine, and the STOP button in the cover is used for quick shutdown.

    Application guide: how it is used in practice

    BFS1 with FMP32 forms a local motor starter – only the FMP32 range is selected according to the motor current:

    Site What is connected Result Installer's note
    Machine tools in workshops FMP32 according to motor In, 3-phase supply Local start and STOP at the machine Route cables through sealed glands
    Pump in a plant room FMP32 + auxiliary contact F/ACt-1-11 Protection and status signal to the controller Select the auxiliary contact before installation
    Agricultural fan or screw conveyor FMP32, cable with protection against mechanical damage IP55 dust protection In locations exposed to direct rain, use a canopy
    Compressor FMP32 according to motor current Local overload and short-circuit protection Coordinate the setting with the starting current

    How to select the enclosure and FMP32 breaker

    Requirement / motor current Recommended model
    Enclosure with STOP button, IP55 BFS1 (with STOP button) ← this model
    Enclosure without STOP button, IP55 BF1 (147×92×95 mm)
    Motor current 0.16–0.25 A FMP0025 (FMP32 0.16–0.25 A)
    Motor current 0.25–0.4 A FMP0040 (FMP32 0.25–0.4 A)
    Motor current 0.4–0.63 A FMP0063 (FMP32 0.4–0.63 A)
    Motor current 0.63–1 A FMP0100 (FMP32 0.63–1 A)
    Motor current 1–1.6 A FMP0160 (FMP32 1–1.6 A)
    Motor current 1.6–2.5 A FMP0250 (FMP32 1.6–2.5 A)
    Motor current 2.5–4 A FMP0400 (FMP32 2.5–4 A)
    Motor current 4–6.3 A FMP0630 (FMP32 4–6.3 A)
    Motor current 6–10 A FMP1000 (FMP32 6–10 A)
    Motor current 9–14 A FMP1400 (FMP32 9–14 A)
    Motor current 13–18 A FMP1800 (FMP32 13–18 A)
    Motor current 17–23 A FMP2300 (FMP32 17–23 A)
    Motor current 20–25 A FMP2500 (FMP32 20–25 A)
    Rule: the enclosure fits only FMP32 (up to 25 A); select the breaker so that the motor rated current is in the middle of the FMP32 setting range; FMP80 (25–80 A) does not fit this enclosure.
    When to choose another solution: enclosure without STOP push button – BF1; motor protection circuit breakers FMP32 (FMP0025–FMP2500); auxiliary contacts F/ACt-1-11, F/ACt-1-20, F/ACs-1-11, F/ACs-1-20; signal contacts F/ALCs; shunt trip releases F/SRs230, F/SRs400; undervoltage releases F/UVs230, F/UVs400.

    Pros

    • IP55 protection against dust and water splashes
    • STOP push button in the cover
    • Suitable for the entire FMP32 range
    • Impact-resistant plastic housing
    • Operating temperature -25…+55 °C
    • No separate control panel needed for a single motor

    Cons / limitations

    • Suitable only for FMP32 – FMP80 (25–80 A) does not fit
    • Not intended for direct rain and aggressive chemicals without additional protection
    • FMP32 breaker and cable glands are ordered separately
    • Cheaper option without STOP button – BF1

    Safety and installation notes

    • Installation and connection must be carried out by a qualified electrician with the power disconnected.
    • Before opening the enclosure, disconnect the supply upstream of FMP32 – the terminals carry 400 V.
    • Route the cables in through suitable sealed glands to maintain IP55.
    • Set the FMP32 to the motor rated current from the motor nameplate.
    • Connect the protective conductor (PE) to the motor and equipment housing.

    Quick selection guide

    FMP32
    IP55
    STOP push button
    147×92×152 mm
    plastic
    -25…+55 °C
    Suitable when you need:
    • FMP32 needs to be mounted at the motor without a separate control panel;
    • there is dust or water spray at the installation location;
    • a quick STOP push button on the enclosure is required.
    Check before use:
    • whether the motor current falls within the FMP32 range (up to 25 A);
    • whether a STOP push button is required (BFS1) or BF1 is sufficient;
    • the size and number of cable entries.
    Important reminder: BFS1 is intended only for FMP32; the FMP32 breaker is not included and is ordered separately according to the motor current.

    FAQ

    Which circuit breakers is BFS1 suitable for?
    BFS1 is intended for Promfactor FMP32 motor protection circuit breakers from 0.16 to 25 A.
    What is the enclosure protection rating?
    The enclosure has an IP55 degree of protection.
    How does BFS1 differ from BF1?
    BFS1 has a STOP button in the cover, while BF1 is an enclosure without one.
    What are the enclosure dimensions?
    Enclosure dimensions 147×92×152 mm.
    Is the FMP32 breaker included?
    No, the FMP32 switch is ordered separately according to the motor rated current.
    At what temperature can it be used?
    The enclosure is designed for operation at temperatures from -25 to +55 °C.

    Protective enclosure with STOP button for motor protection circuit breaker | FMP32 | 147×92×152 mm | IP55 | Promfactor Baltic | BFS1

    Promfactor Baltic BFS1 (BFS-1) – IP55 protective enclosure with a STOP push button for the FMP32 motor protection circuit breaker, 147×92×152 mm, impact-resistant plastic – for a local motor starter in workshops, farms and pumping stations.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Transparent square protective window cover | 107×124×33 mm | IP67 | for distribution boxes | NTL1086
    Code: NTL1086

    Transparent hinged square protective window for devices, 107×124×33 mm, IP67. Mounted in a cut-out in the lid of a board or enclosure.

    Price 15.84 € VAT incl.
    ( 13.09 € VAT excl. )
    Plastic surface-mounted hermetic electrical distribution panel | box | 16 modules | halogen-free | with sealing option | 210x300x130mm | transparent doors | IP65 | TEM
    Code: 920.2130.132.016

    The plastic surface-mounted hermetic electrical distribution panel (model TEM 920.2130.132.016) is specifically designed to ensure efficient electricity distribution and safety in various industrial and commercial environments. This panel is made of high-quality plastic, which is lightweight yet durable and resistant to external environmental factors.

    Price 27.72 € VAT incl.
    ( 22.91 € VAT excl. )
    Transparent protective window cover for modular devices | 16 modules | 304×95×28 mm | IP67 | for distribution boxes | NTL1016
    Code: NTL1016

    Transparent hinged protective window for 16-module devices, 304×95×28 mm, IP67. Mounted in a cut-out in the lid of a distribution board or enclosure.

    Price 27.19 € VAT incl.
    ( 22.47 € VAT excl. )
  • privacy policy

    Information